Monthly Archives: July 2014

BUILT TO QUAD – UNIQUE DESIGN: NUCLEAS 1:1 REPLICA RDA – $12.85

http://shrsl.com/?~64l5
The reviews are in. Users of this 1:1 replica are impressed. We were intrigued by the unique design. The Nucleus styled atomizer takes a different approach to positive and negative posts. The center post section is completely removed to build it, giving you all the room in the world to maneuver and tweak. The top section offers two positive connections, and the bottom section is your negative connections. When built the entire section is replaced and held in place by the single large-head screw. Six air-holes in the outer cap can be lined up with either four or two holes in the inner cap. Some users are indicating they would like more airflow for the aggressive quad builds. This blogger suggests that adding a single center air-hole on the inner ring would allow you to utilize all six of the holes on the cap. A simple solution that doesn’t risk chipping or scratching the finish on the cap. Constructed of stainless steel with 24K gold plated brass components.

THE HARD COPY:

  • 1:1 clone
  • 22mm diameter
  • Removable 510 drip tip
  • Dual-coil or quad-coil setup
  • Air flow control, with 6 air holes on the sleeve
  • Silver plated brass top cap, with CNC engravings
  • Laser engraved serial number on the bottom
  • Height without drip tip: 25.5mm
  • 510 threaded connector

WHERE: >> HERE <<

$12.85

USA DEAL: TWO SONY 30AMP / 2100MAH 18650s – $15.84 + FREE SHIPPING

http://bit.ly/1nJhkFQ

 

The 4th incarnation of the Sony 18650.
Terrific for sub-ohm builds, these Sony US18650VTC4 18650s are rated to 30 Amps. 
These have great ratings.  The price rocks for a USA seller – this price includes free shipping!

 

THE HARD COPY:

 

Sony US18650VTC4 18650 30A Drain Unprotected Lithium Ion Flat-Top Battery
The Sony VTC4 battery is perfect for any 18650 compatible devices. Additionally these batteries are a great choice for experienced vapers using sub-ohm coils. 

Features:

  • 3.6 Volt
  • Cut-off Voltage at 2.5 Volts
  • Fully Charged at 4.2 Volts
  • 30A Drain
  • 2100 mAh
  • Flat-Top Battery
  • Safe Chemistry

WHERE: >> HERE <<

$15.84 free shipping

ROLLOUT: THE KRYPTONITE 22650 / 18650 MECHANICAL – $52.24

 

The true meaning of beauty and the beast.  
A very beautify mod, but massive in size and weight.

The Kryptonite is a thick and heavy duty piece that looks very unique. This mod is made with both Stainless Steel and Brass to achieve an amazing look. It can fit either a 26650 or an 18650 with the provided battery adapter. The pins are silver coated copper for low voltage drop. The top pin is spring loaded that automatically adjusts with your atomizers. This mod weighs over 1lb, so if you’re looking into building some muscle while vaping, this mod is for you.

THE HARD COPY:

 -height 114mm
-diameter 34mm
-3mm lower tube thickness
-1.5 upper outer tube thickness
-2mm upper inner tube
-design diameter 36mm
-made of 304 stainless and brass
-2 tone mod for elegant look
-serialize, engraved logo and design
-12 working hours machine work
-positive 10mm silver coated contact
-negative 12 mm silver coated contact
-fits 26650 and 18650 battery
-delrin insulator
-spring loaded auto adjust positive contact
-510 thread
-locking mechanism
-all materials came from solid brass shaft and stainless

WHERE: >> HERE <<

USE COUPON CODE 5OFF TO BRING THE TOTAL TO $52.24

BIG CAPACITY: VAPPOWER 20 AMP / 5200mAh – 26650 BATTERIES – 2 FOR $22.77

This HUGE capacity battery sports a 20 amp rating.   If you compare these to an MNKE or EFEST 26650 – it has the same AMP rating but sports almost 2000 more mAh.    I bought a few pairs, and word is these hold up to their mAh rating.

These have continues discharge of 20A and burst of 30A.   
Plenty of amperage for the average vaper or sub-ohm vaper.

This pair of batteries include a battery case.

