ROLLOUT: ANGO R80 – TELESCOPIC SIDEWIDER / PIPE MOD

EGO CONNECTOR FOR CLEAROMIZERS




UPDATE ON THE NAME:  ANGO R80 

Here is a very very cool looking mod I was sent photos of.   Its a Telescopic sidewinder style mod that also doubles as an epipe!  Im sure there is a wire going from the button to that 510 connection so it wouldn’t qualify as a mechanical.   Either way I think its an awesome design!  Im sure they will be in the same price range as the K100/K101.

Vendor said they were from: http://ecigs-factory.com

Vendors and CoOps – have at it.

submit to reddit

PRICE WAR: THE CHI-METHEUS (Prometheus) – $29.99

Chi-metheus


Venerable Vaping has dropped the gauntlet and dropped the Chi-metheus at $5.00 cheaper than anyone else.  A very sexy RBA TANK!  A steal at this price..


THE HARD COPY:

It features a copper pin, an adjustable airflow ring that is locked in place by tightening the top cap. Its design has one positive post, and two negatives, which accommodates the building of multiple coil configurations. 


The top post is slotted for easy application of coils (micro or otherwise) 
Wick holes are similar in size to the turbine atty.

The air flow controls on this are full of options.

WHERE:  http://www.venerablevaping.com

$29.99

submit to reddit

FULL MONTY: THE K101 KIT (TONS OF EXTRAS) – $36.99

Here we have a huge mechanical kit at a great price!  This kit has everything you will need plus even more extras!  The K101 is just like the K100 (AKA Chempire) but with a different look. In your choice of many different colors.

WHATS IN THE KIT?

  • 1 x K100 Mechanical Telescoping Mod Device 
  • 1 x 18650 2000mah 3.7v Battery
  • 1 x 18350 900mah 3.7v Battery
  • 1 x Adjustable Battery Charger
  • 2 x 510 Cartomizers (1 pre-installed)
  • 1 x Color Matched Cartomizer cone
  • 1 x Stainless Steel Calabash Drip Tip
  • 1 x Blue zipper pouch
  • 1 x Battery fuse

All that for under $40.00 is a STEAL

WHERE: http://101vape.com/

$36.99
BONUS: $1.99 FLAT RATE SHIPPING

submit to reddit

IN FORCE: THE NIMBUS REPLICA – $5.23



The Nimbus replica


 

Simple – Clean – Built Well – Affordable!

Something we haven’t done in a while.. a simple dripper.

Looking at the picture above it almost makes you wonder if the same factory makes the real thing (cough).  Very well built – they rock for the that low price!

Stainless Steel
3 Post system for Dual Coils
Laser Etched “Pattern”


WHERE: http://www.fasttech.com

$5.23

submit to reddit

(UPDATE) AT YOUR OWN RISK: MTBAKERVAPOR PULLS ALL CINNAMON FLAVORS

Is that the reading rainbow van?


One of the largest ejuice makers in the world has decided to pull all juices containing cinnamon.  Some recent studies and articles have stated that cinnamon may be toxic when vaped.  The mere mention of toxic in the vaping community can bring a slew of liability issues for juice makers and their insurers (if they have one).

Will this be a growing trend? Let the discussion and debate begin.. 

LOCATION OF THE FINDINGS CAN BE FOUND HERE 

This shows some real dedication by this juice company.  Cinnamon flavors are very popular and  they stand to lose a ton of sales.   This just one example of how the vaping community is very capable of policing and regulating itself.  Hats off to Mtbakervapor for this bold move.


MT BAKERS STATEMENT: 

Here at Mt Baker Vapor we have been following the recent studies about Cinnamon flavors very closely. At this time we do not have enough information to make a statement on the issue either way. At this time we have decided to remove any flavors that contain Cinnamon while we continue our research. Our biggest concern is our customers and their health. We will keep you all posted on this situation. Please feel free to contact at [email protected] if you have any comments, questions or concerns.

When a juice maker that fills thousands of bottles a day does this – you should listen.

Taken from their Facebook page


24 hours later the establishment responds.

UPDATE 11/21:   
ARTICLE OPPOSING THE SCIENTIFIC STUDY

UPDATE 11/21:
THE VAPING GREEK RESPONDS TO THE STUDY

MY VIEW:
I am not a scientist and have no opinion on the toxicity of cinnamon.  What I DO agree with is a juice maker being extra cautious.  Some would call that panic on their part, I call it good business.  Looking after your customers can only be positive.  After all — we ARE putting these things in our body.  More research is needed.

submit to reddit

EMAX: SMOKTECH BRINGS VARIABLE WATTAGE TO AN EGO

Smoktech Emax Ego Battery



Its finally happened — variable wattage in an ego design.   Meet the new Smoktech Emax.    Smoktech is stepping up their game and leapfrogging ahead of Joyetech. 

