Monthly Archives: April 2014

THE QUASAR REPLICA DRIPPER – $8.37


Replicated after one of the finest drippers on the market.   I own a few legit Quasars and I love them.  Now available in both stainless steel and brass – if you love drippers pick yourself up a few! You wont be disappointed.   At this price I picked up both styles.

THE HARD COPY:

  • Compatible with 510 drip tip (510 drip tip sold separately)
  • 2 air cuts
  • Air flow adjustable
  • Triple-post design
  • Stainless steel posts and 510 contact pin
  • Height without drip tip: 30mm

 

WHERE: >> HERE <<

$8.37

MONSTER: THE KANGER MEGA AEROTANK – $35.99 – FREE SHIPPING

Kanger has finally come out with a mega sized pro tank.  This is their answer to the Aspire Nautilus tank and the reviews are really good.     These come with both Pyrex and stainless steel tanks which is a nice bonus.

The Kanger Mega Aerotank is the accumulation of all the best things from the Protank and Aero series. Like its predecessor, this clearomizer comes with food grade stainless steel, pyrex glass, and dual coil heads. The Kanger Mega Aerotank also comes with an upgraded airflow control base to really maneuver blasts of flavor. This genuine Kanger Aerotank Mega should be the go to for any serious vapor!

The Aerotank Mega includes: 

  • Upgraded Kanger airflow control base
  • 510 threading
  • 3.8 mL capacity
  • Pyrex tank and stainless tube (glue free)
  • Bottom dual coil atomizer heads

 

Airflow Control: Turn the air control valve at the base of the tank clockwise to decrease airflow. To increase airflow, turn the air control valve counter-clockwise. 

Package contents: 

  • 1 x Kanger Aerotank Mega (Pyrex tank, top cap, bottom cap and Airflow control 510 base)
  • 1 x Stainless tube
  • 1 x Glass tube
  • 1 x 510 drip tip
  • 2 x dual coil 2.0 ohm atomizer heads
WHERE: >> HERE <<

USE COUPON CODE YEAHBABY TO BRING THE TOTAL TO $35.99
FREE SHIPPING ON ALL ITEMS

BACK IN STOCK: THE STILLARE REPLICA – $15.99

A Very fine dripper at a great price!

This rebuildable dripping atomizer is made from a stainless steel material, has three posts which are gold plated as well as the screws. The 22mm diameter and 510 threading connection allows to sit flushed with most mechanical mods or devices to provide a superior vapor production. Each Stillare atomizer is equipped with an engraved logo and individually numbered.

 
THE HARD COPY:
  • Stainless steel
  • Single or dual coil setups
  • 3 posts
  • 24k gold plated center post
  • 24k gold plated screws
  • 22mm diameter
  • 510 threaded
  • Engraved logo
  • Individually numbered
  • Drip tip NOT included in this deal

WHERE: >> HERE <<

$15.99

3 FOR $29.99 : THE US18650VTC5 SONY 18650 – 2600MAH / 30A + FREE JUICE


Here they are!  The brand new US18650VTC5’s are the latest greatest offering from Sony.  These have a full 500mAh more than there previous offering.  These run at 30amps This deal is for a 3 pack.


THE HARD COPY:

  • nominal capacity: 2600mAh
  • rated capacity: 2500mAh
  • Continuous maximum charge current: 4A
  • Continuous plus charge current: 12A
  • 30A max continuous discharge
  • 18mm diameter
  • 65mm length
  • Nominal voltage: 3.6V
  • Charge voltage: 4.20±0.05V
  • Cut-off voltage: 2.5V
  • Flat Top


WHERE: >> HERE <<

$29.99 

VA PHARAOH STYLE DRIP TIPS IN BLACK – 5 FOR $7.76

The moment I saw these – in to the cart they went!

Modeled after the Pharaoh drip tips by Vicious Ant – these are stunning! Short with a wide bore mouth. The short and wide drip tip does have an effect on your vape – by allowing more vapor to flow.   I find these work great on everything from a rebuildable to a Protank.   A great deal for just over $1.00 ea.

