GIVING IT AWAY: THE $14.00 STAINLESS STEEL KAYFUN LITE REPLICA

Kayfun Lite Replica

We all know them, we all love them.  Now you can get one under $15.00.  I could understand a chrome plated brass version, but stainless steel?  A crazy bargain!    If you were thinking about trying them or wanted a few extra — Stock up!

THE HARD COPY:

  • Standard 510 drip tip
  • Polycarbonate(PC) tank section
  • Chromed brass 510 contact pin
  • Bottom screw fill-hole 
  • 22mm diameter
  • Pre-assembled coils

WHERE:  >>> HERE <<<

$14.39

DOMINATE: THIS MAKES ALL OTHER CHIPS LOOK LIKE AN EGO ( 100 WATTS )

We have been talking about the wattage boards for a while now.   The people over at grand innovations have been quietly making a Trojan horse.  This chip-set is capable of over 100 watts and has a display system that makes all others look like something from the stone age.   It is absolutely  incredible what this chip / mod is capable of.     We first brought them out on the blog / Mod Envy when they had the 40 watt version – Now the upgraded version is pretty exciting stuff!   Check out their page and see what kind of mod magic is going on over there.  This will rock the community when its mass produced and I’m 150% behind it.

SPECS:


Variable voltage
Variable wattage
80-100 watts
max output 20 amps
max Real-time OHMS checker
Real-time current meter
Real-time Volt meter
Battery level meter S
Sub Ohms capability
Security Lock
Customized Serial number
Thermal Sensor On / Off switch
TFT Display

Micro SD ready
Wallpaper / Screensaver features
Bare / Anodized Aluminum Enclosure
Accepts 2×18650 battery

They are looking to produce 100 units this month.

The case is a bit rough but the chip-set is what I’m interested in.

WHERE: >>> HERE <<<

TURN YOUR OLD PROTANKS INTO A KANGER AEROTANK – $5.99

Not quite sold on the AeroTank itself yet? Well, now you are able to buy the base and attach it to your ProTank, ProTank II, or ProTank 3 (or get a backup for your AeroTank), and see the difference that having an adjustable air flow base can really have. This base gives you the option to be able to control exactly what kind of hit you want to take from your other Kanger tanks; whether it be a tighter or airier draw. In the past, these options were nonexistent, or took much more work to get the desired results. The base weighs in at approximately .5 oz. The diameter is about .73 inches and it measures about .67 inches tall.
 

Compatibility

    The base fits the Protank 1 and 2 while using single coils heads.
    It fits the Protank 3 with dual coils heads.

I bought 5

WHERE:  >>> HERE <<<

$5.99

EGG ON THEIR FACE: AND YOU DOUBTED ME? THE DNA30 IS LIVE

 
Back during Vapercon I broke the story that DNA30 was coming.  Many thought I was either lying or just plain wrong.  As usual, my sources were right and a lot of people have a massive amount of egg on their face.  I was also correct in suggesting that ZEN’s new ZNA was going to be using the DNA30.  Time to make some omelets boys and girls.


ORIGINAL POST FROM NOV 4TH: CAN BE FOUND HERE

ZNA using THE DNA30


THE HARD COPY:


The DNA system lets anyone build Evolv’s revolutionary power regulated technology into their own products. The DNA 30D is a power regulated digital switch-mode DC-DC converter for personal vaporizers. It offers controlled power from 7 to 30 watts, runs from a single lithium cell and includes protective features such as overcurrent, over and undervoltage protection and a thermal shutdown. It features a small OLED display, analog or digital user controls, power adjust lock, onboard buttons and synchronous rectification for maximum battery life and minimal heat generation.
The DNA30D is the same size as the DNA20D.

* Order quantities of 1 or 2 DNA30D’s will ship immediately. Orders quantities of 3 or more DNA30D’s will ship after January 22nd.

Manufacturers please contact us directly for volume orders.

WHERE:  >>> HERE <<<

____

UPDATE (6:30PM): 

A MOD ENVY WORTHY NOTE: TONIGHT ON NAKED IN THE WOODS – ZEN WILL BE A GUEST WITH CIGARBABE AND GIVE A ZNA w/ THE NEW DNA30 AWAY TO A LUCKY WINNER!

CHECK IT OUT @ 10PM EST – http://www.novabroadcasting.org

 

BACK IN STOCK: EFEST 30AMP 18650 – 2100mAh – $8.29

Efest 18650 – 30amp – 2100mAh

The first of the new Efest purple wrap batteries are hitting the market.  High amp with high mAh value – the best of both worlds.  Perfect for those sub-ohm builds.