WHERE: >> HERE <<

USE COUPON CODE BLF TO BRING THE TOTAL TO $22.77 FOR 2

FREE BATTERY CASE

THE NEXT LEVEL: THE 26650 CERBERUS RDA REPLICA – $15.88

http://shrsl.com/?~64b5
http://shrsl.com/?~64b5
The Cerberus is a very versatile atomizer.   Its built as a standard RDA but it also can be a hybrid atomizer to the Hades and King 26650 mechanicals.   This exotic 6 post design allows for maximum built potential and its 6 air holes allow for maximum airflow!  A great atomizer for a great price!

THE HARD COPY:

  • Compatible with 510 drip tip (drip tip sold separately)
  • 6-pole design
  • 6.5mm deep drip well
  • Air flow control, 3 air slits on the sleeve
  • Remove the 510 thread base to expose the hybrid thread.
  • Brass contact (adjustable)
  • Hybrid mod size: 25.8mm

 

WHERE: >> HERE <<
 

$15.88

ROLLOUT: KATO SQUARE MECHANICAL BOX REPLICA – $75.99

With a design reminiscent of the VTR, meet a mechanical with a different look: 
The Kato Square Box Styled 1:1 mechanical mod. 
 
It houses a single 18650 battery and the 22mm ring up top protects your atomizer. 
Contacts, pins and springs are copper and brass. 


THE HARD COPY:

  • Full stainless steel construction-304
  • High quality 1:1 clone mod
  • Copper and brass connectors, pins, and springs
  • 18650 series battery (Two different mods)
  • Laser engraved and etched serial number and logo
  • Full mechanical mod


The diameter of the opening for the atomizer is 22mm

size: 83.6mmx50.3mmx22.8mm

WHERE: >> HERE <<

USE COUPON CODE 5OFF TO BRING THE TOTAL TO $75.99

JUST THE TIP: VAPELYFE STYLE DRIP TIPS (DOUBLE O-RING) – 5 FOR $9.52

http://shrsl.com/?~645d
Very hot drip tips. These drip tips feature a wide bore with double o-rings.  The double o-rings ensure a snug fit.  Get them in an economical 5-pack for just $7.49, or use the drop down box on site to get them individually for $2.37.

THE HARD COPY:

  • Stainless Steel
  • Double O-Ring
  • Laser etched Vapelyfe Logo
  • Sold in a pack of 5 or individual

WHERE: >> HERE <<

5 for $9.52

ENTER VERSION 2: THE 4NINE MECHANICAL FROM THE USA – $29.99

 

 

Now you can get the 4NINE VERSION 2 replica in Copper, Stainless Steel, or Black PVD.   Each are priced the same at just $29.99. Meet the highly anticipated 4 Nine Mechanical Mod replica; the “most compact mechanical design in vaping”. Three tubes fit together seamlessly to house any 18- series battery.

But here’s the best part: The cleverly designed top cap effectively turns any 510 atomizer into a hybrid by allowing the positive post to directly contact the battery. Cutouts in the tube allow the switch to be recessed but still very easily activated. 

VERSION 2 UPGRADES:

  • ENHANCED TOP CAP WITH LONGER 510 THREADING TO ACCEPT ALL 510 DEVICES.
  • ENHANCED MAGNETS
  • Body and Extension Tubes- Polished Copper
  • Top Cap – Direct 510 Connection with Atomizer to Lower Voltage Drop
  • Bottom Cap – Magnetic Firing Button
  • Can Accommodate 18350, 18490 and 18650 Batteries
  • Fine (0.5mm) Threading
  • Low Voltage Loss

WHERE: >> HERE <<

$29.99 ea

LOWER: EFEST 26650 32A / 64A BATTERIES – $13.90 – FREE SHIPPING

http://myurl.co/efest2660

Hot off the press we have the brand new Efest 26650.   These are the latest incarnation of their 26650 line – now packing a 64A pulse and 32A continues discharge rate.   With the Sony 50A (pulse) batteries discontinued and hard to spot fake MNKE’s being sold – these are bound to be a huge hit.  

I got one the other day at a vape meet and they hold up very well.  


