BLOWOUT: CHI-YOU MEGAN 26650 MECHANICAL – $9.99 (USA SHIPPED)

Here is a GREAT deal on the 26650 Chi-You Megan.  These are $30-$50.00 everywhere.  
Even with shipping these come in under $19.00

The Chi You Megan Clone by Tobeco is a beautiful, hard-hitting 26650 mechanical mod. Designed with a two-toned finish of stainless steel and brass, this mod comes with 2 top caps. One slanted for your 22mm atomizers, and one flat for your 30mm atomizers. Tobeco manufactured a 1:1 clone of this great mod!

THE HARD COPY:

  • 26650 battery tube.
  • 510 threaded.
  • 316 Stainless Steel.
  • Stainless and Brass mix.
  • Includes 2 styles of adjustable top caps.
  • Brass contact pins.
  • Bottom firing switch.
  • Locking ring for safety.
  • High quality engraving.

WHERE: >> HERE <<

$9.99

REGULATED: THE SX300 35 WATT VAMO – $44.86

http://myurl.co/amosx350
I was very excited when the 30 watt version of the Vamo came out, but it turned out to be a TERRIBLE device.  The chip-set was a complete joke.  Now there is a new Vamo style mod with a chip set that is very reliable and well known to us all – The YiHi SX300.  Coming too you at a great price!  The lowest priced 35 watt device on the market.

There is also a SX220 (20 Watt) version of this device at a lower price via the drop down menu.


THE HARD COPY:

  • Standard work voltage: 3.2-4.2V
  • Standard load: 2.5 ohm, at 0.5 ohm also work
  • Static current: 4.2V/<300uA
  • Smoking current: 2.5 ohm, allow max work current 6.7A
  • Full strength battery: 3 ohm, max output voltage 7.75V
  • Constant wattage output: +/-0.5W
  • When resistance at 1.5 ohm, max output voltage >5.47V
  • Variable wattage: 7-35W, 0.1W each time
  • Lowest resistance: 0.5 ohm
  • Removable beauty ring
  • 510/eGo threaded connection
  • Brass contacts
  • Press quickly 5 times to turn on/off
  • Houses single 18350/18650 battery (batteries sold separately)
  • Display wattage, voltage, resistance and battery strength or puffs time
  • When the device too hot, the screen will display “too hot”, shut off ouput automatically
  • Low battery voltage (<3.2V) warning, to protect the battery efficiency
  • W/ output short protection and low resistance protection, make the device w/ high efficiency
  • Can test the atomizer real resistance, w/ tolerance +/- 0.1 ohm

WHERE: >> HERE <<

$44.86

BACK IN STOCK: THE FUHATTAN IN COPPER – $34.99

http://bit.ly/1p0NbUJ

The story behind this mod is HILARIOUS.  They have been selling out everywhere.  
Today I found them at a pretty good price with free shipping from the USA.

Standard Features:

The Manhattan measures almost 1in in diameter; standing 3 ¼ in tall
Thick wall design to add to the durability and electrical conductivity of the Mod
A powerful “rare-earth” magnet button design with a built in fail safe to ensure this Mod cannot fail “On”.

This is only for mod device which includes one body, one top cap, and one bottom button.

Specs

  • Copper Body
  • Copper Top and Bottom Cap
  • Copper Firing Button
  • Copper Contacts
  • Derlin Isolator


WHERE: >> HERE <<

$34.99

WHATS YOUR SIGN: ZODIAC DRIP TIPS – $2.74 EACH

What’s your sign? Show it off on your vape setup. These wide bore drip tips are constructed of stainless steel with a brass band for accent. The 12 signs of the Western Zodiac are laser etched on the tips. 

WHERE: >> HERE <<

$2.74

18650 VERSION: ZNA REPLICA GETS A PAINT JOB AND 36 WATTS – $61.46

http://goo.gl/wKw1Ti
I’m totally going to rock that green version!

I have the ZNA replica already and I’m hard pressed to see a difference.  Its kinda spooky!   There are some big differences with this version.

1.  Its a native 18650 battery tube
2.  This version goes to 36 watts
3.  Awesome new colors!

Zgripper 36:
 
1. 5w-36w
2. short circuit protection
3. stainless tube + aluminum body + copper pin
4. imr 18650 battery
5. 0.3-3ohm

WHERE: >> HERE <<

USE COUPON CODE 5OFF TO BRING THE TOTAL TO $61.46

THE KIT: THE REBUILDABLE ATOMIZER TOOL SET – $39.99 FS

Everything you need for rebuilding in one neat package.  Love it!