Made of stainless steel with black PVD.

WHERE: >> HERE << 

$7.76 FOR 5

BLOWOUT: FLAVORZ BY JOE – 50% OFF ($5.00 PER 15ML)

A great deal for those ejuice horders!

Flavorz by Joe is known for some excellent juices.  Normally priced at $9.99 per 15ml – Suvapers is discounting the entire line at 50% off.  If your a big fan of Flavorz by Joe – now is the time to stock up and save!  You wont find these prices again.   

This will not last long and certain nic levels will run out quickly.

WHERE: >> HERE << 

USE COUPON CODE flavorz TO TAKE 50% OFF
THIS COUPON ONLY WORKS WITH FLAVOZ BY JOE

THE BIG BOY: THE 26650 BLACK AND COPPER STINGRAY – $26.42

Let me start by saying these rock!   I got a few in a CoOp and I’m really loving it.   Built rock solid and they also look fantastic – a very sexy mod.  I also paid twice this price.   If your looking to get into a 26650 device or need another for your collection – this is a fine choice.
 
THE HARD COPY:
  • Brass contacts
  • 510 threading connector
  • Houses single 26650 battery (battery sold separately)
  • Laser engraved logo
  • 2 vent holes on the tube
  • Adjustable positive contact pin
WHERE: >> HERE <<
$26.42

WTF: JOYETECH LETS YOU UPLOAD PICTURES TO YOUR MOD

 

 

 

 

Congratulations Joyetech you have now made it possible for horny trolls to display their junk for the world to see on their PV.   

…and put their mouth on it.

FAIL!

THE MINI: 20 WATT BOX MOD W/ BATTERY PACK – $62.25

 
THE HARD COPY:

  • Variable Watt battery pack that lets you control wattage not voltage, for better consistency and repeatability. Built using quality components. Body is made of 6061 Billet Aluminum. Power regulated digital switch-mode DC-DC converter. It features a small OLED display, buttons and synchronous rectification for maximum battery life and minimal heat generation. The separate UP and DOWN allow the user to increase or decrease the power level in .1 Watt increments. Built in  Charger, which is Micro-USB powered and provides a 500 milliamp charge current. 
  • Battery must be installed in the proper position. + Positive side of battery towards the top of the device.
  • Damage can occur if the battery is installed improperly. 
  • Built in 1500mah Lithium Polymer battery
  • Operating discharge temperature: -10 – +60 Degree Celsius
User guide:
  • Normal Operation Watt Setting: The power level currently set on the board
  • Battery indicator: The current state of charge of the battery
  • Volts display: The current or most recent output voltage being supplied to the atomizer
  • Ohms display: The resistance of the atomizer attached to the device. This is measured only when the unit is supplying power to the atomizer. At other times, it shows the most recent measurement
Other modes:
  • Locked mode: Pressing the fire button five times with less than .7 seconds between presses will cause the device to enter “Locked mode”. In Locked mode, the device will not fire and the output power will not adjust accidentally. While in Locked mode, the screen will be off, except that pressing a button will show “Locked, click 5X”. To exit Locked mode, press the fire button 5 times
  • Stealth mode: While locked, pressing the fire and down buttons simultaneously for five seconds will switch to stealth mode. In this mode the display is off. It will still show error messages and the “Locked, Click 5X” advisory. To switch back to normal display mode, from locked mode hold down the fire and down buttons simultaneously for 5 seconds. This setting is stored to internal flash memory, and remains if power is removed
  • Right Mode and Left Mode: While locked, holding the fire and up buttons simultaneously for 5 seconds flips the display. This setting is stored to internal flash memory, and remains if power is removed
  • Error Messages: The board will indicate a variety of error states
  • Shorted: The atomizer or wiring are short circuited
  • Check Battery: The battery is below 3.1 volts. It probably needs to be charged
  • Weak Battery: The battery sags excessively when firing. This typically means the user is not using a high rate battery, or the battery is old and degraded. It can also mean the battery is not making good contact
  • Too Hot: The board has onboard temperature sensing. It will shut down and display this message if the internal board temperature becomes excessive
  • Auto power down: The screen will be at full brightness while firing. After 15 seconds with no button presses, the screen will dim. 4 minutes after the last button press, the screen will fade out and the device will go to sleep mode. Pressing any button will turn the device and display back on


WHERE: >> HERE <<

$62.25

USA DEAL: INNOKIN ITASTE MVP2 KIT – $38.90 + FREE SHIPPING



The last run was huge and now they are back in stock with colors.