THE HARD COPY: 

Model: Efest IMR 18650 V3 2100mAh
Size: 18650
Capacity: 2100mAh
Top: Flat top
Weight: 50g
Nominal Capacity: 2100mAh
Nominal Voltage: 3.7v
Discharge temperature range: -10°C—60°C
Charge temperature range: 0°C—40°C

WHERE:  >>> HERE <<<

THE DEAL:
USE COUPON CODE 5OFF TO BRING THE TOTAL TO $8.29

QUAD COIL: THE IGO-W3 STYLE DRIPPER – $7.24

Igo-W Style Rebuildable Atomizer

Here is a fantastic deal on a IGO-W3 style rebuildable atomizer.  These can be set up to run up to 4 coils and have air flow control.    For under $8.00 its a great price. 

THE HARD COPY:

  • Dripping atomizer
  • Stainless steel 510 drip tip
  • Adjustable airflow
  • 5 air holes located on the top cap
  • 5-post system
  • Chromed brass center pin and internal posts
  • Build using silica wick and wire
  • Double o-rings on base
  • Height without drip tip: 30.9mm (Approx.)

WHERE:  >>> HERE <<<

$7.24

ROLLOUT AND BLOWOUT: THE KICK FORCE ADAPTER W/ A KICK – $19.99

Kick Force Adapter w/ a Kick
The Force Kick Adapter

The Force is an external power adapter that turns any mechanical mod into a variable wattage device. It performs exactly the same function as The Kick, but instead of placing it directly on top of your battery, it screws into the 510 connection. The top of The Force unscrews to reveal a modified Kick underneath. To adjust your wattage, unscrew the top of The Force, and use a phillips-head screwdriver to turn the dial on top of The Kick.  The Force will output any wattage between 5 and 12 watts. The Force has 510 and eGo threading, allowing you to use virtually any style of atomizer. This is perfect for all those mechanical mods that are unable to fit an 18650 with The Kick! With The Force, any mechanical mod with a 510 connection, in any battery configuration, can be turned into a variable wattage device! The Force comes included with a Kick already installed. May The Force be with you!

This will work on all mechanicals and unregulated 3.7v mods (i.e. the bolt, silver bullet, etc).

WHERE:  >>> HERE <<<

$19.99

READY TO SHIP: THE TURTLE SHIP REPLICA MECHANICAL – $29.99

The Turtle Ship Replica

One of the most anticipated mechanicals to come in a while.

THE HARD COPY:

The main 18350 tube of the Turtle Ship clone features the signature UVO Korean laser etched engravings on both the front and back side. The Turtle Ship clone is composed of 100% stainless steel and comes with a total of 3 battery tubes to be able to easily change the length of your device and to accommodate an 18350, 18490 or 18650 batteries. 

The Turtle Ship clone mod has a brass atomizer contact pin and a brass bottom firing pin for ultimate conductivity. The white delrin ring on the Turtle Ship clone’s button allows you to adjust the delrin piece upwards/downwards to eliminate any unwanted battery rattle inside the mod. The Turtle Ship clone features a locking ring to allow the mod from any unwanted firing when placing it in your pocket or setting it down on a table. The Turtle Ship clone has a 510 atomizer connection which will fit most atomizer and is 22mm in diameter. 

WHERE: >>> HERE <<<

$29.99

TOP NOTCH: THE 4 BAY LCD BATTERY CHARGER BY EFEST – $28.99

Efest 4 Bay LCD Charger

I have been using two of these now for over a month.  
By far one of the best chargers going – charges your batteries quickly.

Finally the 4 bay version of the LCD battery charger by Efest!  The original 2 bay version was a big success but there was a problem – only 2 bays!  Your getting the 4 bay version for around the same cost as the original 2 bay version.  These charge everything from 10440 to the very large 26650!


THE HARD COPY:

Introducing the brand new Efest 4 Bay LUC Charger.

1. HD mini LCD screen to display precise voltage and battery capacity level.
2. Each charging channel has an independent display of charging status.
3. Automatically adjusts discharge current to charge different size battery.
4. 4 kinds of protection for over-discharging, over-voltage, short-circuit and reverse polarity protection.
5. Automatically stops when battery is fully charged.
6. With DC wide voltage (12-24V) charging mode.


Includes both the power supply and car charger.

WHERE: >>> HERE <<<

$28.99

HOW LOW CAN YA GO: GOLD PLATED PATRIOT REPLICA – $5.73

Gold Plated Patriot Dripper Replica

Can it get any cheaper?

