Monthly Archives: June 2015

SNEAK PEEK: EVOLV MAKES A 200 WATT BOARD – THE DNA200

Image kindly stolen from Phil Brusardo’s blog

Well all I can say is… It’s about fuckin time Brandon.

It seems Brandon from Evolv has finally made a chip that matches and even passes the very best China has to offer.  This will be Evolv’s first firmware upgradable and fully  customizable chip. I completely shit on the DNA40 because of its lack of punch and power. From what I can see – Evolv should be proud of this one.  Game changer – Big time.   

Let’s just hope its not plagued with any issues.

A quote from tasteyourjuice.com:


BRING THE PAIN: SIGELEI 150 WATT BOX MOD – $65.99 SHIPS FREE USA!

http://bit.ly/1MwBXzb

SWEET DEAL PEOPLE!

The latest box mod from industry leaders Sigelei produces huge, regulated power for less dollars.  The Sigelei is the box mod for you if you want to blow fat clouds, but it’s also for anyone looking for an ultra-reliable, stoutly-built mod with lots of features and adaptability.  Sigelei packaged the 150w with the high end SX330 chip, and with 2 30amp 18650 batteries installed this box mod will put out a monstrous 150 watts on builds as low as .1 ohms and as high as 3.0 ohms.  Great power requires great regulation, and the Sigelei has it in spades: A temperature sensor keeps your rig from overheating, and voltage, short circuit and battery protection is all included.

The Sigeli 150’s chassis features all aluminum construction and ships with a removable silicone sleeve for a sure grip.  The battery cover is magnetic, so switching out the 18650 batteries is a no-hardware cinch.  At lower wattages (as low as 10w) the 150w will vape for days on fully charged batteries, and when it’s time to recharge the advanced chip saves your voltage and wattage presets with the batteries removed.  A spring loaded 510 copper pin works with virtually all atomizers and the high visibility display keeps you informed on all settings and levels.


FEATURES:

  • Visual Operating System
  • Variable Wattage
  • Low Voltage Protection
  • Low Resistance Protection
  • High Voltage Warning
  • Short Circuit Protection
  • Reverse Polarity Protection
  • High Temperature Warning
  • Use Replaceable Battery


WHERE: >> HERE <<
USE COUPON CODE 150WATTDEAL TO BRING THE TOTAL TO $65.99
SHIPS FROM THE USA

PURE COPPER: THE NEMESIS MECHANICAL REPLICA – $9.87 – USA SHIPPED

nem·e·sis  ˈneməsis  noun
noun: nemesis; plural noun: nemeses
1.the inescapable agent of someone’s or something’s downfall. 

Available in other finishes like SS and White for the same price.

The Nemesis ( aka Adversary ) is a beautiful adjustable mechanical mod featuring silver plated contact posts and extension tubes. The Nemesis mod accommodates 18350, 18490, and 18650 sized batteries.

This Product Features:

  • Laser etched pattern
  • Fully mechanical mod
  • Stainless steel body
  • Adjustable 510 center pin (silver-plated brass)
  • Bottom lockable firing button
  • Air control ring
  • Recessed 510 connector
  • Compatible with most 510 atomizer and clearomizers
  • Can use with 18650, 18500, and 18350 batteries
  • Dimensions: 22mm diameter, 109mm length
  • Individual serial number


WHERE: >> HERE <<

USE COUPON YEAHBABY TO BRING THE TOTAL TO $9.87

ROLLOUT: PROJECT SUB-OHM CLT VERSION 3 RBA – $26.99

Worldwide release of the Project Sub-Ohm™ CLT V3 Mini RDA by Infinite is NOW LIVE!

The Project Sub-Ohm™ Edition CLT V3 Mini RDA Rebuildable Dripping by Infinite is the newest revision of the extremely popular CLT series, featuring a compact body design, upgraded materials, the signature triple slot airflow, and an incredible array of included accessories!


