Uncategorized

USA DEAL: THE CHIYOU MEGAN MECHANICAL – $21.99 FREE SHIPPING

http://shrsl.com/?~68j7

It’s everything you love about the Chi You styles, but this time in a 26650 format. Constructed of stainless steel with brass accents, it features a recessed bottom firing switch and an adjustable positive pin.

THE HARD COPY:

  • Battery Size: 26650
  • Polished Stainless Steel and Brass Mixed
  • Includes 2 styles of top caps
  • Recessed button
  • Auto adjusting top contact
  • Immaculate Engraving

WHERE: >> HERE <<

$21.99
FREE SHIPPING – SHIPS FROM THE USA

FOUR FLAVORS OF THE TUGBOAT RDA – $12.99 + FS

I have been a huge fan of the Tugboat RDA.  I’m also a huge fan of cheap prices.   This is a match made in heaven.   The Tugboat is a fantastic dual coil dripper that is built solid.  Out of all the three post drippers I own the Tugboat is my favorite.  Matching engraved and insulated drip tip included.  


THE HARD COPY:

  • 510 drip tip (with heat insulator)
  • 2 air holes
  • Deep juice well (approximately 4.5mm deep)
  • Tri-post design
  • Stainless steel posts
  • Copper 510 center pin
  • 22mm external diameter
  • Height without drip tip: 31mm
  • Laser engravings
WHERE: >> HERE <<

$12.99 + FREE SHIPPING

ROLLOUT: THE STINGRAY X IN BLACK PVD – $26.56

http://shrsl.com/?~68bv


The Stingray X has a new look. 

Now in copper, silver, and black PVD – its a super sexy mod!

The black PVD really brings out everything and makes it pop.

THE HARD COPY:

  • 510 threading connection
  • Copper body wrapped with black plated stainless steel
  • Copper top cap wrapped with stainless steel with floating pin and vent holes
  • Bottom magnetic firing button, the locking ring is NOT reverse-threaded
  • Locking ring material: Polished stainless steel
  • Silver plated copper contacts
  • Comes with a hybrid adapter and a 510 drip tip
  • Houses single 18650/18500/18350 battery (batteries sold separately)
  • 22mm external diameter
  • 18.4mm internal diameter

WHERE: >> HERE <<

$26.56

RESTOCKED: THE CHDNA30 CHIP NOW FOR SALE – $24.78

http://myurl.co/chdna30


It has finally landed.  The CHDNA30 – 30watt board.    This is VERY significant because now mod makers have the ability to get a hold of chips at a great price AND they are AVAILABLE.  Every vaper now has access to this tech at an extremely reasonable price.  There is no reason we cant see a 30 watt box mod under $99.00 from an American mod maker.

I see a lot more home made mods in the future.  A lot more mod makers. 

These also come in the 20 watt version, but for $2.00 more your getting the 30 watt version.

THE HARD COPY:

  • Variable Wattage from 7W-30W in .1 watt increment
  • OLED display shows battery charge state, volts and ohms
  • Micro-USB charging port
  • Compatible with 0.5ohm~3.3ohm atomizers
  • Input voltage/current: 3.2-4.3V/1.5-7A
  • Output voltage/current: 4-8V/10A

WHERE: >> HERE <<

$24.78

MORE POWER: LG 35AMP / 2500mAh 18650 BATTERIES – $9.49


One of the highest amp rating on the market. By a solid company known for battery technology.

These are monster batteries. These 18650s have a 35-amp continuous discharging rate, which is perfect for sub-ohm builds. With a mAh rating of 2500mAh, these will outlast and outperform any other battery on the market. These are hybrid batteries, combining the battery life of an ICR with the safety and amp-limit of an IMR. These cells have also been proven to reduce voltage drop, meaning that just by using these batteries, your mechanical mod will hit harder, and output more voltage. And with 2500mAh, your mod will continue to perform optimally for hours. If you’re a mechanical mod user, these are the best batteries you can use.
Specifications:

Manufacturer: LG
Model: LE DGHR 2185
Maximum Continuous Discharging Current: 35A
Rated Capacity: 2500mAh
Nominal Voltage: 3.7V
Maximum Charged Voltage: 4.25V
Minimum Discharge Voltage: 2.5V

WHERE: >> HERE <<

USE COUPON CODE ECF5OFF TO BRING THE TOTAL TO $9.49 EA

THE KAYFUN KILLER: ORCHID RBA REPLICA – $19.95 + FREE SHIPPING

The Evil Clone empire has been working overtime!
 
