TRIQUETRA STYLE MECHANICAL 18650 / 26650 – $29.21

http://goo.gl/f62YjP
This unique mod can use both 18650 and 26650 batteries.
The inner tube allows for the 18650 and if you remove it – you can use a 26650.

THE HARD COPY:

  • Recessed 510 connection
  • Adjustable copper positive contact
  • Solid brass negative contact
  • Copper 26650 body diameter: 29mm
  • Brass 18650 body diameter: 22mm
  • Brass top cap and bottom cap
  • Bottom spring-loaded firing button w/ reverse-threaded copper locking ring
  • Adjustable delrin firing pin insulator
  • Engraved logo
WHERE: >> HERE <<

$29.21

ROLLOUT: THE FATBABY 100 WATT MOD BY PROJECT SUB-OHM – $99

http://www.vapordna.com/ProductDetails.asp?ProductCode=FB0001&Click=98


“fatbaby” By Project Sub-Ohm™

Even since the introduction of the “littlemaN’™ Box mod, the “littlemaN”™ has gain a huge popularity among the world of vapers! Now Project Sub-Ohm™ has found a perfect platform to build on its third box mod. The “fatbaby”™ 100 Watts Mod made by Project Sub-Ohm. The goal is simple, to create an affordable yet still super powerful device that can satisfy majority of the vapers out there!

Product Includes:

  • 1 x “fatbaby”™ Mod by Project Sub-Ohm™
  • 1 x screwdriver
  • 4 x copper center pins
  • 4 x stainless steel screws for back battery door
  • 1 x instruction manuel
  • 1 x signature “fatbaby” Mod gift box with Project Sub-Ohm™ and ‘fatbaby”™ logo


Product Descriptions:

The “fatbaby”™ series by Project Sub-Ohm™ is a powerful Variable Wattage Device that can adjustable it’s power from 10W to 100W in increments of 0.1 Watts! This device uses upgrade YiHi SX330 Chip, which is capable of firing coils at 0.15 ohm up to 3.0 ohm. The “fatbaby”™ Mod is powered by a dual IMR 18650 battery and is capable of producing up to 100 Watts of power! The two screws on the back of the device hold the battery cover firm and sturdy, additional two magnets are in installed as well to hold the back battery cover without the use of the screws for ease of swapping batteries. The battery is removable, so changing batteries are a breathe to do. The OLED screen is bright and easy to read, and also shows you the wattage, resistance, output voltage and battery life.

Product Features:

  • Beauty screen and greeted with “fatbaby”™ when turned on
  • Full Aluminum Body For rigidity!
  • Capable of firing 0.2 ohm – 3.0 ohm build
  • Capable of putting out 100 Watts of power!
  • Beautifully Engraved With Project Sub-Ohm™ Logo and “fatbaby”™ logo
  • Serialized (Roman Numeral Serialization, I, II, III and so on)
  • Roman Numeral Serialization is an extremely labor intensive work, each number is manually adjustable with live people!
  • Matches all other Project Sub-Ohm™ products
  • We Made It Powerful! We Made it Affordable!
  • Unique and Elegant “fatbaby”™ gift box packaging. (Highly Sought After!)

Product Specs:

  • Output Power: 10W – 100W
  • Output Voltage: 1.5V – 7.0V
  • Loading Resistance: 0.15 ohm – 3.0 ohm
  • Output Short Circuit Protection
  • Reverse Battery Protection
  • Dimension: 102mm x 56mm x 23mm (2-3/16″ x 4″ x 7/8″)

Product Recommendations:

  • FOR USE WITH 30 AMPS OR HIGHER IMR BATTERIES ONLY!
  • Please do not put in your battery in wrong direction
  • Make sure battery sit completely snug in the battery slot
  • Do not use any batteries if the outside wrapper has come off!
  • Turn off the device before pulling your battery out
  • Do not wrap your coils below recommanded ohm level and always vape safe!
  • 510 pins are reverse threaded, do not force it pin does not turn
  • Alway turn off the device and take the batteries out when not in use!
  • Center pin is reverse threaded, do not force turning! (Screw right for pin to up, screw left for pin to go down)
WHERE: >> HERE <<

$99

REPLICATED: THE LITTLE BOY RDA – $10.19

http://myurl.co/littleboyrda
Seems the evil clone empire has been working over time.    Cranking out new replicas faster and faster.  I’m hearing this particular one is pretty bad ass and very close to the original.

THE HARD COPY:

  • Compatible with 510 drip tip (drip tip sold separately)
  • The POM top cap lid is removable
  • The lid also works as a heat insulator of the drip tip
  • 510 threading connector, adjustable copper 510 center pin
  • Tri-post design for single/dual coil build
  • Posts material: Stainless steel
  • Air flow adjustable, 3 air slits on the sleeve
  • Engraved logo
  • 22mm diameter
  • Comes with a POM top cap lid + drip tip 2-in-1 combo
WHERE: >> HERE <<
$10.19

USA DEAL: CERAMIC TWEEZERS – $10.99

NOW AT A NEW LOWER PRICE FROM THE USA!