The Project Sub-Ohm™ Edition CLT V3 Mini by Infinite is the newest and shortest revision of the extremely popular CLT series! Featuring a shortened chamber and greatly reduced overall height, the CLT V3 Mini improves upon many of the features that made the CLT V3 a stand out RDA. At the center of the design is the triple stacked staggered airslot airflow, allowing the user to extremely fine tune their airflow and vape experience. The overall height from the base to the port measures 22mm, a far shorter distance than the original. The center post and deck milled negative post holes have been redesigned, featuring a cutaway design that allows for incredibly easy and flexible coil mounting. 11mm ultra bore drip sleeves come included in both black delrin and Pyrex, while a screw in adapter for 510 drip tips coupled with a black delrin flush ring allow for a huge array of styles and functionality changes, right out of the box. A PEEK honeycomb spit back and air dispersion disc is also included to radically change vape experience. Manufactured out of 304 Stainless Steel, the Project Sub-Ohm™ Edition CLT V3 Mini also features a PEEK insulator for high heat resistivity. Value, Functionality, and Style. The Project Sub-Ohm™ Edition CLT V3 Mini by Infinite.

Product Features:

  • Drastically shortened overall height compared to the original CLT V3
  • Triple Stacked Staggered Airslow Airflow
    • Each Measuring 6mm by 2mm
  • Completely Adjustable for Dual Airflow
  • Widened Post Hole Design
    • 3mm Center Post, 2mm Negative Post
  • Juice Well with Juice Channel
  • Black Delrin and Pyrex 11mm Ultrabore Drip Sleeves
  • 510 Drip Tip Adapter with Black Delrin Flush Ring
  • PEEK Honeycomb Insert
  • 22mm Diameter
  • 304 Stainless Steel
  • PEEK Insulator
  • Copper Contact
  • Iconic Project Sub-Ohm™ Engraving
  • Exclusive Serial Run

 

WHERE: >> HERE <<

USE COUPON CODE JOE10 TO BRING THE TOTAL TO $26.99
ALL ORDERS GET A FREE 10ML BOTTLE OF MILLENNIUM JUICE

 

PRICE DROP: THE SMOWELL DVP 50 – 50 WATT BOX MOD – $28.98 + FS

 


For that price? In the cart it went!

The Smowell DVP-50 packs a wallop, with a range of 6 to 50 watts available, and all in a package roughly the size of an iStick. The three button interface makes adjustments easy and it houses a single 18650 battery that can be replaced. (There’s still a little confusion about whether or not that battery is included– the description indicates not, but the shipping info indicates it is!…. we’ll keep you posted.) The 510 pin floats to ensure a great fit for your atomizer, and charging is via USB port. It can fire resistances ranging from 0.2 to 4.0 ohms. Another neat feature is the ability to run it in “mech mode” (not regulated). Over all, it’s a compact and economical high wattage option for when you’re on the go, or going places you don’t want to take more valuable devices.

THE HARD COPY:

  • Recessed 510 threading connection
  • Floating 510 center pin
  • Bottom micro-USB charging port
  • 0.66 inch OLED display screen show wattage, voltage, resistant and battery level
  • Variable wattage: Can be adjustable from 6.0W to 50W (in 0.1W increment)
  • Operating voltage: 3.7-4.2V
  • Matches atomizers with 0.2-4.0 Ohms resistance
  • High voltage warning (higher than 4.5V)
  • Low voltage warning (lower than 3.0V)
  • Atomizer resistance check
  • Over heat protection
  • Mech Mode and Wattage Mode switchable
  • House single 18650 battery (battery sold separately)

 

WHERE: >> HERE <<

USE COUPON CODE june15gb TO BRING THE TOTAL TO $29.98
IN STOCK – FREE SHIPPING

 

24 HOURS: VAPORJOES CANADA HITS 18,000,000

Vaporjoes Canada has ticked off another 1,000,000 hits.  In our grand tradition we take 24 hours off.  We will be back tomorrow at noon EST.    Please check out our Facebook group where deals are still being posted in real time. 

http://www.vapingunderground.com
http://www.vaporjoesonfacebook.com
http://www.vaporjoesontwitter.com
http://www.vaporjoesongoogle.com
http://www.vaporjoesapp.com
http://vaporjoes.tumblr.com

Look for advertising on the Vaporjoes Network? Click Here

 

 

USA BLOWOUT: THE SMOKTECH XPRO M65 BOX MOD – $35.99 FS!