510 Atomizer Ohm Meter 

  • 3 digit display shows Ohm reading.
  • 510 and EGO threaded connection.
  • Requires 2 AA Batteries 

Coil Wrapping Jig  

  • Includes 5 different sized rods: 1mm, 1.6mm, 2.4mm, 3.2mm, 3.5mm
    Made of Aluminum with plastic easy-access thumb screws.
  • Hidden compartment with rubber stopper for storing rods.

Atomizer Screwdriver 

  • This bad boy includes 4 different size Phillips heads and 4 different flat heads.
  • Solves the problem of having to keep more than one screwdriver for your different atomizers.
  • Heads are stored right inside the screwdriver! Just unscrew the top.

Curved Angle Pointed Tip Tweezers

Straight Pointed Tip Tweezers

Scissor Cutters 

  • For cutting wicks

Cutting Pliers 

  • For cutting Kanthal and Ni-chrome Wire

 Needle Nose Pliers with serrated jaws

Everything comes neatly packed in leather style case.  
Also included is organic cotton and some Kanthal wire to start you off.
Ships from the USA – Shipping is free.

WHERE: >> HERE <<

$39.99

PROTECTED: SILICONE CASES FOR 18650 BATTERIES – 68 cents EACH

http://myurl.co/batterycases
It’s one of those tiny little things that can make a HUGE difference. Battery boxes can be bulky in the pocket or purse, and we all know carrying batteries without the protection of a case can be very dangerous. Keys, pocket change and other metal items can shift, and the next thing you know you have a battery going thermal in your pocket.

Well, here’s a brilliant and CHEAP solution. Available separately for $1.13 or in a 4-pack for $2.67 (thats only 68¢ each!), these silicone sleeves stretch so you can slip in a single 18650 battery in a very compact, convenient and most importantly SAFE way to carry with you. If you use 18650s you need these.

WHERE: >> HERE <<

68 cents ea in a pack of 4

THE MUTATION X – THE REBUILDABLE ATOMIZER BY INDULGENCE – $24.99

http://bit.ly/1kVNlLW

Want Originality? Airflow? Deep Juice Well? Affordability? Meet Mutation X! This RDA has 9 airflow holes on each side and it’s adjustable! Blowing gigantic cloud has never been easier!

Designed In USA

The Mutation X RDA is an all US Designed RDA, features 18 air holes in a diagonal pattern to induce swirling, and its adjustable airflow control allows you to blow clouds or just for flavor chasing.

Product Features:

  • Made out of Stainless Steel Construction
  • SS center post with SS screws
  • 18 air holes in total to have more than sufficient air travel through your coils
  • Adjustable Air-flows cyclops style
  • Deep Juice Well
  • Huge Post Holes
  • Top Heat Sink to disburse heat more quickly
  • Negative Posts are milled to the deck for max conductivity and rigidity
  • Comes with a matching drip tip
  • 22mm in diameter
  • clean no logo form factor around the body of the RDA
  • Great for doing dual coil builds
  • Original & Affordable
  • Designed In USA

WHERE: >> HERE <<

$24.99 + FREE SHIPPING

THE $14.99 GP PAPS STYLE MECHANICAL SHIPPED FROM THE USA!

http://101vape.com/mechanical-mods/398-gp-paps-mechanical-mod-clone.html#oid=1003_258
Here is a stunning deal on the GP Paps style mechanical.  

Shipped from the USA at just $14.99 ea.

Solid and elegant.  These are so cheap I picked up 10 for giveaways.


THE HARD COPY:

  • Brass with silver plated contacts
  • Adjustable positive contact
  • Bottom spring loaded firing switch
  • Reverse locking ring
  • 4 battery vent holes
  • Top cap with air-channels cut
  • 22mm diameter
  • Laser engraved logo and serial number
  • Houses single 18350 battery (battery sold separately)

 

WHERE: >> HERE <<
$14.99

ROLLOUT: KANGER GENITANK MEGA – $16.49

http://myurl.co/kangergenni

Much like the original Aerotank Mega – these have the new airflow system that was brought out on the Aerotank Giant.   I find this airflow system a lot better.   These use the same exact heads as the aerotanks – so there is nothing extra to buy.  These sold 3.5ml of juice and comes with two replacement heads.   The tank is made of pyrex glass.

Features:

  • Improved design
  • New Airflow Control Valve
  • Upgraded Dual Coil: available in 1.2Ω / 1.8Ω Currently Kanger supplies two 1.8ohm dual coils
  • This is subject to change as Kanger is known to change the coils ohms packed in the boxes.
  • Pyrex Glass tube
  • Capacity: 3.8ml
  • 510 Threaded (May need a 510 to ego adapter for Mods)
  • Replaceable Atomizer Heads
  • Bottom Coil
  • Glue Free
  • 75mm Height
  • 22mm Diameter

WHERE: >> HERE <<

$16.49

CHEAPER THAN FASTTECH – CLOUPOR T5 – 50 WATT TUBE MOD – $77.94

http://myurl.co/cloupert5
http://myurl.co/cloupert5
I had the opportunity to check this mod out at Vapemania.  I was VERY impressed by it.  
Its so much nicer in person.  

