Yearly Archives: 2014

ROLLOUT: KANGER GENITANK MEGA – $16.49

http://myurl.co/kangergenni

Much like the original Aerotank Mega – these have the new airflow system that was brought out on the Aerotank Giant.   I find this airflow system a lot better.   These use the same exact heads as the aerotanks – so there is nothing extra to buy.  These sold 3.5ml of juice and comes with two replacement heads.   The tank is made of pyrex glass.

Features:

  • Improved design
  • New Airflow Control Valve
  • Upgraded Dual Coil: available in 1.2Ω / 1.8Ω Currently Kanger supplies two 1.8ohm dual coils
  • This is subject to change as Kanger is known to change the coils ohms packed in the boxes.
  • Pyrex Glass tube
  • Capacity: 3.8ml
  • 510 Threaded (May need a 510 to ego adapter for Mods)
  • Replaceable Atomizer Heads
  • Bottom Coil
  • Glue Free
  • 75mm Height
  • 22mm Diameter

WHERE: >> HERE <<

$16.49

CHEAPER THAN FASTTECH – CLOUPOR T5 – 50 WATT TUBE MOD – $77.94

http://myurl.co/cloupert5
http://myurl.co/cloupert5
I had the opportunity to check this mod out at Vapemania.  I was VERY impressed by it.  
Its so much nicer in person.  

I bought one from the vendor.

The makers of the VERY popular 30 watt aluminum box mod has come out with a new 50 watt tube mod.  This is the only 50 watt tube mod I’m aware of.  These us a single 18650 and recharge via a micro USB port.  The mod is made of a 6061 aluminum.

THE HARD COPY:

  • 510 threaded connector
  • Variable Wattage from 7W-50W in .1 watt increment
  • Body is made of anodized aluminum
  • OLED display shows battery percentage, watts, ohms, puffs, battery charging state, volts and CPU temperature
  • Powered by single 18650 battery (battery sold separately)
  • Micro-USB charging port
  • Compatible with 0.2ohm~3.6ohm atomizers
  • Input voltage/current: 3.2-4.3V/1.5-7A
  • Output voltage/current: 2-9.3V/10A
  • Battery compartment diameter: 18.7mm
  • 5 times click to turn on/off

WHERE: >> HERE <<

$77.94 + FREE SHIPPING

FOUND: THE EXTREMELY RARE SONY 50 AMP 26650 BATTERIES

http://bit.ly/1pF5HCB



FOUND!


These batteries are almost impossible to find.   I found a merchant that enough stock to put on this site.  The price is a bit on the expensive side, but thats supply and demand.  For those looking for the BEST 26650 battery going – now is your chance to get in on the deal.

Price comes with free shipping.   

THE HARD COPY: 

  • Li-ion 2600mAh 26650 cell  
  • Product Name :  SONY SE US26650VT  T C11 Lithium-ion Rechargeable Battery 
  • Model : 26650 ·  Nominal Capacity : 2600mAh
  • Diameter : 26.0mm 
  • Height : 65.0mm 
  • Weight(Typical) : 2.7 oz / 85g  
  • Charge Method: Constant Current and Constant Voltage(4.2V) 
  • Nominal Voltage : 3.7 V 
  • Max. Continuing Discharge Current : 50A
  • Internal Resistance : 16mOmh
  • Discharge Temperature : -20°C ~ +60°C

 

WHERE: >> HERE <<

LOWER: THE CLOUPER 150 WATT (UPGRADEABLE TO 200) BOX MOD $99

 


Now in new colors!

The new 150 watt box mod by Clouper is now up for sale.   China is pushing the limits on wattage and is coming out swinging with this new mod.   This mod uses two 18650 batteries.  The form of this box mod reminds me a lot of the IPV2/3.

The price is killer! You wont see it this low for very long.