THE HARD COPY:

  • Weight: 100g
  • Length: 65.11 mm
  • Diamter: 26.22mm
  • Top: flat top
  • Bottom:non-procted
  • Typical Capacity: 3500mAh
  • Min capacity: 3500mAh
  • Maximum discharging current: 32A
  • Maximum charging current: 6.5 A
  • Maximum pulse discharging current: 64A
  • Resistance: 13±2 mOhm
  • Battery WH: 125WH\Kg
  • Discharge cut-off voltage: 2.5V
  • Voltage: 3.8V
  • Full Charge voltage: 4.2V
  • Monthly Self-discharge rate:
  • Temperature range: Discharge: -20~+60 ºC, Charge: 0~45 ºC

WHERE: >> HERE <<

$13.90 + FREE SHIPPING

ROLLOUT: THE ASPIRE NAUTILUS MINI – VERITICAL COIL – $29.99 / $18.43

HOT OFF THE PRESS!

You have a choice in price in this deal.   
You can buy a legit version for $29.99 or the 1 to 1 clone for $18.43

THE HARD COPY:

The Aspire Nautilus Mini is the next big thing in the vaping world. This tank system uses a new type of coil technology that ensures proper saturation to the wicking material.. The Nautilus Mini uses a BVC (bottom vertical coil) that allows for much greater vapor production and extremely enhanced flavor. This bottom vertical coil unit is comparable to a stone age cartomizer in a sense that there is no wicking material that goes directly through the coil. The vertical coil is surrounded by wicking material on the outside, thus allowing airflow to be pulled straight through the center of the coil. Though this tank system does not use a dual coil, the vapor production from it tops any dual coil glassomizer that is currently on the market. Another huge advantage to this new coil technology is that the lifespan of the coil is much more exceptional than its predecessors. These new bottom vertical coils are also backwards compatible with the original dual coil units for the Aspire Nautilus, meaning that the old styled coil units will work properly in the Nautilus Mini and the new styled coil units will work properly in the original Aspire Nautilus. Adjustable airflow is almost a must in the vaping world today, and the Aspire Nautilus Mini offers a uniquely redesigned style of airflow control where pre-drilled air holes rotate on a ring that clicks into place for the user’s desired setting. The Nautilus Mini is constructed entirely of Stainless steel, with a pyrex tank section. Each part of the tank system can be disassembled for cleaning purposes also. All in all, the Aspire Nautilus Mini is a tank system that is a thing of pure beauty to witness. 

What’s in the box:

  • Fully rebuildable Aspire Nautilus tank
  • eGo beauty ring 
  • (1) 1.6 ohm dual coil atomizer head (attached in tank) 
  • (1) 1.8 ohm dual coil atomizer head 
  • Instruction manual

WHERE:

($29.99) LEGIT VERSION FROM THE USA: >> HERE <<

($18.43) 1 TO 1 CLONE VERSION – CHINA: >> HERE <<

THE DREADNAUT 26650 HYBRID DRIPPER – $55.10

Its finally here at a great price!  The Dreadnaut replica. This hybrid dripper is a MONSTER.  Taking a 26650 battery.  This a weighty, beefy mod.  If your battery dies the mod itself doubles as a personal protection device.

This thing has to weigh 3-4 lbs.

THE HARD COPY:

  • Hybrid 26650 tubular mod
  • The body is two-toned of stainless steel and brass, with full brass sleeves
  • Compatible with 510 drip tip (drip tip sold separately)
  • Tri-pole design
  • Air flow control (2 air slits on the AFC ring)
  • Deep juice well
  • Thread connected top cap
  • Has a total of 8 parts
  • Spring-loaded bottom firing button, without lock
  • Copper positive contact pin
  • Silver plated negative contact pin
  • With engraved logo and serial number on the firing button
  • Battery tube diameter: 30mm (just the SS tube, exclude the sleeve)
WHERE: >> HERE <<

$55.10

THE REVIEWS ARE IN: THE MAGMA RBA REPLICA – $15.79

http://shrsl.com/?~63sv


 

Here is a great deal on the Magma 1 to 1 replica. With tons of airflow provided by nine holes to choose from in a ring on the base, the airflow comes up from the base directly aimed at the coils. A deep juice well traps tons of juice to feed your thirsty build. Slotted posts make building a breeze, and frankly, the images on this look awesome. It appears to be a beautifully crafted replica, well worth the price. Users of the original claim to be very pleased with the performance and flavor, so we’ve got our eye on this one! It’s gonna be big!

