May 20, 2013

RELEASE: ZMAX PCB (aka DNA’ish Style) – $20.00

…its Madvapes

I say DNA’ish because its currently the only China DNA style PCB available.   These are the Zmax PCB board for those that want to make their own VW mods.  The title says Variable Voltage, but it is a Variable Wattage PCB.



ZMax Variable Volt PCB

This is the Rev. 2 circuit board to make a variable volt mod with the same functionality as the ZMax.  This will create a variable power mod because you have the option of adjusting either your voltage or your power (watts).  The PCB allows adjustments from 3.0 to 6.0 Volts in .1 volt increments or 3.0 to 15 Watts in .5 Watt increments.  It has a maximum output of 4 Amps. The Rev. 2 Zmax has one extra menu item (8) which enables you to switch between RMS and mean value voltage monitoring.  The RMS mode is more accurate because it samples the output Voltage repeatedly while it is powering an atomizer or cartomizer.  It is with these measurements that it is able to adjust for heat related Voltage drift.

The PCB can read your output voltage, battery voltage and cartomizer / atomizer resistance.  In addition there are on/off features for both the device and the display.  The entire menu for this device is accessed with just a single button making it a good option for smaller mods where multiple buttons would be too bulky.





Similar Posts

Comments are closed.