Uncategorized

KAYFUN KILLA: THE ORCHID STYLE GRAVITY FED TANK – $18.32

http://myurl.co/orchid

Here’s a great deal on the Orchid styled gravity-fed rebuildable atomizer. With similar function to the kayfun styles, the Orchid features an ideal setup for dual coils, with four channels to feed juice to your thirsty build. More juice, more vapor, more flavor! Attractive styling and a durable PMMA tank make it a great looking atty for your setup.

THE HARD COPY:

  • Compatible with 510 drip tip (drip tip sold separately)
  • Quad-pole for dual coil build
  • 4 wick channels
  • 2 air holes
  • 510 connection (brass contact)
  • Laser engravings on the chimney


WHERE: >> HERE <<

$18.32

FROM THE USA: THE CLOUPER 150 WATT BOX MOD $110.19

A rebuilders dream!

Single, Dual, or Quad coil setup
In Copper or Stainless steel
Unique design with no negative posts, the entire outside of the atty is the negative ‘post’. Wires are secured by a removable stainless steel ring. Delrin insulated drip tip with stainless steel accent and unique side venting to prevent spit back and create a vortex inside of the cap. Adjustable air control and direction flow outer cap. By lining up the different configurations, it can produce 1,2 or 4 adjustable sized vent holes depending on your build. 
 
THE HARD COPY:
  • Removable top cap for easy access to wicks
  • Air fin cooled top cap to reduce heat
  • Adjustable air control and direction flow outer cap. By lining up different hole configurations, it can produce 1, 2, or 4 adjustable sized vent holes depending on your build
  • Entire outside of atty is negative post. Wires are secure by removable stainless steel ring
  • Deep juice well (approx. 4.1mm)
  • PE 510 drip tip with stainless steel accent
  • Unique side vented drip tip to prevent spit back from coils and create vortex inside of cap
  • Conical internal top to enhance flavor
  • Stainless steel center post
  • Copper 510 center pin
  • 22mm diameter
  • Height without drip tip: 31.2mm

 

 
CHINA ($11.49):  >> HERE <<
 
USA ($15.99 SS ONLY): >> HERE <<

MORE POWA: CHINAS 180 WATT / TRI 18650 BOX MOD

Seems China is pushing the limits on wattage everyday.  We just announced a 150 watt box mod coming from Clouper, and now this.   This box mod will hit a maximum of 180 watts and uses three 18650 batteries.   Its unknown what chip-set they are using – but when its released you know people will be putting to the test to make sure its accurate. 

In terms of looks – I think its smart.

CHECK IT OUT:  >> HERE <<

DOMINATE: PERSEUS 26650 GENNY TANK – $22.64

Been waiting for a hot genny-style atomizer to fit your 26650 mods? Here it is. It’s the Perseus styled rebuildable tank atomizer, and it will look dynamite atop any setup. A glass 3 ml tank feeds a two wick setup with smaller fill hole in the deck. The positive post has its drilled post connection near the deck and the two drilled negative posts, have their holes drilled higher. The tank is protected by a steel sleeve with cutouts and the three part cap features an adjustable airflow, and the matched drip tip is included. Constructed of stainless steel with a sand=blasted finish and polished accents.

Comes with two pre-coiled silica wicks, two stainless steel rope wicks, spare o-rings, and a building guide (referred to as the “blanking pin” allowing you to create perfectly sized and shaped coils without the need to raid your drill bit collection.

THE HARD COPY:

  • Stainless steel 510 drip tip
  • Sliding air flow adjustable, 2 air holes or 4 air holes option
  • Top refill
  • Triple posts design, stainless steel posts with Phillips head screws
  • Two wick holes
  • 3.0ml juice capacity
  • Glass tank with stainless steel sleeve
  • 510 threading connection
  • 29.5mm external diameter
  • Height without drip tip: 48.5mm
  • Laser engravings

 

WHERE: >> HERE <<
$22.64
 

PROJECT SUBOHM: COMPETITION RDA BY CONGREVAPE – $26.99

http://www.vapordna.com/ProductDetails.asp?ProductCode=PSD010&Click=98
Two USA Companies; One Common Goal: To Bring Innovation, Originality, Affordability, and Functionality to the vaping community! Project Sub-Ohm™ X Congrevape Are Proud to Bring You A True Ultra Affordable Cloud Chasing Machine: The Competition Doge RDA Project Sub-Ohm™ Edition! This RDA is designed from ground up to have sufficient juice delivery, high conductivity, and outrageously large airflow system. The huge cloud produced from this RDA is something you need to experience to understand! Are you ready for the ultimate cloud chasing experience?

Competition Doge by Project Sub-Ohm™ X Congrevape

Designed from ground up, the Competition Doge RDA is an all US Designed RDA, features massive dual cyclops airflow channels, you will never be hurting for more airflow again!