I bought one from the vendor.

The makers of the VERY popular 30 watt aluminum box mod has come out with a new 50 watt tube mod.  This is the only 50 watt tube mod I’m aware of.  These us a single 18650 and recharge via a micro USB port.  The mod is made of a 6061 aluminum.

THE HARD COPY:

  • 510 threaded connector
  • Variable Wattage from 7W-50W in .1 watt increment
  • Body is made of anodized aluminum
  • OLED display shows battery percentage, watts, ohms, puffs, battery charging state, volts and CPU temperature
  • Powered by single 18650 battery (battery sold separately)
  • Micro-USB charging port
  • Compatible with 0.2ohm~3.6ohm atomizers
  • Input voltage/current: 3.2-4.3V/1.5-7A
  • Output voltage/current: 2-9.3V/10A
  • Battery compartment diameter: 18.7mm
  • 5 times click to turn on/off

WHERE: >> HERE <<

$77.94 + FREE SHIPPING

FOUND: THE EXTREMELY RARE SONY 50 AMP 26650 BATTERIES

http://bit.ly/1pF5HCB



FOUND!


These batteries are almost impossible to find.   I found a merchant that enough stock to put on this site.  The price is a bit on the expensive side, but thats supply and demand.  For those looking for the BEST 26650 battery going – now is your chance to get in on the deal.

Price comes with free shipping.   

THE HARD COPY: 

  • Li-ion 2600mAh 26650 cell  
  • Product Name :  SONY SE US26650VT  T C11 Lithium-ion Rechargeable Battery 
  • Model : 26650 ·  Nominal Capacity : 2600mAh
  • Diameter : 26.0mm 
  • Height : 65.0mm 
  • Weight(Typical) : 2.7 oz / 85g  
  • Charge Method: Constant Current and Constant Voltage(4.2V) 
  • Nominal Voltage : 3.7 V 
  • Max. Continuing Discharge Current : 50A
  • Internal Resistance : 16mOmh
  • Discharge Temperature : -20°C ~ +60°C

 

WHERE: >> HERE <<

LOWER: THE CLOUPER 150 WATT (UPGRADEABLE TO 200) BOX MOD $99

 


Now in new colors!

The new 150 watt box mod by Clouper is now up for sale.   China is pushing the limits on wattage and is coming out swinging with this new mod.   This mod uses two 18650 batteries.  The form of this box mod reminds me a lot of the IPV2/3.

The price is killer! You wont see it this low for very long.

THE HARD COPY:

  • Magnetic back cover
  • Upgradeable firmware(can be upgraded to 200w)
  • With Variable Voltage
  • Output power: 7W-150W
  • Output voltage : 5.6V—14V
  • 0.2-4.0ohm atomizer resistance
  • Reverse battery protection,adjustable center pin
  • With CPU temperature control system
  • Color: Black,blue,red and silver
  • Size:99*55*25mm

WHERE: >> HERE <<

$99

THE CASTLE SYLE COPPER MECHANICAL KIT – $24.12

http://myurl.co/castlemechanical

I love the castle mechanical mod.   It reminds me of mods like the Stingray X and Polidac because they have “pants”.  You can slip the SS tube over the copper inner tube to give the signature look.  The top cap of the Castle is beefy with that classic castle tower look.  The kit comes with all 3 tubes and 3 pants for all battery sizes.  The case it comes in is pretty bad ass too – a steal at just $24.00.

THE HARD COPY:

  • Copper top cap + battery tube + locking ring
  • Stainless steel sleeve + bottom cap
  • 510 connection
  • Chromed brass contacts
  • Positive contact is adjustable
  • Bottom spring-loaded firing button, with reverse-threaded locking ring
  • 6 air holes on the bottom cap
  • 18650 +18500 + 18350 full set tubes
  • With logo engravings on each tube
  • Tube internal diameter: 18.7mm
  • Tube external diameter: 22mm
WHERE: >> HERE <<
$24.12

FOR THE LAZY – 50 PACK PRE-BUILT SUB-OHM COILS – $3.60

http://myurl.co/cotton
So if you lazy like me – you hate building coils.

Today you can get 50 coils built at .35 for jut $3.60.   These come with cotton wicks.  What type of cotton is unknown so I’d advise against using the wicking material.  The cotton is a good way to separate your coils if you have them all mashed together, but before you vape – replace this wicking material with something you more familiar with.

WHERE: >> HERE <<

$3.60 for 50