The photo above is what inspired me to start looking into these.  You see what they are doing?  Making a micro coil right deck of the rebuildable – by firing the PV.  Since the tweezers are heat resistant (ceramic) it gives the user a whole new way to rebuild with ease.

If you rebuild – you need these.

WHERE: >> HERE <<

$10.99

THE $13.00 COLONIAL REPLICA

http://goo.gl/zjwBRb
Inspired by the ‘Colonial’, this replica is constructed of aluminum with an army green colored finish. Contacts are copper and positive pin is adjustable. Mod houses a single 18650 battery. The recessed bottom-firing switch is sets this mod apart.

THE HARD COPY:

  • 510 threading connection
  • Copper contacts (adjustable)
  • Recessed curved firing button to prevent accidental firing
  • With logo engravings
  • Houses single 18650 battery (battery sold separately)
WHERE: >> HERE <<
$13.93

TWO SAMSUNG INR 18650 25R BATTERIES – $16.94 + FS

http://bit.ly/1wqKPjP
With Sony officially ending its production of all 30 amp 18650s – the Samsung 25R has started taking its place.  They are plentiful, cheap, and reliable!    This deal your getting two + a plastic carry case for this low price!

This deal is hard to beat out of the USA with free shipping.

– Type: Lithium-ion
– Composition: LiMn Hybrid (IMR)
– Rechargeable: Yes
– Top style: Flat top
– Capacity: 2500mAh
– Max continuous discharge: 20A
– Nominal voltage: 3.7V
– Full charge voltage: 4.20V±0.05V

WHERE: >> HERE <<

$16.94 + FREE SHIPPING

(UPDATE) THE 180 WATT GOD MOD HITS FASTTECH FOR $98.00

http://myurl.co/gm2

This is why the DNA40 is too little … to late!

You wont find it cheaper ANYWHERE else.

Now we found a very cheap source to actually get one.  This wattage behemoth uses 3 x 18650 batteries and hits a maximum output of a whopping 180 watts!

We thought $1.00 per watt was cheap, now we are looking at about 50 cents per watt.

THE HARD COPY:

  • Capacity  Use 3 18650 batteries
    Input voltage 9.9v-12.6v
    Output voltage 1v-12.6v
    Size 119x69x30(mm)
    Color Red,blue,silver,orange,black
    Resistance 0.5-4ohms
    Wattage(PMW) 5-180w
    Material Aluminum
    Big currents protection Yes
    short circuit protection Yes
    Reverse battery protection Yes
    Low voltage protection Yes
    Low resistance protection Yes
    Temperature protection  Yes
WHERE: >> HERE <<

$98.48

REPLICATED: THE ZERO FALLS VICTIM TO THE EVIL CLONE EMPIRE

WHERE: >> HERE <<

TUGBOAT VERISON 2 REPLICA LANDS AT $8.96

http://goo.gl/uB8ihl
The Tugboat Styles are widely regarded as a great, simple, no nonsense atomizer. The version 2 brings a cleverly designed top cap with two parts to allow you to easily adjust your airflow without the need to grab a drill. Wide bore drip tip is included. Constructed of stainless steel.

THE HARD COPY:

  • Stainless steel 510 drip tip
  • 4 air holes or 2 air holes option
  • Deep juice well (approximately 3.6mm deep)
  • Tri-post design
  • Posts material: Chromed brass
  • 510 connection (chromed brass center pin)
  • 22mm external diameter
  • Height without drip tip: 29.5mm
WHERE: >> HERE <<

$8.96

CHEAP AND EFFECTIVE: THE $5.99 RDA SHIPPED FROM THE USA

Basic, cheap, and effective!

The Dripper RDA is exactly what you think it is: a rebuildable dripper. This is a very basic design, perfect for someone who wants to get into rebuilding. There’s a 1 positive and 1 ground post, ideal for single-coil builds. Airflow has been improved over past RDAs, in that the airflow comes in from a hole in the side, instead of at the bottom of the deck. This also means reduced leaking. The top cap also features an integrated mouthpiece for a uniform look. The Dripper comes with a pre-made coil.

For $5.99 is a great little dripper!

WHERE: >> HERE << 

$5.99

BLOWOUT: VAPORSHARK DNA 30 DROPS TO $119.00 + DNA40 PREORDER

Everyone knows what a HUGE fan I am of the Vaporshark.   To me the chip is secondary – its more build quality and support.  With the unveiling of the new DNA40 the DNA30 original size version has dropped to just $119.99 (50 bucks off).

