ROLLOUT & BLOWOUT: Sigelei Kick Clone Preorder – $15.00

…its Whitestagvapor


THIS DEAL ENDS IN A FEW HOURS

Here is a CRAZY DEAL on the KICK clone by Sigelei.  I was in a Google hangout with the owner and he assured me these are real, live, and ready to roll.

THE HARD COPY:

Product Description

Sigelei Kick Clone – This is NOT the Kick by evolv

Hot selling sigelei new kick for telescope mod to adjust the voltage

THIS IS A PRE-ORDER SALE (10 days out)

The Kick is Boosted Power Regulation in the form of a drop in module designed to be used in various tube devices with IMR batteries. Foremost, the Kick is designed to be used in 18650 sized metal tube devices (max 19.5 mm internal diameter) using an 18490 or 18500 IMR battery. It can also be used in 18500 sized tube devices (max 19.5 mm internal diameter) with an IMR 18350 battery.
Unlike variable voltage, the Kick’s Power Regulation microprocessor will automatically, and constantly, adjust both the volts and amps levels (as needed) to provide consistent watts (vaping heat) output. The Kick, once users finds their preferred watts output, is more of a set it and forget it design. This is because the Kick will boost and regulate the power to provide the same watts output consistently from first activation to the last regardless of the atty/carto resistance.

Stainless Steel Mesh #400 12″ X 12″ — $7.50

….its Mesh Wizard

Here is a great deal on #400 stainless steel mesh.

THE HARD COPY:

One 12″ X 12″ sheet of #400 Stainless Steel Mesh

The mesh sold here at MeshWizard.com only supplies the latest, highest quality mesh, 316L. Perfect for making Wicks for Rebuildable Atomizers.

All of our mesh has already been hand washed with quality soap.
Our mesh’s edges have also been through a pair of Fiskar scissors, removing any major frays.

Each and every mesh order will be shipped with the product wrapped around a hard PVC tube. The tube, with the mesh wrapped around it, will then have bubble wrap wrapped around it. Finally, the bubble wrapped tube of mesh, will be packaged & sent to your location.

We have an immense amount of experience shipping Stainless Steel Mesh & Kanthal Wire.
We know what needs to be done to keep the product’s crisp, pristine condition during it’s journey to your doorstep.

Our mesh is a new batch right from the Stainless Steel Mesh twill weave spinning machines.

Only the best looking & best quality mesh is sold here at MeshWizard.com

NO FOLDS
NO CREASES
NO STAINS
NO TEARS
NO DAMAGE

WHERE: http://www.meshwizard.com/

THE DEAL:
Use coupon code
9537 to bring the total down to $7.50

SOON: The Caravela gets cloned

…its China


One days worth of evolution in the e-cig industry is like 6 months in another.  Things move super fast, and this particular clone is proof.   The Caravela – one of the most sought after mechanicals – now has a bulls eye on its back from China.   China is digging deeper in the ecig community to find higher end mods to clone. This futher shows that mechincals will continue to dominate the new mods coming out of China. 


UPDATED:  $38-$45.00 vendor cost.


WHERE: http://ehpro.en.alibaba.com/

Sponsor Transparency Statement



In accordance with the FTC regulations.

Vaporjoes is NOT an electronic cigarette merchant.  We are a blog for information only.

Vaporjoes does NOT charge vendors to be on our page.  Any coupon codes we offer ARE NOT affiliate codes.  We do not endorse any products or vendors, unless specified.  Rather then list each individual sponsor – readers should assume that Vaporjoes.com gets a small commission from any sales generated from this blog.


What Affiliate Links Are…

Affiliate links keep track of the referring page a visitor came from. Some of VaporJoes links let a supplier know that you came from us. A tiny commission (pennies) may be paid to the referrer.

What Affiliate Links Are Not…

Displaying an affiliate link does not mean that we are formally partnered with any vendor or supplier. It does not mean that any vendor or supplier receives preference when we choose the deals we bring you. Most importantly, it is utterly transparent to the end consumer in that there is absolutely no difference in cost. You’ll pay the exact same, regardless of how you arrived at the site.


Why Does VaporJoes Use Affiliate Links? 

There are financial realities associated with keeping a valuable informational blog like this in existence. While we’re passionate about vaping deals and sharing them, there are costs for servers, hosting, connections and time that must be addressed. Affiliate links, in a small way, help us to offset those costs without any burden or cost to the end consumer.