 


The SMOK XPRO M65 Mod is the box mod you have been waiting for. It aims at more fabulous looks as well as much better performance. With the compact size, elaborate details, and powerful output, the M65 Mod is creating a new generation of devices that’s better by every measure.

The M65 Mod is made out of a high precision, aluminum and zinc alloy. The device is a light weight, compact, and easy to operate. The device has a concave surface for button protection. It has a new stylish anti-slip strip which also allows for more heat dissipation. It also has five air holes on the bottom of the device for increased safety.

The device is variable wattage from 6 – 65 watts and is able to power atomizers with a resistance load as low as 0.2ohm’s. The side of the mod has an extra large firing switch for comfortable operation, a LED screen, a plus and minus key, and a reset button. The base has a micro USB port for charging and a battery vent hole. The 510 connection on the top of the mod has an adjustable spring-loaded floating center pin.

Features and Specs:

    510 Threaded
    510 to eGo Adapter Included
    DC-DC flat signal, spring loaded brass pin
    Battery type: Single 18650 battery (not included)
    Voltage range: 3V – 12V
    Wattage range: 6W – 65W
    Minimum resistance: 0.2ohm
    Mech Mode and VW Mode Shift
    Shift between Mech Mode and VW Mode by entering the main menu
    Charges via micro USB for rapid recharging
    Short Circuit protection
    Discharge protection
    If system halts, can be restarted from side hole
    Vent Holes
    Intelligent OLED display screen displays: battery capacity, wattage, voltage, resistance
    Dimensions: 3-3/8″ x 7/8″ x 1-1/2″


WHERE: >> HERE <<

USE COUPON CODE iloveweekends TO BRING THE TOTAL TO $35.99
SHIPS FREE FROM THE USA

LOWEST: THE JOYETECH EVIC VT TC FULL KIT – $75.62


Dying to get your hands on the newest addition to Joyetech’s eVic family? We can’t blame you! There’s a lot of value packed into this kit, and especially at this great price! The eVic VT 60W offers a range of 1 to 60 watts, boasts a 5000 mAh capacity, and has two modes of operation: VT (variable temperature) mode that can fire from 0.05 to 1.0 ohms, or regular mode that can handle 0.15 to 3.5 ohms. How low can you go!? Currently available with a US plug in orange or black, or with an EU plug in orange, black or white. 

The eVic VT features:

  • Dimensions: 3-1/4″L x 1-7/8″W x 1″D (eVic-VT battery)
  • Built in 5000mAh battery
  • 510 threaded
  • Output mode: VT-Ti/VT-Ni/VW Mode
  • Temperature Range: 100-315 Celsius /200-600 Fahrenheit
  • Operating Wattage: 1 to 60 Watts
  • Output Voltage: 0.5V-8.0V
  • Resistance Range: 0.05-1.0ohm for VT mode
  • Resistance Range: 0.15-3.5ohm for VW mode
  • Charged via USB
  • 4ml Capacity

 

eGo ONE Mega VT-Ni (Nickel 200,made in USA)

  • Diameter: 0.25mm
  • Resistance: 0.2Ω
  • Wicking Material: Organic Cotton
  • Temperature recommended: 500-550˚F
  • Peak wattage: 60W

eGo ONE Mega VT-Ti (Titanium)

  • Diameter: 0.4mm
  • Resistance: 0.4Ω
  • Wicking Material: Organic Cotton
  • Temperature recommended: 450-500˚F
  • Peak wattage: 60W


WHERE: >> HERE <<

$75.62

 

ULTIMATE REBUILDERS KIT: THE COILMASTER STYLE KIT – $28.49


All re-builders can use a great rebuilding kit.   Here you have it at a great price!  These ship from the USA and come with everything you need in one nice package!