WITH 139 REVIEWS IT GETS A 4.8 OUT OF 5

THE HARD COPY:

  • Stainless steel construction
  • 22mm in diameter
  • Two 3.97mm wide poles (screw type – shoot and screw) easier to rebuild and better conductivity
  • New technology – dual DIRECT TO COIL air-hole for maximized flavor and vapor
  • 9 air holes on the outer casing
  • Extended juice basin – can hold up to 40 drops of juice with minimal change of leakage (for a dripper)
  • Poles are welded to the base for durability
  • Positive insulator hidden in the base to avoid melting
  • O-ring less – to make it maintenance free
  • Dome chamber top cap for better flavor

WHERE: >> HERE <<

$15.79

LOWER: EFEST 26650 32A / 64A BATTERIES – $13.90 – FREE SHIPPING

http://myurl.co/efest2660

Hot off the press we have the brand new Efest 26650.   These are the latest incarnation of their 26650 line – now packing a 64A pulse and 32A continues discharge rate.   With the Sony 50A (pulse) batteries discontinued and hard to spot fake MNKE’s being sold – these are bound to be a huge hit.  

I got one the other day at a vape meet and they hold up very well.  


THE HARD COPY:

  • Weight: 100g
  • Length: 65.11 mm
  • Diamter: 26.22mm
  • Top: flat top
  • Bottom:non-procted
  • Typical Capacity: 3500mAh
  • Min capacity: 3500mAh
  • Maximum discharging current: 32A
  • Maximum charging current: 6.5 A
  • Maximum pulse discharging current: 64A
  • Resistance: 13±2 mOhm
  • Battery WH: 125WH\Kg
  • Discharge cut-off voltage: 2.5V
  • Voltage: 3.8V
  • Full Charge voltage: 4.2V
  • Monthly Self-discharge rate:
  • Temperature range: Discharge: -20~+60 ºC, Charge: 0~45 ºC

WHERE: >> HERE <<

$13.90 + FREE SHIPPING

LOWER: A MUST FOR REBUILDERS – CERAMIC TWEEZERS – $11.11

NOW AT A NEW LOWER PRICE.

The photo above is what inspired me to start looking into these.  You see what they are doing?  Making a micro coil right deck of the rebuildable – by firing the PV.  Since the tweezers are heat resistant (ceramic) it gives the user a whole new way to rebuild with ease.

These are very expensive.  Everywhere I looked they were $30-60.00 ea. 
Now they are ultra affordable!

If you rebuild – you need these.


WHERE: >> HERE <<

$11.11

BLEM SALE: DRAGON PROVARI’S ON SITE

A very hard Provari to get.

These Provari’s are only avialable in B&M’s.   They have never sold them online.  Today Provari has stocked the Dragon in their BLEM clearance section. 

For those looking to pickup a Dragon at a good price – get them while you can. 


Features of the ProVari Polished Dragon:

• Microprocessor controlled
• 2.9-6.0 variable voltage range with .1 volt increments
• Built-in digital display
• AccuSet™ Technology – Self-Calibration Feature
• Atomizer Ohm’s checker built-in
• Battery voltage checker built-in
• Translucent light-up pushbutton with low battery indicator
• Single battery design
• Stock 510 Connection
• Classy looking dragon design made of polished stainless steel
• 16 second safety cutoff
• Short circuit protection
• Reverse battery protection
• Thermal monitoring system
• Amperage limiting
• Battery monitor and over-discharge protection
• Machine engraved logo
• Vented for added safety
• Proudly made in the USA
• 1 Year warranty with optional 2 year warranty
• Measures – 3.49″ L X .90″ Dia.(without atomizer)
• Weight – 4.2 ounces (without battery)

WHERE: >> HERE <<