These will come in 650 / 900 / 1100 / 1300 mAh battery sizes

It has 2 modes to switch. One is the variable voltage mode which can adjust from 3.2V to 4.8V. the other is variable wattage mode, in this mode, the wattage can be adjusted from 4.0 to 14W.  Some say only 12 watts, I’m inclined to believe the lower number.

Let the CoOps and Pre Orders begin!

WHERE:  http://www.alibaba.com/

 
submit to reddit

SPACE AGE: THE SIGELEI LEGEND – GRAVITY SENSING MOD – $56.80

Sigelei Legend Variable Wattage Mod

The Sigelei Legend is live.   A lot cheaper then I expected.  These are a Evic style mod with a gravity sensing system.   These were originally going to be over $100.00 ea – until Sigelei realized how suicidal that was.  These are very interesting and Ill be picking one up to check out. 

THE HARD COPY:

  • Variable wattage – can be adjustable from 3.0W to 15.0W (in .1W increments)
  • Variable voltage – can be adjustable from 3.0V to 6.0V (in .1V increments)
  • Features a 5 click On/Off switch
  • Large-Size OLED screen shows:(resistance, voltage/wattage, settled vaping time, battery level and puffs)
  • Gravity sensing system
  • 5-20 seconds cutoff
  • Short circuit protection
  • Low voltage warning
  • Reverse polarity protection
  • Removable top cap
  • Floating 510 center pin
  • 510&eGo threading
  • Compatible with 1*18650 unprotected battery (batteries sold separately)

$56.80

submit to reddit

LIVE: POLISHED STAINLESS STEEL PROVARI


Polished Stainless Steel Provari – Limited Edition



Provari has released a 2nd round of their polished stainless steel edition of the Provari 2.5.   These are expected to be highly prized due to the “shiny” factor.   These will be a very limited edition run.

This will be the last run before Christmas.  Last run sold out the same day.



THE HARD COPY:

 ProVari™ Polished Stainless Steel E-Cigarette V2.5
If you’re looking for the highest quality and best looking electronic cigarette, the ProVari is the right choice!

• Polished Stainless Steel ProVari variable voltage electronic vaporizer.

The ProVari Polished Base Model Includes:
• 1 ProVari™ Polished variable voltage electronic vaporizer. New Design
• 510 Atomizer Connection



Features of the ProVari Polished SS Electric Cigarette:

• Microprocessor controlled
• 2.9-6.0 variable voltage range with .1 volt increments
• Built-in digital display
• AccuSet™ Technology – Self-Calibration Feature
• Atomizer Ohm’s checker built-in
• Battery voltage checker built-in
• Translucent light-up pushbutton with low battery indicator
• Single battery design
• Stock 510 Connection
• Classy looking and made of stainless steel
• 16 second safety cutoff
• Short circuit protection
• Reverse battery protection
• Thermal monitoring system
• Amperage limiting
• Battery monitor and over-discharge protection
• Machine engraved logo
• Vented for added safety
• Proudly made in the USA
• 1 Year warranty with optional 2 year warranty
• Measures – 4.1″ L X .90″ Dia.(without atomizer)
• Weight – 4.2 ounces (without battery)



WHERE: http://www.provape.com

BONUS: 1 YEAR WARRANTY

submit to reddit

THE LAUNCHER REPLICA V2 – $19.66

The Launcher V2 – Stainless Steel and Copper Contacts

A very good looking mod….

Inspired by a Pinoy mechanical, the Launcher Replica is a bottom-firing, telescopic mechanical mod with stainless steel body, and copper contacts.  This version has logoing on the body and bottom button. 

THE HARD COPY:

  • Polished stainless steel 
  • Top cap with air-channels cut 
  • Adjustable 510 center pin (copper)
  • Telescopic tube
  • 4 well-aligned vent holes
  • Copper contacts
  • Black Derlin insulator
  • Spring-loaded bottom firing switch
  • Recessed 510 threading connector
  • Powered by 1*18350/1*18500/1*18650 (batteries sold separately)


WHERE: http://www.fasttech.com

$19.66 + FREE WORLD WIDE SHIPPING

submit to reddit

MECHANICAL BLOWOUT: SIGELEI #20 VERSION 1.5 – $14.99


I was going to put this deal up earlier but I didn’t want to mislead my readers with the wrong picture.  These are a unique version of the Sigelei #20 and an unbelievable price!   These are an upgrade to the original #20 with a improved spring and button.