THE HARD COPY:

  • Magnetic back cover
  • Upgradeable firmware(can be upgraded to 200w)
  • With Variable Voltage
  • Output power: 7W-150W
  • Output voltage : 5.6V—14V
  • 0.2-4.0ohm atomizer resistance
  • Reverse battery protection,adjustable center pin
  • With CPU temperature control system
  • Color: Black,blue,red and silver
  • Size:99*55*25mm

WHERE: >> HERE <<

$99

THE CASTLE SYLE COPPER MECHANICAL KIT – $24.12

http://myurl.co/castlemechanical

I love the castle mechanical mod.   It reminds me of mods like the Stingray X and Polidac because they have “pants”.  You can slip the SS tube over the copper inner tube to give the signature look.  The top cap of the Castle is beefy with that classic castle tower look.  The kit comes with all 3 tubes and 3 pants for all battery sizes.  The case it comes in is pretty bad ass too – a steal at just $24.00.

THE HARD COPY:

  • Copper top cap + battery tube + locking ring
  • Stainless steel sleeve + bottom cap
  • 510 connection
  • Chromed brass contacts
  • Positive contact is adjustable
  • Bottom spring-loaded firing button, with reverse-threaded locking ring
  • 6 air holes on the bottom cap
  • 18650 +18500 + 18350 full set tubes
  • With logo engravings on each tube
  • Tube internal diameter: 18.7mm
  • Tube external diameter: 22mm
WHERE: >> HERE <<
$24.12

FOR THE LAZY – 50 PACK PRE-BUILT SUB-OHM COILS – $3.60

http://myurl.co/cotton
So if you lazy like me – you hate building coils.

Today you can get 50 coils built at .35 for jut $3.60.   These come with cotton wicks.  What type of cotton is unknown so I’d advise against using the wicking material.  The cotton is a good way to separate your coils if you have them all mashed together, but before you vape – replace this wicking material with something you more familiar with.

WHERE: >> HERE <<

$3.60 for 50

MTBAKERVAPOR – 13.9% OFF ALREADY LOW PRICES

http://myurl.co/mtbaker1309


 

Mtbakervapor is doing a nice discount coupon!

To celebrate labor day – they are doing 13.9% off.   With their juice prices already being one of the lowest in the industry – the discount makes them insane! Stock up now and save!  Buy your month(s) supply today and save big!  Some of my favorites are the Solar Flare, Lightning, Ecto Cooler, Hazelnut, Straight Tobacco, and Moo Juice.  Also be sure to check out their GWAR line of juice!

This is a site wide coupon so it works on hardware too. 

WHERE: >> HERE <<

USE COUPON CODE laborday14 TO TAKE 13.9% OFF YOUR TOTAL ORDER 

BACK UP COUPON:
USE COUPON CODE VAPORJOE TO TAKE 10% OFF YOUR TOTAL ORDER
 

IVOGO KAYFUN MINI + SLIM NEMESIS KIT – $33.70

Looking for something slim, sleek, stylish and that can deliver a great vape? Meet the IVOGO Baby Kit. It’s a mini Nemesis style mechanical mod with tubes to house either a 14500 or 14650 battery, paired with a Kayfun Mini 2.1 ES Styled atomizer, and boxed as a set.

THE HARD COPY:

Atomizer features:

  • Stainless steel construction
  • Removable 510 drip tip
  • Adjustable air flow
  • 510 threading connector
  • Height without drip tip: 65mm
Mod features:
  • It is a Nemi Nemesis style mechanical mod
  • 510 threading connection
  • Chromed brass contacts
  • The contact on the top cap is adjustable to both directions so the atomizer will sit flush with the top cap and the battery will not rattle
  • Sliding AFC ring on the top cap (4 air holes)
  • Bottom spring loaded firing button, the locking ring is NOT reverse threaded
  • 4 battery vent holes beneath the locking ring
  • Laser engravings
  • 14.4mm inner diameter
  • 17mm outer diameter

WHERE: >> HERE <<

$33.70

NEW BATTERY: THE PV IMR 18650 30AMP BATTERY – $6.64

PVTSO High-Amp batteries are the definitive battery for the mechanical-mod user. Not only are these the safest batteries available, they also perform better for a longer period of time. The high amp-limit on these batteries means you can build sub-ohm coils without fear of the batteries venting. Although these are 1600mAh batteries, they can hold a charge above 3.7-volts for much longer than other IMR batteries, which means hours of use before a noticeable difference in voltage compels a battery change. These batteries will perform just as well in an APV or Variable Voltage/Variable Wattage mod, although the advantages won’t be as apparent. If you like to build your own sub-ohm coils on a mechanical mod, you won’t believe the performance and battery life these cells offer.

