24 HOURS: 21,000,000 HITS – DAY OFF

Another 1,000,000 has ticked off the counter and this means a well needed day off for the Vaporjoe’s network of sites.  The last week has been extremely busy with deals and news.    We have also opened a new Vaporjoes Network page on Facebook you might want to check out – A place for vapers to get non-deal related information and news on whats going on in the community.  

WHERE: >>> HERE <<<

Deals will resume tomorrow Sunday the 19th at Noon EST

(BACK IN STOCK) PORTABLE WATTAGE: ITASTE VV – V3 – $25.99


 
These are widely popular.  Every time I put these up – they sell out.  
I try to get them back on the blog the moment they come back in stock at this price.

The Itaste VV – V3 is basically a compact version of the MVP2.  A super portable design for those on the go or who don’t want a large mod but want variable wattage. These are the smallest variable wattage devices on the market currently.  At this price, a bargin.

THE HARD COPY:

iTaste VV v3.0 Quick Details

  • Size: 15mm x 15mm x 108.5mm
  • Available Colors: White, Black, Chameleon
  • Battery Capacity: 800 mAh
  • Charge Time: 1.5 Hours
     

iTaste VV v3.0 Features

  • The iTaste VV v3.0 is a microprocessor controlled variable voltage/variable wattage (vv/vw) personal vaporizer that lets you adjust the voltage or wattage in seconds with just a few button presses.
  • 510 and eGo Threads.
  • Variable Voltage
  • Variable Wattage
  • Resistance (ohm) Meter
  • Puff Counter
  • Short Circuit Protection
  • Over Discharge Protection
  • Remaining Battery Voltage Display
  • On/Off Power Switch
  • 10-second Cutoff
  • Passthrough Feature (gives you the ability to use the device while charging)
  • Remembers last voltage or wattage setting when switching batteries.
  • LED Display
$25.99

GOT IT RIGHT: 22MM PATRIOT RDA – $6.07

22MM PATRIOT RBA

THE HARD COPY:

Some of the most attractive replica drippers we’ve seen, those dubbed “Chi-Triots” are inspired by the popular Patriot Dripper. This one is constructed of stainless steel and features a deep drip well with a three post configuration ideal for thirsty dual coil builds. Holes through the posts and phillips screws mean it’s an easy build and won’t have you hunting for allen keys. Drip tip is included.

So what’s special about this one?
The first ones to come out were only 20mm….. this one is a full 22mm!! 

  • Dripping Atomizer
  • Stainless steel 510 drip tip
  • Single air hole located on top cap
  • Chromed brass internal posts
  • Triple-post system for single/dual coil build
  • Double o-ring seals on base
  • Height without drip tip: 32mm / 1.26″ (Approx.)

WHERE: >>> HERE <<<

$6.07

BLOWOUT: SMOKTECH S.I.D. VARIABLE WATTAGE MOD – $25.77

Here we have the smoktech S.I.D.   A very popular variable wattage device and a very good price.  If you were in the market for a new VW tube mod and didnt want a VAMO or SVD – here is a great alternative and CRAZY price for a USA vendor.


THE HARD COPY:

  • Variable wattage – can be adjustable from 3.0W to 15.0W (0.5W increments)
  • Variable voltage – can be adjustable from 3.0V to 6.0V (0.1V increments)
  • One button with 7 menus
  • Maximum current output: 4A
  • Built in LED display showing menu, function and selection
  • Reverse polarity protection
  • 510/ eGo threading connector 
  • Can be powered by 1*18650 battery (battery sold separately)


WHERE: >>> HERE <<<

THE DEAL:
USE COUPON CODE MLK40 TO BRING THE TOTAL TO $25.77

RAISED THE PRICE THE MOMENT I POSTED THIS DEAL.

submit to reddit

BREAKING: 30+ WATTS – CHINA HAS IT AND ITS ONLY A SOFTWARE UPGRADE

co·in·ci·dence
kōˈinsədəns,-ˌdens/
noun: coincidence
1.
a remarkable concurrence of events or circumstances without apparent causal connection. 