I OWN TWO. LOVE THEM!

The original MVP was a huge success and is still a very popular mod.  The new version is a variable wattage version with some nice upgrades.  For the price its a complete no brainier.

  1. Variable Voltage / Wattage
  2. Ohm reader/checker
  3. Improved Button
  4. Comes with Iclear30’s rather then Iclear16’s


IN THE BOX:

  • MVPv2
  • Iclear30
  • Charging cable
  • Beauty ring
  • clear jewel case



WHERE: >> HERE <<

$38.90

MOD ENVY: FDA REGULATIONS WITH GREG CONLEY (OVER 1,000 ATTEND)

 





The largest vaping show in the community gets the first interview with Greg Conley.
The interview went very well with over 1,000 people attending this show.

Greg comes on at 59:40 into the program
 

DROP: TREE OF LIFE REPLICA W/ ALL TUBES – $30.61

 

The Tree of Life mod clone by Infinite is a very unique mod made from 100% stainless steel. The 18350, 18500 and 18650 feature intricate laser engravings that display the representation of the tree of life and the inside of the firing button is engraved with a unique serial number. The Infinite Tree of Life mod clone has a reverse threaded locking ring which also has intricate cut notches for improved grip and to match the airflow grooves located on the top cap. The Infinite Tree of Life mod clone has copper contact pins which provide a very low voltage drop and the telescopic postive pin allows you to use a variety of batteries. The Infinite Tree of Life mod clone has 3 different sized 100% stainless steel seamless battery tubes that accommodate you to use an 18350 battery, 18500 battery and 18650 battery. It has a 510 threaded atomizer connection which will fit most atomizers and is 22mm in diameter.  

THE HARD COPY:

  • -100% Stainless Steel Body
  • -No Circuit Board (True Mechanical Mod)
  • -Laser Etched Engravings and Logo
  • -Telescopic Atomizer Contact Pin
  • -Copper Atomizer Contact Pin
  • -Copper Firing Pin
  • -Bottom Firing Button with Reverse Threaded Locking Ring
  • -3 100% Seamless Stainless Steel Tubes for 18350, 18500, and 18650 Batteries
  • -510 Atomizer Connection
  • -22mm Diameter
WHERE: >> HERE << 

$30.61

RESIST: WE ARE THE UNDERGROUND – VIDEO


 

BACK IN BLACK – KAYFUN LITE REPLICA IN PVD BLACK – $14.77

The perfect mate for your black mechanicals, Here’s a Kayfun Lite Styled RBA with a black finish. The color is a PVD (particle vapor deposition) finish that is known for being as durable as it is attractive. Atomizer is constructed of stainless steel, with a polycarbonate clear tank section, and features a bottom screw fill-hole. Holds 4.5 ml.

THE HARD COPY:

  • Standard 510 drip tip
  • Polycarbonate(PC) tank section
  • 510 threaded connector
  • Bottom screw fill-hole
  • Height without drip tip: 56mm
WHERE: >> HERE << 

$14.77

REPLICA: OROCHI MOD by RAI VAPES – $22.92

The Orochi mechanical by Rai Vapes has been replicated.   An extremely sexy mod with simple lines and aesthetics.   Clean and simple are all the rage — and this mod is a prime example.  Great looking mod!

  • Brass contacts
  • Twist locking system
  • 510 threaded connector
  • Powered by 1*18350 battery/1*18650 battery (batteries sold separately)
  • Random serial number
  • With battery air cuts

  

WHERE: >> HERE << 

$22.92