A STEAL in this bloggers opinion.

They are also opening pre-orders on the new Vaporshark running the DNA40.

$119.00 DNA30 VERSION:  >> HERE <<

PRE-ORDER THE rDNA40:  >> HERE <<

THE IGO-W PLUS IN COLORS + FREE DRILLING SERVICE + FREE JUICE – $13.49

UD IGO-W Plus RDA Rebuildable Atomizer is similar to the original IGO-W RDA Rebuildable Atomizer favorite but with a 22mm diameter, larger airholes and now available in a variety of colors!

This vendors offers free air hole drilling services and every order gets a free 10ml bottle of juice!

THE HARD COPY:

  • Large airflow holes (2mm)
  • Made of 304 Stainless steel
  • Available in different colors
  • Standard 510 connector
  • Dual Coil capable
  • 22 mm diameter
  • 25.4 mm height including the 510 connector
  • Hole for 510 drip tip
WHERE: >> HERE <<

USE COUPON CODE JOE10 TO BRING THE TOTAL TO $13.49
FREE DRILLING SERVICE – FREE 10ML BOTTLE OF JUICE 

STILL GOING: ASPIRE NAUTILUS MINI + 4 HEADS – $22.99

Deal includes 2 extra heads – so you will get 4 total.

One of the best replaceable head tanks I have used.  Far better then the original Nautilus tank in my opinion.    I use mine on an eleaf iStick – a fantastic little setup!   The mini itself isn’t a tiny tank – its about the same size as a normal Aerotank.

THE HARD COPY:

The Aspire Nautilus Mini is the next big thing in the vaping world. This tank system uses a new type of coil technology that ensures proper saturation to the wicking material.. The Nautilus Mini uses a BVC (bottom vertical coil) that allows for much greater vapor production and extremely enhanced flavor. This bottom vertical coil unit is comparable to a stone age cartomizer in a sense that there is no wicking material that goes directly through the coil. The vertical coil is surrounded by wicking material on the outside, thus allowing airflow to be pulled straight through the center of the coil. Though this tank system does not use a dual coil, the vapor production from it tops any dual coil glassomizer that is currently on the market. Another huge advantage to this new coil technology is that the lifespan of the coil is much more exceptional than its predecessors. These new bottom vertical coils are also backwards compatible with the original dual coil units for the Aspire Nautilus, meaning that the old styled coil units will work properly in the Nautilus Mini and the new styled coil units will work properly in the original Aspire Nautilus. Adjustable airflow is almost a must in the vaping world today, and the Aspire Nautilus Mini offers a uniquely redesigned style of airflow control where pre-drilled air holes rotate on a ring that clicks into place for the user’s desired setting. The Nautilus Mini is constructed entirely of Stainless steel, with a pyrex tank section. Each part of the tank system can be disassembled for cleaning purposes also. All in all, the Aspire Nautilus Mini is a tank system that is a thing of pure beauty to witness.

What’s in the box:

  • Fully rebuildable Aspire Nautilus tank
  • eGo beauty ring
  • (1) 1.6 ohm dual coil atomizer head (attached in tank)
  • (1) 1.8 ohm dual coil atomizer head
  • (2) Extra replacement heads
  • Instruction manual
WHERE:  >> HERE <<

REPLICATED: THE DARK HORSE RDA – $13.45

http://goo.gl/mi31vk
A BEAST of a RDA!   Now replicated at a FANTASTIC PRICE!

Thick heavy posts, monster airflow, and large wide bore delrin drip tip.

THE HARD COPY:

  • Removable 510 drip tip
  • The POM top cap lid is removable for easy access to the deck without removing the top cap
  • The lid also works as a heat insulator
  • 510 threading connector, adjustable copper 510 center pin
  • Tri-post design for single/dual coil build
  • 6 air control holes on the sleeve
  • Laser engravings logo
  • 22mm diameter
  • Height without drip tip: 34mm
  • Comes with a POM 2-in-1 top cap lid + drip tip combo
WHERE: >> HERE <<
$13.45

DIFFERENT: WIDE BORE DRIP TIPS WITH AIRFLOW CONTROL

Constructed of stainless steel with double o-rings for added stability, these wide-bore drip tips boast a special feature. The brightly colored aluminum band rotates to allow you a little extra airflow. Why? Well, we hear rumors that the biggest cloudchasers “sidestream” or pull in a little fresh air alongside their vapes. We haven’t had a chance to test it, so let us know how it works for you! They are also nice for folks who just want to cool or thin down their vape a little. Available in 11 colors for $2.33 each, or if you just can’t decide grab the 11-pack for just $20.01.

Colors can picked from the drop down menu.

WHERE: >> HERE <<