One of the most attractive replica drippers we’ve seen, this new one dubbed the “Chi-Triot” was inspired by the popular Patriot Dripper. It’s constructed of gold plated brass and features a deep drip well with a three post configuration ideal for thirsty dual coil builds. Holes through the posts and phillips screws mean it’s an easy build and won’t have you hunting for allen keys. Drip tip is included.

WHERE: >>> HERE <<<

$5.73 

AIR FLOW: KANGER AEROTANK + 10ML BOTTLE OF JUICE – $22.49

Kanger AreoTank
The Kanger Aerotank with Airflow Control offers the same great features and performance as the Kanger Protank – II but with the introduction of a dual coil atomizer head! It also has adjustable airflow control. Turn the dial on the base to increase or decrease airflow to your preference.

    Adjustable Airflow Control
    Pyrex tank is replaceable
    Glue Free: All parts are replaceable
    Can be fitted with 510 Drip tip
    Replaceable Dual Coil Atomizer Heads 

    Pyrex Glass Tank (Same replacement glass as Protank II and 3)
    Advertised with a 2.5ml capacity
    The Aerotank is 510 Threaded and it will work on 510 thread MOD/APV
    Dimensions: 2-3/16″L x 3/4″D (without drip tip)

Box Contents:

    1 x Kanger Aerotank with Airflow Control (Pyrex tank, top cap, bottom cap and 510 base)
    1 x 510 Drip tip
    1 x Ego Cone Cover
    2 x Dual Coil Atomizer Heads

 
WHERE: >>> HERE <<<

THE DEAL:
USE COUPON CODE JOE10 TO BRING THE TOTAL TO $22.49

INSTRUCTIONS ON HOW TO GET YOUR FREE 10ML:
  
On the payment page, below Order Comments, you can enter your favorite flavor and nicotine level from Millenium Potion Juice line. 

DRIP DRIP DRIP: THE VORTEX – $7.43

The Vortex RBA

We’ve seen a lot of PMMA caps coming out for the drippers lately, but here’s an idea this blogger can actually get excited about! The Vortex features stainless steel construction, but with something special: PMMA windows in the steel cap. Where’s the airhole? It’s in the PMMA, making it ridiculously easy to drill out or even add an additional hole if desired. The positive pin is offset and both connections are thumbscrews for an easy and versatile build. Comes with the drip tip. 

WHERE: >>> HERE <<<

$7.43 + FREE SHIPPING

ROLLOUT: THE INNOKIN DRV – IN CAR DEVICE (AKA THE SHOWER HEAD)


Ok.. at first glance… WTF IS THIS???

Im calling this the Innokin Shower head.

In short – this is a new variable voltage device that plugs into your car’s cigarette lighter.  There is a cable with a 510 connector that plugs into the side.  The user would dial in the voltage and vape away.   Very interesting!   This would be the first purpose built mod for a car.   The video below shows the vaper using the cable that plugs into the above device.

These will be available soon!


This shit is Pananal!


REV 2: INLINE VOLT METERS – $13.49

Inline volt meters have been around for years and have been a necessary tool for vapers.  Today Madvapes has released revision 2 – and they are about $5.00 cheaper than the original. These are a must for anyone looking to test battery voltage, voltage drop / under load. 

THE HARD COPY:

These 3 digit Red LED displays will show the voltage of an attached DC power source with an accuracy of .005 volts!

These are assembled into a small clear tube with 510 connectors and will show voltage of the battery and voltage under load with an atomizer attached. These indicators may not work properly with devices that use switching or pulsing regulators and will just flash. Reads 2.8 to 25.2 volts. Updates at about 2 second intervals. 

WHERE:  >>> HERE <<<

THE DEAL:
USE COUPON CODE
jan10off TO BRING THE TOTAL TO $13.49

BACK IN STOCK: INNOKIN ITASTE MVP2 – $39.99 (USA)


Innokin iTaste MVP2



The last run was huge and now they are back in stock with colors.

I OWN TWO. LOVE THEM!

The original MVP was a huge success and is still a very popular mod.  The new version is a variable wattage version with some nice upgrades.  For the price its a complete no brainier.


1. Variable Voltage / Wattage
2. Ohm reader/checker
3. Improved Button
4. Comes with Iclear30’s rather then Iclear16’s

IN THE BOX:

MVPv2

Iclear30
Charging cable
Beauty ring
clear jewel case

WHERE: >>> HERE <<< 

$39.99