THE HARD COPY:

An awesome vaping machine! This is the Sigelei#20 Telescoping Mechanical Mod. The Sigelei#20 Telescoping Mechanical Mod is beautifully machined out of Solid Stainless Steel and nicely finished. Just Gorgeous!!! Looks, feels, and performs like a really high end piece.

Sigelei#20 Telescoping Mod Features:

Top side stainless steel fire button. Fire button rotates to on and off position.

Accepts 18350, 18490, 18650 IMR batteries.


WHERE: http://101vape.com/

$14.99 

submit to reddit

LOW: TELESCOPIC PROMOD+ STAINLESS STEEL – $19.99 FREE SHIPPING

ProMod+ Stainless Steel Mechanical



Here is a great deal on a good basic mechanical.   This mechanical is telescopic, bottom firing, and made of stainless steel.    This mod is only $19.99 and free shipping from a USA vendor.  A great deal!

Features Include: 

* Stainless body
* High quality mechanical parts 
* Mechanical bottom button
* Safety features such as insulated body and air holes in the main cup
* Telescopic design works with multiple battery sizes
* Mechanical design makes this a very reliable device. No PCB board
* 510 connection 

WHERE: http://www.vaporbeast.com/ 

$19.99 + FREE SHIPPING


submit to reddit

DRIP TIP JUNKIE: DISPLAY THEM FOR $5.13


Drip Tip Stand – 23 Tips



Finally an affordable drip tip stand!  Display up to 23 drip tips.  These use a two tiered system to ensure all types of 510 drip tips fit.  Love it for the price!

THE HARD COPY:

  • Two tier structure
  • Each hole size(upper tier): 13/32″
  • Each hole size(lower tier): 5/16″
  • Widely used in B&M vape stores, supermarkets, and other places for display


 
$5.13 + FREE WORLD WIDE SHIPPING

submit to reddit

ROLLOUT: THE BLACK NZONIC REPLICA

Finally something with some new personality!

Here we have an extremely sexy mod.  The black Nzonic replica with gold plated accents. 

I was the first one in line to buy one.  🙂

THE HARD COPY:

-full telescopic design
-silver plated contacts
-smooth magnetic button
-winged logoing included
-threads feel smooth as butter
-universal 510 connection
-PVD Coated in Black with gold plated accents
-hands down one of the cavemans all day mods to vape on.
-locking mechanism for the bottom switch.
~Voltage drop under 0.12~0.16 made of silver-plated copper connector pin 

WHERE: https://c2cvaping.com 

submit to reddit

ROLLOUT: KANGER UNITANK MINI – $10.57

Kanger Unitank Mini

I LOVE the top filling Kanger Uni-tank.  In my opinion its one of the best kanger pro tanks going. These use the same heads as all previous versions of the pro tank.  I haven’t seen any American vendors currently stocking these.


THE HARD COPY:

The KangerTech Unitank Mini is the newest Kanger tank on the market. What sets the UniTank Mini apart is that it can be filled from the top! No more unscrewing your entire device and filling it upside down. The UniTank Mini allows you to unscrew the top and refill it while it’s still attached to your device.

  • Can be filled from the top
  • All parts is replaceable
  • 510 connector, compatible with eGo batteries and 510 threaded mods /APV s


WHERE: http://www.fasttech.com

$10.57+ FREE WORLD WIDE SHIPPING

submit to reddit

THE CLONE RUSE: THE ORIGIN FALLS TO TOBECO

The Origin falls victim to Tobeco.  Does this mean Aqua is not too far behind?  Hcigar has said they have already replicated it, but we have yet to see pictures.  Looks like a pretty well done one to one.


…on a side note that has nothing to do with the Origin.

Considering how fast clones are starting to come out – which mod maker(s) are double dipping and working for China?  Which mod makers are feeding China designs and product only the mod makers themselves have access to?  

How does a mod have a one to one clone BEFORE the original is released to the public?  It would require an inside player, or the mod maker themselves.  

This brings me to their first mistake! Released pictures of clones before the actual authentic product came to market.

Fingers are quietly being pointed, but nothing stays quiet in this community for very long.

This whole argument of cloning is nothing more than a ruse. 
They keep us fighting while a small minority make money from both sides.

When this comes to light – get ready for a shit storm ladies and gentlemen.


submit to reddit