THIS IS AN UPDATE: FROM OUR LAST POST HERE

Just 12 hours hours after breaking the news of China’s 22W board we have learned new revelations. The 30 Watt capability is nothing more than a software upgrade to the chip.   They make a number of chips but the one im looking at is the DIY 20/25/30 Watt chip that looks pretty great.  Its also very customizable to the modders needs. 

As these first 30 watt Chinese chips get cloned by other companies the price will become INCREDIBLY low.  Also –  wattage limits will continue to rise quickly as more and more companies jump on the bandwagon requesting higher limits to have the next sound byte.

From the manufacturer:  (excuse the chinglish) 

Except below three products, we will have SX350 which power can be 30W. SX220D which design specially for DIY lovers( Screen and board will be separately, USB pinout and board will be separately, button can be separately from board ) Others like in the future, same board , you can download one software then can upgrade from 20W to 25w or 25W to 30W” 

If you get some requirements from your buyers, pls let me know. We will let their idea be reality. All the suggestion and comments”like touch fire button in winter….” I will take with boss Mr. Chen and their genius software&hardware team. Our Slogan is ” Innovation for you”. The products we design and produced must suitable to the consumer . so let’s work together and service for more and more Vapor lovers. 

IN SHORT: ALL YOU NEED IS A SOFTWARE UPGRADE TO GET 30 WATTS 

MANUFACTURER: >>> HERE <<<

SHOCK AND AWE: THE CHI-NA 20 (DNA-20 REPLICA) – 30W COMING

UPDATE: OVER 20,000 VIEWS TO THIS POST IN UNDER 7 HOURS

The first mod housing already being made to hold the chip
co·in·ci·dence
kōˈinsədəns,-ˌdens/
noun: coincidence
1.
a remarkable concurrence of events or circumstances without apparent causal connection.

The day after we are all talking about a new 30 watt chip –  China now has a DNA20+ replica that can actually reach 22W.  There are some impressive features with this board.   This could be a very cheap alternative to the hungry masses looking for a DNA20+ experience .  This board is claiming to handle .5 ohm builds – so its actually superior to the original 20 watt board in many respects. 

22W sub-ohm capable mod boxes at super affordable prices?

With 22W already reached – how long will it take China to officially pass the 30w mark?  NOT LONG

Ready to Ship to mod makers

UPDATE TO THIS POST LOCATED HERE

THE $16.00 PROMETHEUS REPLICA

The Prometheus Replica

The Prometheus is made from stainless steel. This RBA Tank has three posts; one positive post and two negative posts, to give you your desired build style. The Prometheus features an adjustable copper 510 connection and adjustable air-flow ring that is lockable by the top cap. 

THE HARD COPY:

  • Genesis style RBA
  • Stainless steel 510 drip tip
  • Air flow control ring on upper body
  • Chromed brass center post
  • Stainless steel protective shield
  • Clear PMMA tank
  • Copper 510 contact pin (adjustable)

WHERE: >>> HERE <<<

$16.15

THE YEAR OF THE 26650: THE BIG NASTY – AN EXAMPLE OF HOW ITS DONE!

I didn’t want to pimp this until I actually bought it.  As I predicted this would be the year of the 26650 and the Big Nasty is a prime example of what the community has been waiting for.  The Big Nasty goes a step beyond.  In terms of an American made mechanical, its at a reasonable price.  We have seen mod makers charge twice as much for essentially a battery tube with some cake decorating on it.  Thus, the clones have taken over and many mod makers are having a hard time selling their once prized products.

The Big nasty is a rock solid mechanical, has a beefy magnetic switch, and little voltage loss.   Mix that with a 26650 design and a high amp 26650  – and you will tickle even the most skeptical sub-ohmer in their “nono” spot.