Product Features:

  • Adjustable Airflow holes are 11mm wide, that is the biggest airflow we have seen on an RDA!
  • The Deck has no airflow restrictions
  • Negative Posts are milled to the base so you are getting the maximum conductivity and durability
  • 8 Cooling Fins: We believe 8 Fins are the perfect layers to cool down even some of the hottest vape
  • Interchangeable components with many other popular 22mm Atomizers
  • Huge Post Holes to fit some of the thickest wires
  • Conical Designed Top Cap to create that perfect flavor
  • Beautifully Engraved with Project Sub-Ohm™ Logo and “WOW” on the bottom of the RDA
  • Copper bottom center pin only for maximum conductivity
  • Thick screws for ease of build
  • Deep Juice Well
  • 3 Piece Design
  • Serialized for that personal touch
  • Matches All Other Project Sub-Ohm Products
  • Original & Affordable
  • Designed In USA
  • Presented to you by Project Sub-Ohm™ X Congrevape

WHERE: >> HERE <<

USE COUPON CODE JOE10 TO BRING THE TOTAL TO $26.99

IN COLOR: THE TUGBOAT GETS A PAINT JOB – $8.98

http://www.vaportekusa.com/tug-boats-sea-of-colors/#oid=1002_100
The tugboat is a solid, tried, and true rebuildable atomizer.  Now in super sexy new colors!
 
I have been a huge fan of the Tugboat RDA.  I’m also a huge fan of cheap prices.   This is a match made in heaven.   The Tugboat is a fantastic dual coil dripper that is built solid.  Out of all the three post drippers I own the Tugboat is my favorite.  Matching engraved and insulated drip tip included.  

THE HARD COPY:

  • 510 drip tip (with heat insulator)
  • 2 air holes
  • Deep juice well (approximately 4.5mm deep)
  • Tri-post design
  • Stainless steel posts
  • Copper 510 center pin
  • 22mm external diameter
  • Height without drip tip: 31mm
  • Laser engravings

WHERE: >> HERE <<

USA DEAL: FOGGER VERSION 4.1 – BLACK OR SILVER – $28 + FREE SHIPPING

http://bit.ly/1tHhWyC
 
The Fogger version 4.1 is now being offered at a fantastic price!
These have improved airflow control and copper center pins for better conductivity.

Fantastic price!


FEATURES:
  • 22mm diameter
  • Dual coil setting configuration
  • Bottom feeding mechanism
  • 4ml volume capacity
  • Threading top cap , easy to assemble/disassemble
  • Air flow control ring
  • Etched logo on top cap and laser printed on the chimney
  • Adjustable bottom pin
  • 510 thread
  • Bottom juice filling

WHERE:  >> HERE <<

 

$28.00 + FREE SHIPPING
SHIPS FROM THE USA!
 

FINAL DAYS: LOW PRICE NIC BASE – $50.00

http://shrsl.com/?~65ao
We are in the FINAL days of this sale!  It goes until Aug 31st.

Today this vendor is having a an epic sale on 100mg nic base.  
I have used them in the past – its very very clean! 

For someone like me I can turn this into 16 LITERS  ( 540 30ml bottles ) of juice at my nic level.  
Impressive for a very small investment.

This is a great opportunity to ensure you have a supply for any issues that may arise.

Great for mom and pop juice companies too!

This is 100% flavorless nicotine base.  
All you need to do is cut it to your desired mg level, add flavoring to taste.

I keep my nic in the freezer to extend its shelf life.


THE HARD COPY:

Our famous Unflavored Nicotine “Smoke Juice” E-Liquid is made with the highest grade nicotine available.  Buy with confidence knowing that you are getting the very best nicotine available and that it is always distilled from actual tobacco leaves not synthetically produced.  For more information read below and click the link to see our latest batch testing results.

WHERE: >> HERE <<

KATO MECHANICAL BOX MOD – $47.49

http://myurl.co/katobox
Been on the fence about the Kato Square Box styled mechanical mod? Then it’s time to jump off, and grab one! This is the lowest we’ve seen them so far, and by a long shot. 

It’s a very attractive mechanical 18650 box mod with a top firing button that locks. Body is brushed aluminum, frame and accents are stainless steel. The ring houses an atomizer down inside the profile of the mod, so it’s a compact, clever setup…. and yes, to give you an idea of size, a Kayfun style fits nicely.

THE HARD COPY:

  • Polished stainless steel top frame + bottom frame
  • Brushed aluminum body
  • Brass contacts
  • Spring-loaded firing button, the locking ring is NOT reverse-threaded
  • 510 connection
  • The ring on top frame is 23.4mm in inner diameter
  • Houses single 18650 battery (battery sold separately)
  • With logo engravings

WHERE: >> HERE <<

$47.49

USA DEAL: CERAMIC TWEEZERS – $10.99

NOW AT A NEW LOWER PRICE FROM THE USA!