THANK YOU,

VAPOR★JOE

VigLink badge

LIVE & IN STOCK: The K200 KIT (aka Tesla Clone) – $59.98

…its AKAvapers

The K200 is live!  The variable wattage tesla clone is priced at just $59.98 for the full kit! 

THE HARD COPY:

Product Features of K200:

Powerful functions:
1. Variable votlage from 3.0V to 6.0V
2. Changeable work power from 5W to 15W
3. 7 different romantic background colors for screen
4. Digital display of the battery status
5. Newest function to measure the resistance of atomizer
6. Newest techniques to act as the detection tool of atomizer

Easy application methods:
1. Creative five-button pattern design with powerful function, easy to use.
2. Both large and exquisite buttons facilitate the flexible operations

Unique Apperance:
1.Real compound metal sense with attractive charming
2.Fashionable shape with delicate curving forms to catch customers

 K200 Battery Body  1pcs 
 ICR 18650 ( 2000mAh ) Dry Battery  2pcs
 Atomizer  1pcs
 Atomizer Coil  2pcs
 English Manual  1pcs
 Flexible Adapter  1pcs
 K200 Zipper Case  1pcs

WHERE: http://www.akavapers.com/


$59.98


ROLLOUT & HOT: The Smoktech E-Pipe

….its Smoktech


Wow… pretty hot looking epipe by Smoktech.  This little gem was sent to me by my CoHost Nitrobex.  From what I can see its either a 18350 or 18500 battery design with a top firing button.  This isnt a 3D model, so we can assume this is coming in May.  

CoOps and Vendors – start in inquiries!

 

IN STOCK: IGO-L RBA – $13.11

…its Myvaporstore


These are getting harder to find .. They are either out of stock or have an inflated price due to the demand.  This is a really great deal for those looking for a extremely well built dripping rebuildable.  In terms of a dripping atomizer – these are pretty large.


THE HARD COPY

  • Drip Atomizer
  • Sealed battery connector
  • Airhole located on outer casing (see images)
  • 510 Threaded
  • Two philips head screws for positive/negative post
  • Rebuild using fiberglass or silica rope and wire
  • Stainless steel body and base
  • Fits most 510 drip tips
  • Wick and wire sold separately

WHERE:  http://www.myvaporstore.com

THE DEAL:
Use coupon code riyan to bring the total down to $13.11

CRAZY: Cobra Clone RBA – $8.52

….its Fasttech

Here is a great deal on The Cobra Clone.   These are like the normal DID clones but hold 3.5ml vs the standard 2.5ml.  They come in a nice gift box, driptip, mesh, Wire, Hex Key.  They also have a different version with a stainless steel drip tip and engraved “Cobra” on the tank.

WHERE:  BLACK DRIP TIP
WHERE:  STAINLESS DRIP TIP

$8.52 / $11.86

Use coupon code CPASTE13SPRING to take 5% off your order

Iclear30 heads – $2.25 each or 5 for $10.00

….its Hoosiervapes


 
Hooiservapes is running a great deal on Iclear30 replacement heads.  They are $2.25 each and if you buy 5 or more they come down to $1.99 each.  These come in around 2.1 ohms.


WHERE:
https://www.hoosiervapes.com


$2.25 ea – 5 for $10.00

IN STOCK: Segelie T-Max Version 2 – $59.79

….its ExhaleVapers

Here is the Tmax Version 2.   The original version looked exactly the same but only used a very small 16340 battery.  After everyone screamed – they changed it.  Its now a 2 battery slot system that allows you to use a 18650 or a 18350.  This runs the standard Zmax v3 variable voltage / wattage system but in a metal box mod form.  I do not believe the segelei logo will on the mod.

If you like box mods – have at it!

No you can’t use both batteries at the same time. 

WHERE:  http://www.exhalevapors.com/

THE DEAL:

Use coupon code “VaporJoes11Percent” to bring the total down to $59.79

ON STOCK: Smoktech SID Variable Wattage Mod – $48.44

….its Madvapes

SID Variable Volt / Watt APV

The SID is a variable voltage / wattage device with a newly designed display making adjustments easy to access, read and understand.  The SID adjusts from 3.0 to 6.0 Volts in .1 volt increments or 3.0 to 15 Watts in .5 Watt increments.  The SID is made of polished aluminum and has a maximum output of 4 Amps.  .
The SID can read your output voltage, battery voltage and cartomizer / atomizer resistance.  This APV does it all. 