In terms of size the Big Nasty is 38mm wide but is shorter than the 18650 Poldiac. 
Its girth tapers nicely at the top to complete the 23mm finish.    A thing of beauty.

The mod with my VA Kraken on top

 

If your looking for a quality mechanical – you HAVE to check out the big nasty.   
I applaud Cigtechs for bringing this to market – It’s exactly how I would have done it.

.. now if we could only get a 32650 mechanical 😉

2nd round ships Jan 30th – get in before they sell out again.

WHERE: >>> HERE <<<

BEDAZZLED: 1100mAH EGO IFEEL v2 KITS – $14.99 SHIPPED (USA)

So the guys from AtoZvaporworld hit me up with a great deal on ego start kits.   These are all bedazzled and come with a clearomizer, charger, and a case.  Each battery is 1100mAh so it should last the average vaper most of the day on a single charge.   At $14.99 shipped – its a great deal!  These are China prices here in America.

THE HARD COPY:

eGo iFeel V2 1100mah Kit – Ladies, who doesn’t like to have a little bling in their purse for a night out on the town? Something compact yet sassy. Our premium crystal ego style batteries are just what you are looking for. With 8 different styles you can pick the color that shows your personality. These high quality ego style batteries are as familiar as your traditional eGo pen styles. With 5 clicks on and 5 clicks off function and an ego battery connector you can make your vape statement and show of your vape style without having to familiarize yourself with a new device. Reliable, elegant and easy enough for even a beginning vaper to use and show their individuality. 

This kit comes in a variety of stunning styles. Complete witjh a small zipper carry case, your mod, a CE5 Clearomizer (that can accomdate replacement wicks) and a charging cable.  Be sure to look at all the pics as we have matched up the kits for you. But as you know, A to Z Vapor World will customize and do anything for the #AtoZArmy. If the case isnt the color you want or the clearomizer isnt the color you want dont worry we have you covered. Check out the add ons available  or head over to the clearomizer section and go wickless with out great selection of wickless CE5+ clearomizers for this great night out on the town vape kit.

WHERE: >>> HERE <<<

$14.99 SHIPPED

GIVE ME NIPPLES: FLAT TOP BATTERY ADAPTER – $2.49

Here is a neat idea and im surprised no one thought of it until now.   These convert your flat top batteries into nipple tops.   Much safer than magnets which can slide around and cause a short.  So for those PV’s that require nipple tops or you need a bit of length in your battery – check these out.


THE HARD COPY:

Flat Top Battery Adapter


This is an adapter that turns any flat-top battery into a button-top battery. Simply place the adapter on top of your flat-top battery to simulate a button-top. Some devices won’t accept flat-top batteries, so this is a great item to keep around in case you stumble upon one such device. Adds minimal length and resistance to the battery.

WHERE:  >>> HERE <<<

$2.49

GIVING IT AWAY: THE $14.00 STAINLESS STEEL KAYFUN LITE REPLICA

Kayfun Lite Replica

We all know them, we all love them.  Now you can get one under $15.00.  I could understand a chrome plated brass version, but stainless steel?  A crazy bargain!    If you were thinking about trying them or wanted a few extra — Stock up!

THE HARD COPY:

  • Standard 510 drip tip
  • Polycarbonate(PC) tank section
  • Chromed brass 510 contact pin
  • Bottom screw fill-hole 
  • 22mm diameter
  • Pre-assembled coils

WHERE:  >>> HERE <<<

$14.39

DOMINATE: THIS MAKES ALL OTHER CHIPS LOOK LIKE AN EGO ( 100 WATTS )

We have been talking about the wattage boards for a while now.   The people over at grand innovations have been quietly making a Trojan horse.  This chip-set is capable of over 100 watts and has a display system that makes all others look like something from the stone age.   It is absolutely  incredible what this chip / mod is capable of.     We first brought them out on the blog / Mod Envy when they had the 40 watt version – Now the upgraded version is pretty exciting stuff!   Check out their page and see what kind of mod magic is going on over there.  This will rock the community when its mass produced and I’m 150% behind it.