The photo above is what inspired me to start looking into these.  You see what they are doing?  Making a micro coil right deck of the rebuildable – by firing the PV.  Since the tweezers are heat resistant (ceramic) it gives the user a whole new way to rebuild with ease.

If you rebuild – you need these.


WHERE: >> HERE <<

$10.99

EFEST BATTERY BLOWOUT: ALL SHAPES AND SIZES – FREE SHIPPING

http://bit.ly/VNX1wo
This merchant is having an EFEST battery blowout!   All shapes and sizes.  You can also choose button or flat top.  All batteries come with free shipping!  Almost 1000 sold already!

THE HARD COPY:

The 18650’s are 35A!
The 18500’s are 15A!
The 18350’s are 10.5A!

Prices range from $5.49 to $9.50 with free shipping.
 
Ships from the USA!
 
WHERE: >> HERE <<
 

THE ANARCHIST COPPER MECHNANICAL MOD – $20.52

http://myurl.co/anarchy

 

http://myurl.co/anarchy
The anarchist style mechanical is simple and elegant with an attitude problem!

A full copper body with stainless steel accents.   

The brass bottom button has a large laser etched anarchy symbol.  
The laser etched logo goes around the band of the mod.

In the cart it went for me!


THE HARD COPY:

  • Stainless steel top cap + bottom cap
  • Copper tube
  • 510 connection
  • Copper contacts
  • Adjustable positive contact and insulator
  • Bottom spring-loaded firing button, without lock
  • Firing button material: Brass
  • Laser engravings
  • 18.9mm internal diameter
  • 22mm external diameter
  • Houses single 18650 battery (battery sold separately)
WHERE: >> HERE <<

$20.52

VAMO V3 KIT w/ BATTERIES / CHARGER / CASE / TANKS – $34.65 + FS!

http://myurl.co/vamokit3
Everything you need at an INSANE PRICE!

The Vamo V3 is the latest version of the popular V2 version. Rather than a LED screen, the Vamo V3 comes with an OLED screen. Additionally, the Vamo v3 has a wider drip well, enabling you to use Kanger MT3 and T3 clearomizers, etc.
Kit Includes:

  • 1x V3 Body
  • 2x Clearomizers
  • 2x 18350 batteries
  • 1x Charger
  • 1x U.S. plug adapter
  • 1x user guide
  • 1X zipper case

The V3 is both variable voltage and variable wattage. This means you can adjust the “vape” to be consistent, regardless of the clearomizer, atomizer, or cartomizer you use. Unlike the V2…the V3 will work with most clearomizers, cartomizers, and, tanks with and eGo or 510 connection. The new design is NOT a finger print magnet like the previous version. The grooved design definitely helps to aid your grip.

WHERE: >> HERE << 

USE COUPON CODE YEAHBABY TO BRING THE TOTAL TO $34.65
FREE SHIPPING – SHIPPED FROM THE USA

BAD ASS: THE GREEN VIPSTER VAPE JIG – $15.99 FREE SHIPPING

http://bit.ly/1wzDkJM

I don’t know about you but I think this Jig looks bad ass.  A Jig with an attitude problem!
This tool will assist in your coil building, wrap different diameter coils with the included posts.


Tobeco Coil Jig Features:

  • 3/64; 1/16; 3/32; 1/8; and 9/64 posts for building coils
  • 510 threading on the side of Jig to use as an Atomizer stand
  • Nylon thumb screws
  • Built in Compartment to store building posts 

WHERE: >> HERE <<

$15.99 + FREE SHIPPING

A LEGEND: THE VAPING COMMUNITY LOSES A DEAR FRIEND

Photo courtesy of Phil Busardo
This morning I woke up to terrible news.

Opus D I picked up a year ago

Today the vaping community loses a dear friend and a legend.   Drew the owner Nhaler.com passed away at 7:15am this morning.

A pioneer in the industry Drew and Nhaler.com were a driving force. Introducing mods like The Darwin, original Opus, The Curve, and the very sought after Opus D DNA20 / DNA30.

Even in my early days as a vaper this man was a veteran – one of the originals who lit the fire that started the explosion we see today in the industry.

We met many times at National events and he would always be willing to sit down and talk about the “goings on” in the industry. 

We owe this man a lot.   

My thoughts and prayers go out his family.

The cause of death has not been made public at this time.


UPDATE 9:20PM

SERVICES:
 
12-3PM EST Saturday Aug 30th
Clayton & McGirr Funeral Home 100 Elton Adelphia Rd. Freehold, NJ 07728