INCLUDED:

1 x Wire Cutter
1 x Needle Nose Pliers
1 x Ceramic Tweezers
1 x Tweezers
1 x Screwdriver
1 x Scissors
1 x Coil Jig with 3 heads
1 x Ohm tester
1 x Screw Kit

All in a very attractive case!


WHERE: >> HERE <<

USE COUPON CODE 5%downforyou TO BRING THE TOTAL TO $28.49
SHIPS FROM THE USA! 

UPDATE – INNOKIN IS BACK WITH THE COOLFIRE 4 – $34.19

UPDATE 6.11.15 – GOT MINE – THEY ROCK!!
STUNNING MOD FOR THE PRICE!

The Coolfire IV by Innokin Technology is the latest iteration of the popular Coolfire Series. Innokin’s Coolfire IV was designed with ergonomics in mind as they have designed a visually appealing device that fits perfect in the hand without compromising quality and functionality. The construction of the Coolfire IV is one built to last, with a heavy duty aluminum construction that feels sturdy, but without the extra weight, making it a very portable and comfortable to hold. Innokin did not hold back with the internals, offering a wide range of features in the affordable Coolfire IV. The Coolfire IV offers variable voltage and variable wattage with limits of 7.5v and 40W respectively. The battery on the Coolfire IV is a 2000mAh battery with all-day vape potential. Lowest atomizer resistance possible on the Coolfire IV is 0.3 ohms making it versatile for today’s wide offerings of sub-ohm tanks. The Coolfire IV also comes in a range of colors such as silver, black, red, blue, purple and pink for style and personality. The Coolfire IV by Innokin.

Product Features:

  • Variable Voltage 3.0 – 7.5 volts adjustable by .1v increments
  • Variable Wattage 6.0 – 40.0 watts adjustable by .5W increments
  • 2000mAh battery
  • Standby current of 100uA max
  • Maximum output current of 12A
  • Resistance limit of 0.3 ohms
  • On/Off switch for convenience
  • Micro USB DC 5V/1A charging
  • Low voltage warning
  • Short circuit/Atomizer protection
  • Over-discharge protection
  • “Vape while Charging” technology
  • Voltage or wattage setting memory
  • Overheat Protection
  • Convenient lanyard hole
WHERE: >> HERE <<

USE COUPON CODE JOE10 TO BRING THE TOTAL TO $34.19
ALL ORDERS GET A FREE 10ML BOTTLE OF MILLENNIUM JUICE

FLASH SALE – SQUONKER RDA – THE CHALICE III STYLE – $9.26


Bottom feeders are finally making a come back and the Chalice III style atomizer is one of the best RDA’s for them.  This version can also be used as a normal dripper.  It’s cheap and on a flash sale – only 1 1/2 days left on the sale!

The base contains:

  • 510 connection
  • Removable feeding bar plated with silver ( if some how the juice floods the interior of the base a 2mm hex key can be used to remove the feeding pipe and allow the base to be washed an cleaned’
  • The + and – posts are now different from the previous versions, are threaded and also on top of them the nuts are the ones that will fix the wire.
  • Same curved surface under the posts ( for the excess juice to go back into the feeding bottle)- the wick and coil will not be placed like before between the post, now the coil will be facing  the air hole and you can play with its position the way you like for more vapor, more flavor, TH, etc.

The middle cap:

  • is the cap which screws on top of the base
  • it is engraved with the “Chalice III” logo
  • on its upper part has 3 air holes
  • on the lower inside part of it has the 2mm hole that will provide the air for the coil

The top cap is made from 2 parts:

  • the polished ring wich will allow to adjust the air flow
  • the adapter for the drip tip

The drip tip

  • OD: 9 mm
  • made from to parts polished ( the upper part  ) and satin
  • it holds two o rings

WHERE: >> HERE <<

$9.26

TWO LG HE2 18650 BATTERIES – 20A – 2500MAH – $11.50 + FREE SHIPPING!

http://bit.ly/1OR4mVW


SHIPS FROM THE USA!

AT JUST $5.75 A BATTERY AND FREE SHIPPING? A STEAL!