In addition, the SID has a native eGo style connector that allows you to use both 510 and eGo style cartomizers, atomizers and tanks without adapters.  The eGo style connector does not have outside threads but typical eGo style parts fit flush down into the recess that is around the SID connector. 510 Tanks and other similar 510 items will screw in and be almost flush with the top.

The SID will accept Flat Top or Button Top IMR 18650 batteries.

WHERE: http://www.madvapes.com

THE DEAL:Use coupon code april15off to bring the total down to $48.44

LOW: Innokin Iclear30 $9.98

….its Akavapers

Here is a great deal on the Innokin iclear30.  These have been hugely popular for its dual coil design and metal knucklehead drip tip.   At under $10.00 – its a great bargain!  Innokin has changed the packaging to a standard box.

THE HARD COPY:

The iClear 30 features dual coils, an easily replaceable atomizer head, a large 3ML capacity, and rotatable mouth piece.

Replaceable Dual Coil
Innokin iClear 30 is the first dual coil clearomizer with a replaceable atomizer head, making it very inexpensive to maintain, while providing huge amounts of vapor and flavor.

Huge Capacity
Another great feature of the iClear 30 is the large 3ml chamber for holding e-liquid. This means vapers can vape longer between fills, uninterrupted.

Rotatable Mouth Piece
The iClear 30 utilizes a rotatable mouth piece with an innovative 360 degree rotating design. These mouth pieces are designed to swivel around, providing a more comfortable and enjoyable vape!

WHERE:  http://www.akavapers.com/

$9.98

 

IN STOCK: Chrome Vamo Version 2 Deal – $35.58

…its Exhalvapers

Its simple.

The lowest IN STOCK deal I have ever seen on a vamo.   If you don’t have one – get one – now is the time. This IS NOT a pre order.. they are ready to ship.

Chrome
Black Chrome +$2.00
Stainless +11.00

WHERE: http://www.exhalevapors.com

THE DEAL:
 

Use coupon code VaporJoes11Percent to bring the total cost down to $35.58

SIZZLE: Innokin iTaste MVP Kit – $49.00

…its Akavapers


Its been a while since I had a deal on the MVP.   These are one of my favorite mods and the people over at Avavapers have a great deal!  Built like a rock – and very functional!  For $49.00 your getting the complete kit in your choice of color.  

I use mine everyday and it has never failed me.  The battery lasts me almost 2 days between chargers.



THE HARD COPY:


Here’s some specs:

    Variable Voltage from 3.3 to 5.0 Volts
    Max Amperage of 3.0 amps
    Built In Li-Ion 2600 mAh rechargable battery
    Passthrough Charging via Mini USB
    Output USB – to charge other devices (like your dying cell phone)
    Built In Over Discharge Protection

 What’s included with the kit:

    iTaste MVP Device
    USB Charger (You can use any USB/Micro USB charger)
    2 x iClear 16 Dual Coil Clearomizers

WHERE: http://www.akavapers.com/


$49.00 

HOT: Smoktech VV Gripper – $25.99

….its S&Smods

Here is a fantastic deal on the smoktech VV gripper.   These were the precurser to the Groove.  These are variable voltage up to 6v and use a single 18650.  These use a easy to read backlit screen – and hit very very hard.  This is a great backup or primary VV mod.

THE HARD COPY: 

  It is designed as a low cost variable voltage Mod for those who can’t afford to buy Provari or Vmax. Our VV Gripper has a regulated output which keeps your selected voltage the same with each puff regardless of your remaining battery power. As the battery drains, the VV Gripper will keep the voltage consistent giving you the perfect vapor throughout the day. VV Gripper can be adjusted from 3.0-6.0V volts in 0.1 volt increments. It holds only one protected battery 18650 2200mah,allows 5V input voltage limit. VV Gripper PCB allows 4 Amperage output limit. VV Gripper standard load is 3Ω,it also could be working at 1.5Ω. Available Function Voltage down Voltage up Standby on/off Display on/off Atomizer ohm checking

WHERE:  http://www.sandsmods.com/

$25.99