THE HARD COPY:

Maximum Continuous Discharging Current: 30 A
Maximum Pulse Discharging Current: 45 A
Maximum Continuous Charging Current: 3A
Brand Name: PVTSO
Size: 18650
Type: Li-Mn (High Drain)
Rated Capacity: 1600mAh
Nominal Voltage: 3.7V
Peak Voltage: 4.2V
Cut-off Voltage: 2.5V
Dimensions: 18.3mmX65mm
Rechargeable: Yes
Protected: No
Chemistry: Lithium manganese Dioxide (Li-Mn02)
Style: Flat Top
Color: Yellow
Rated Capacity: 1600mAh

WHERE: >> HERE <<

USE COUPON CODE ECF5OFF TO BRING THE TOTAL TO $6.64

KAYFUN KILLA: THE ORCHID STYLE GRAVITY FED TANK – $18.32

http://myurl.co/orchid

Here’s a great deal on the Orchid styled gravity-fed rebuildable atomizer. With similar function to the kayfun styles, the Orchid features an ideal setup for dual coils, with four channels to feed juice to your thirsty build. More juice, more vapor, more flavor! Attractive styling and a durable PMMA tank make it a great looking atty for your setup.

THE HARD COPY:

  • Compatible with 510 drip tip (drip tip sold separately)
  • Quad-pole for dual coil build
  • 4 wick channels
  • 2 air holes
  • 510 connection (brass contact)
  • Laser engravings on the chimney


WHERE: >> HERE <<

$18.32

FROM THE USA: THE CLOUPER 150 WATT BOX MOD $110.19

A rebuilders dream!

Single, Dual, or Quad coil setup
In Copper or Stainless steel
Unique design with no negative posts, the entire outside of the atty is the negative ‘post’. Wires are secured by a removable stainless steel ring. Delrin insulated drip tip with stainless steel accent and unique side venting to prevent spit back and create a vortex inside of the cap. Adjustable air control and direction flow outer cap. By lining up the different configurations, it can produce 1,2 or 4 adjustable sized vent holes depending on your build. 
 
THE HARD COPY:
  • Removable top cap for easy access to wicks
  • Air fin cooled top cap to reduce heat
  • Adjustable air control and direction flow outer cap. By lining up different hole configurations, it can produce 1, 2, or 4 adjustable sized vent holes depending on your build
  • Entire outside of atty is negative post. Wires are secure by removable stainless steel ring
  • Deep juice well (approx. 4.1mm)
  • PE 510 drip tip with stainless steel accent
  • Unique side vented drip tip to prevent spit back from coils and create vortex inside of cap
  • Conical internal top to enhance flavor
  • Stainless steel center post
  • Copper 510 center pin
  • 22mm diameter
  • Height without drip tip: 31.2mm

 

 
CHINA ($11.49):  >> HERE <<
 
USA ($15.99 SS ONLY): >> HERE <<

MORE POWA: CHINAS 180 WATT / TRI 18650 BOX MOD

Seems China is pushing the limits on wattage everyday.  We just announced a 150 watt box mod coming from Clouper, and now this.   This box mod will hit a maximum of 180 watts and uses three 18650 batteries.   Its unknown what chip-set they are using – but when its released you know people will be putting to the test to make sure its accurate. 

In terms of looks – I think its smart.