Is your Kayfun just not doing it for you anymore? This incredible, new RBA is bringing that Kayfun/Fogger-style design to a whole new level. It features a large build deck that accommodates dual coils, large air-holes, and holds approximately 4ml of juice!
Logo-less design
THE HARD COPY:
  • True Kayfun/Russian styled RBA on the market today
  • Larger Chimney allows more vapor to travel
  • 4 juice tunnels for efficient juice delivery
  • 2 huge air holes on each side for easy lung inhale
  • Ultra detailed laser engraving technology
  • Over 4ml of Juice Capacity
  • One of the Best Atomizer that gets both cloud and flavor
  • No more dripping on the go!

WHERE: >> HERE <<

$19.95 + FREE SHIPPING

LOWEST: THE PLUME VEIL REPLICA – $11.19

http://shrsl.com/?~65o0
Well it was only a matter of time.   The Plume Veil RDA replica has been making its rounds for the last month all over Facebook and eBay.   Today it drops at an incredibly low price.  At about $2.00 over cost – your not going to find it cheaper.


THE HARD COPY:

  • Stainless steel construction
  • Removable 510 drip tip
  • Unique design with three separate sources for airflow:
    • Air Slots in front of coil, with AFC
    • Air holes through negative posts to bring air to back side of coil
    • Air holes in top of cap to create a vacuum effect
  • Negative posts are milled into the deck
  • Deck is gold plated stainless steel
  • Delrin insulator at drip tip (also serves as AFC for top air holes)
  • Rotating “T” center post to accommodate a multitude of different builds
  • Post holes size: approximately 1.7mm
  • 22mm external diameter
  • Height without drip tip: 29.5mm
  • Laser engravings
  • 510 threading connection

WHERE: >> HERE <<

$11.19

BETTER IN BLACK: THE FAT SNOW WOLF – $25.83

http://shrsl.com/?~681g
The 26650 Fat Snow Wolf replica is a massive mod.  Black PVD and copper accents make this mod very attractive.  If your looking for a beefy  mod – look no further.   The price for this very large mod is very reasonable at just $25.83

THE HARD COPY:

  • Stainless steel construction with black + copper plated finish
  • 510 connection
  • Brass contacts
  • Contact on the top cap is adjustable to both directions
  • Bottom spring-loaded firing button, with reverse-threaded locking ring
  • Houses single 26650 battery (battery sold separately)
  • 27mm internal diameter
  • 30mm external diameter

 

WHERE: >> HERE <<
$25.83

GET WIRED: 16 TO 34 GAUGE KANTHAL WIRE – 25 TO 1000 FEET

OVER 21,000 UNITS SOLD!  
WHY BUY YOUR WIRE ANYWHERE ELSE??

Here it is.  Your one stop shop for gauges and lengths of the most popular gauge wire.   This merchant has been promoted by me time and time again for their great service.  Time to load up at great prices.

THE HARD COPY:

Ships with Tracking within 1 business day!
  • Heat Resistant up to 1400-1500 degrees Celsius
  • Check Pictures for resistance chart for each gauge
  • Shape: Round
  • Requires Oxidizing


WHERE:  >> HERE <<

FLASH: EFEST 26650 32A / 64A BATTERIES – $10.50- FREE SHIPPING

http://bit.ly/1ow3rgf

Hot off the press we have the brand new Efest 26650.   These are the latest incarnation of their 26650 line – now packing a 64A pulse and 32A continues discharge rate.   These are making huge waves in the vaping community – now at a great price!



THE HARD COPY:

  • Weight: 100g
  • Length: 65.11 mm
  • Diamter: 26.22mm
  • Top: flat top
  • Bottom:non-procted
  • Typical Capacity: 3500mAh
  • Min capacity: 3500mAh
  • Maximum discharging current: 32A
  • Maximum charging current: 6.5 A
  • Maximum pulse discharging current: 64A
  • Resistance: 13±2 mOhm
  • Battery WH: 125WH\Kg
  • Discharge cut-off voltage: 2.5V
  • Voltage: 3.8V
  • Full Charge voltage: 4.2V
  • Monthly Self-discharge rate:
  • Temperature range: Discharge: -20~+60 ºC, Charge: 0~45 ºC

WHERE: >> HERE <<

$10.50 + FREE SHIPPING

REPLICATED: THE ANATOLAIN COPPER MECHANICAL – $23.89

http://shrsl.com/?~67rn

Another simple and elegant copper mechanical.  This mechanical has silver accents and silver plated connections for little voltage loss.  The mod itself is CNC milled and comes in at a fantastic price of just $23.89.