SPECS:


Variable voltage
Variable wattage
80-100 watts
max output 20 amps
max Real-time OHMS checker
Real-time current meter
Real-time Volt meter
Battery level meter S
Sub Ohms capability
Security Lock
Customized Serial number
Thermal Sensor On / Off switch
TFT Display

Micro SD ready
Wallpaper / Screensaver features
Bare / Anodized Aluminum Enclosure
Accepts 2×18650 battery

They are looking to produce 100 units this month.

The case is a bit rough but the chip-set is what I’m interested in.

WHERE: >>> HERE <<<

TURN YOUR OLD PROTANKS INTO A KANGER AEROTANK – $5.99

Not quite sold on the AeroTank itself yet? Well, now you are able to buy the base and attach it to your ProTank, ProTank II, or ProTank 3 (or get a backup for your AeroTank), and see the difference that having an adjustable air flow base can really have. This base gives you the option to be able to control exactly what kind of hit you want to take from your other Kanger tanks; whether it be a tighter or airier draw. In the past, these options were nonexistent, or took much more work to get the desired results. The base weighs in at approximately .5 oz. The diameter is about .73 inches and it measures about .67 inches tall.
 

Compatibility

    The base fits the Protank 1 and 2 while using single coils heads.
    It fits the Protank 3 with dual coils heads.

I bought 5

WHERE:  >>> HERE <<<

$5.99

EGG ON THEIR FACE: AND YOU DOUBTED ME? THE DNA30 IS LIVE

 
Back during Vapercon I broke the story that DNA30 was coming.  Many thought I was either lying or just plain wrong.  As usual, my sources were right and a lot of people have a massive amount of egg on their face.  I was also correct in suggesting that ZEN’s new ZNA was going to be using the DNA30.  Time to make some omelets boys and girls.


ORIGINAL POST FROM NOV 4TH: CAN BE FOUND HERE

ZNA using THE DNA30


THE HARD COPY:


The DNA system lets anyone build Evolv’s revolutionary power regulated technology into their own products. The DNA 30D is a power regulated digital switch-mode DC-DC converter for personal vaporizers. It offers controlled power from 7 to 30 watts, runs from a single lithium cell and includes protective features such as overcurrent, over and undervoltage protection and a thermal shutdown. It features a small OLED display, analog or digital user controls, power adjust lock, onboard buttons and synchronous rectification for maximum battery life and minimal heat generation.
The DNA30D is the same size as the DNA20D.

* Order quantities of 1 or 2 DNA30D’s will ship immediately. Orders quantities of 3 or more DNA30D’s will ship after January 22nd.

Manufacturers please contact us directly for volume orders.

WHERE:  >>> HERE <<<

____

UPDATE (6:30PM): 

A MOD ENVY WORTHY NOTE: TONIGHT ON NAKED IN THE WOODS – ZEN WILL BE A GUEST WITH CIGARBABE AND GIVE A ZNA w/ THE NEW DNA30 AWAY TO A LUCKY WINNER!

CHECK IT OUT @ 10PM EST – http://www.novabroadcasting.org

 

BACK IN STOCK: EFEST 30AMP 18650 – 2100mAh – $8.29

Efest 18650 – 30amp – 2100mAh

The first of the new Efest purple wrap batteries are hitting the market.  High amp with high mAh value – the best of both worlds.  Perfect for those sub-ohm builds.

THE HARD COPY: 

Model: Efest IMR 18650 V3 2100mAh
Size: 18650
Capacity: 2100mAh
Top: Flat top
Weight: 50g
Nominal Capacity: 2100mAh
Nominal Voltage: 3.7v
Discharge temperature range: -10°C—60°C
Charge temperature range: 0°C—40°C

WHERE:  >>> HERE <<<

THE DEAL:
USE COUPON CODE 5OFF TO BRING THE TOTAL TO $8.29