CHECK IT OUT:  >> HERE <<

DOMINATE: PERSEUS 26650 GENNY TANK – $22.64

Been waiting for a hot genny-style atomizer to fit your 26650 mods? Here it is. It’s the Perseus styled rebuildable tank atomizer, and it will look dynamite atop any setup. A glass 3 ml tank feeds a two wick setup with smaller fill hole in the deck. The positive post has its drilled post connection near the deck and the two drilled negative posts, have their holes drilled higher. The tank is protected by a steel sleeve with cutouts and the three part cap features an adjustable airflow, and the matched drip tip is included. Constructed of stainless steel with a sand=blasted finish and polished accents.

Comes with two pre-coiled silica wicks, two stainless steel rope wicks, spare o-rings, and a building guide (referred to as the “blanking pin” allowing you to create perfectly sized and shaped coils without the need to raid your drill bit collection.

THE HARD COPY:

  • Stainless steel 510 drip tip
  • Sliding air flow adjustable, 2 air holes or 4 air holes option
  • Top refill
  • Triple posts design, stainless steel posts with Phillips head screws
  • Two wick holes
  • 3.0ml juice capacity
  • Glass tank with stainless steel sleeve
  • 510 threading connection
  • 29.5mm external diameter
  • Height without drip tip: 48.5mm
  • Laser engravings

 

WHERE: >> HERE <<
$22.64
 

PROJECT SUBOHM: COMPETITION RDA BY CONGREVAPE – $26.99

http://www.vapordna.com/ProductDetails.asp?ProductCode=PSD010&Click=98
Two USA Companies; One Common Goal: To Bring Innovation, Originality, Affordability, and Functionality to the vaping community! Project Sub-Ohm™ X Congrevape Are Proud to Bring You A True Ultra Affordable Cloud Chasing Machine: The Competition Doge RDA Project Sub-Ohm™ Edition! This RDA is designed from ground up to have sufficient juice delivery, high conductivity, and outrageously large airflow system. The huge cloud produced from this RDA is something you need to experience to understand! Are you ready for the ultimate cloud chasing experience?

Competition Doge by Project Sub-Ohm™ X Congrevape

Designed from ground up, the Competition Doge RDA is an all US Designed RDA, features massive dual cyclops airflow channels, you will never be hurting for more airflow again!

Product Features:

  • Adjustable Airflow holes are 11mm wide, that is the biggest airflow we have seen on an RDA!
  • The Deck has no airflow restrictions
  • Negative Posts are milled to the base so you are getting the maximum conductivity and durability
  • 8 Cooling Fins: We believe 8 Fins are the perfect layers to cool down even some of the hottest vape
  • Interchangeable components with many other popular 22mm Atomizers
  • Huge Post Holes to fit some of the thickest wires
  • Conical Designed Top Cap to create that perfect flavor
  • Beautifully Engraved with Project Sub-Ohm™ Logo and “WOW” on the bottom of the RDA
  • Copper bottom center pin only for maximum conductivity
  • Thick screws for ease of build
  • Deep Juice Well
  • 3 Piece Design
  • Serialized for that personal touch
  • Matches All Other Project Sub-Ohm Products
  • Original & Affordable
  • Designed In USA
  • Presented to you by Project Sub-Ohm™ X Congrevape

WHERE: >> HERE <<

USE COUPON CODE JOE10 TO BRING THE TOTAL TO $26.99

IN COLOR: THE TUGBOAT GETS A PAINT JOB – $8.98

http://www.vaportekusa.com/tug-boats-sea-of-colors/#oid=1002_100
The tugboat is a solid, tried, and true rebuildable atomizer.  Now in super sexy new colors!
 
I have been a huge fan of the Tugboat RDA.  I’m also a huge fan of cheap prices.   This is a match made in heaven.   The Tugboat is a fantastic dual coil dripper that is built solid.  Out of all the three post drippers I own the Tugboat is my favorite.  Matching engraved and insulated drip tip included.  

THE HARD COPY:

  • 510 drip tip (with heat insulator)
  • 2 air holes
  • Deep juice well (approximately 4.5mm deep)
  • Tri-post design
  • Stainless steel posts
  • Copper 510 center pin
  • 22mm external diameter
  • Height without drip tip: 31mm
  • Laser engravings

WHERE: >> HERE <<