These are monster batteries. These 18650s have a 20/35-amp continuous discharging rate, which is perfect for sub-ohm builds. With a mAh rating of 2500mAh, these will outlast and outperform any other battery on the market. 

These are the batteries Vaporshark uses for their rDNA40 mods.

  • Typical capacity: 2500 mAh
  • Nominal voltage: 3.6V
  • Cut off voltage: 2.5V
  • Continuous maximum charge current: 4A
  • Continuous maximum discharge current: 20A
  • Pulse discharge current: 35A


WHERE: >> HERE <<

$11.50 + FREE SHIPPING

ROLLOUT / PROJECT SUB-OHM: ATTY CUBED RDA BY WOTOFO – $31.49

The Project Sub-Ohm™ Edition Atty Cubed RDA by Wotofo is the essential box mod specific RDA, combining a very strong feature set, high quality machining, and a box mod centric form factor. The Atty Cubed features a split positive center post and deck-milled negatives, with each post hole measuring 2mm in diameter. Coupled with a 6mm deep juice well, the Atty Cubed can accommodate a wide variety of build configurations. Airflow is designed as dual staggered airslots, each measuring 7mm by 2mm, allowing absolutely tremendous airflow. Paired with the specifically designed top cap that allows for the opening and closing of each airslot, airflow can be throttled up and down for any particular preference. A Wotofo Threaded Broadcap features a delrin competition ultra bore of 11mm, with a traditional 510 adapter included to allow for traditional drip tips. Manufactured out of the 304 Stainless Steel, the Atty Cubed also features German made PEEK insulators, maximizing heat resistance to withstand the most strenuous builds. The perfect pairing with your box mod. The Project Sub-Ohm™ Edition Atty Cubed by Wotofo.

Product Features:

  • Unique Box Mod Centric Design and Form Factor
  • Split Center Post with 2mm Post Holes
  • Deckmilled Negative Posts with 2mm Post Holes
  • 6mm Deep Juice Well
  • Dual Staggered Airslot Airflow
    • 7mm by 2mm
  • Stagger Cut Airflow Adjustable Top Cap
  • 11mm Ultrabore Broadcap
  • 510 Adapter
  • German Made PEEK Insulator
  • 304 Stainless Steel
  • Silver Plated Contact
WHERE: >> HERE <<

USE COUPON CODE JOE10 TO BRING THE TOTAL TO $31.49
ALL ORDERS GET A FREE 10ML BOTTLE OF MILLENNIUM JUICE

BLOWOUT: THE 5ML ATLANTIS UPGRADE TANK – $2.46

http://bit.ly/1GxTPuY
 


Here is a great deal on the 5ml upgrade for your Aspire Atlantis tank.   This particular upgrade tank is made by Aspire and comes with the whole upper portion of the unit.   This will effectively double your juice capacity for just $2.46.   I have an upgrade tank for my aspire and wonder how I ever vaped an Atlantis without it.

Product Features:

  • Approx 5ml Juice Capacity glass tank
  • 22mm in Diameter so your Atlantis Tank will fit flush with most of your mods
  • All Stainless Steel and Glass Construction
  • A must have for all Atlantis Tank Users


WHERE: >> HERE <<

USE COUPON CODE YEAHBABY TO BRING THE TOTAL TO $2.46

THE SUPER TANK – TRULY SUPER @ $29.99 – ALSO BUY 2 GET 1 FREE JUICE!

 


The Supertank is the next incarnation of the very popular sub-ohm style of tanks.  This time its coming from Tobeco and the reviews are pretty great!   Even Nitrobex, a host on Mod Envy, loves them.  An avid re-builder has fallen in love with a sub-ohm tank!

These are in stock – not a preorder!




THE HARD COPY:

Made from Aluminum and Stainless steel
Easy Top Refill System
Airflow Control System
Delrin and Stainless Steel Drip Tip
Pyrex Glass Tank
4ml eJuice Capacity
Replaceable coils available in 0.2ohm or 0.5ohm


WHERE: >> HERE <<

ALSO CHECK OUT THEIR BUY 2 GET 1 FREE JUICE DEAL!