THE HARD COPY:

  • 510 threading connection
  • Silver plated brass battery contacts (adjustable positive contact)
  • Bottom spring-loaded firing button, without lock
  • CNC engravings
  • 19mm internal diameter
  • 22mm external diameter
  • Houses single 18650 battery (battery sold separately)
WHERE: >> HERE <<
$23.89

IN STOCK: THE IPV V2 – 50 WATT BOX MOD – $99.00

http://myurl.co/ipv2
These have been selling out everywhere.   I own one, they rock! 

The price of $99.00 will show up when you add it to your cart.  No coupon code needed.

THE HARD COPY:
 
The iPV V2 is a powerhouse of a box mod and simply amazing.
This variable wattage mod will allow you to fine-tune your vaping experience by adjusting your power from 7W to 50W in increments of 0.1 watts! Able to fire coils at 0.2Ω up to 3.0Ω, this mod is powered by a single IMR 18650 battery and is capable of producing up to 50 watts of power! 

The battery is removable, but can also be charged internally with the included USB to Micro-USB cord. While charging, the IPV V2 acts as a passthrough! The OLED screen is very easy to read, and will tell you your wattage, resistance, output voltage and battery life at a glance, without having to fumble through menus. In addition to the standard firing button on the side, there’s also a “touch plate” sensor next to the 510 connection. This sensor allows the device to be fired just by resting a finger or thumb on it. The iPV V2 has 510 threading, but will accept any 510 to eGo adapter if you’d like to use eGo-threaded atomizers. This mod is made of high-quality anodized aluminum, and provides more than enough power for beginners and veterans alike! Attractively packaged. Comes with micro-usb charging cable, extra cover screws and small screwdriver. Just add you favorite tank, RDA or carto and some e-liquid and you’re ready to roll!

Specifications and Features:
 
Output Power: 7W – 50W
Output Voltage: 3.6V – 8.5V
Input Current: 1.3A – 20A
Input Voltage: 3.2V – 4.5V
Efficiency: 93%
Loading Resistance: 0.2Ω – 3.0Ω
Screen Size: 0.96″ OLED
Low Voltage Protection
Low Resistance Protection
High Input Voltage Warning
Output Short Circuit Protection
Reverse Battery Protection

WHERE: >> HERE <<

$99.00 IN CART

REPLICATED: THE OROS COPPER MECHANICAL MOD – $39.99 FREE SHIPPING

SHIPS FROM THE USA FOR FREE

The Evil clone empire is working overtime.  The legit version of this mod is STILL on pre-order – pretty incredible.   The replica AND legit versions will come out at the same time.  How is this possible??  Must be magic!


THE HARD COPY:

  • Diameter at widest points: 25mm 
  • Diameter at slimmest point: 23mm
  • Perimeter of top cap: 25mm ; Tapers to 22mm
  • Dedicated 18650 assembly
  • Top loading battery access
  • Designed for a very low voltage drop
  • Telescopic 510 pin
  • Magnetic firing button
  • Included tool to remove the button
  • Recessed drip well
  • Locking ring
  • Vent holes in bottom button assembly

WHERE: >> HERE <<

$39.99 + FREE SHIPPING
SHIPS FROM THE USA WAREHOUSE

IT’S #4: HANA SUES YET ANOTHER VENDOR

This time its Vaporcrypt.

This isn’t as vague a reason as the others.  I took a look at Vaporcrypts website and they are selling full out Hana Clones for $120.99 – logo and all.  They don’t even try and hide it.

I have a feeling they don’t know they are being sued yet – because its still being sold on their site.  
Wouldn’t suck to find out your being sued because Vaporjoe told you?

I still think it could have been avoided with a simple phone call. 


MORE INFORMATION:  >> HERE <<

FULL KIT: XXIX MECHANCIAL COPPER SET – $27.61

http://shrsl.com/?~67p4

Simple and elegant this mechanical set is steal!  This mod comes in full copper with a full compliment of tubes.   
The minimalistic nature of the top cap and switch makes this mod a very very attractive piece.   

THE HARD COPY:

  • 1:1 clone
  • Copper construction
  • Without 510 center pin, so your atomizer will connect directly to the positive pole of the battery
  • Custom hybrid connection on the top, when you connect any atty to the mod it gives a hybrid look
  • Bottom spring-loaded firing switch, without lock
  • 18350 + 18500 + 18650 full set battery tubes
  • With laser engraved logo on each tube
  • We recommend you to use a button top battery with this mod. Flat top batteries may cause the mod to short and ruin the magnet

 

WHERE: >> HERE <<

$27.61