Uncategorized

HIS AND HER DREADNAUT HYBRIDS – $56.39

http://goo.gl/NGYhy7

 

http://goo.gl/NGYhy7

How cute… You can now be “Dreadnaut buddies” with your significant other.  
Now in brand new colors – Black PVD and Rainbow fired.

The Dreadnaut replica is a 26650 hybrid dripper.  An absolute beast of a mod!

Not only a great mod but doubles as a person protection device!

THE HARD COPY:

  • Hybrid 26650 tubular mod
  • 510 drip tip
  • Tri-pole design
  • Air flow control (2 air slits on the AFC ring)
  • Deep juice well
  • Thread connected top cap
  • Has a total of 8 parts
  • Copper positive contact pin
  • Silver plated brass negative contact pin
  • With engraved logo and serial number on the firing button
  • Battery tube outer diameter: 30mm (just the SS tube, exclude the sleeve)
  • Battery tube inner diameter: 27.5mm
WHERE: >> HERE <<

$56.39

EPIC: THE AKUMA REPLICA HITS THE STREETS – $31.56

 

Here we go!  

The Akuma drops at a FANTASTIC price!

It’s constructed of copper with brass accents and copper contacts. The mod comes with all the tubes to be able to use the full compliment of batteries.  The contacts are copper and the bottom switch is magnetic.


THE HARD COPY:

  • Brass top+bottom locking ring
  • Copper tube
  • 510 threading connector
  • Adjustable 510 center pin
  • Copper battery contacts
  • Adjustable positive battery contact
  • Bottom magnetic firing button, with reverse-threaded locking ring
  • Comes with a spring for spring-loaded firing button DIY
  • Houses single 18350/18500/18650 battery (batteries sold separately)
  • With logo engravings
  • 22mm
WHERE: >> HERE <<
$31.56

LEGIT: THE VULCAN RDA + FREE JUICE + FREE SHIPPING – $54.99

http://www.vapordna.com/ProductDetails.asp?ProductCode=VN0001&Click=98
The Vulcan RDA is a three-piece design dripping atomizer that was built from a foundation of functionality and quality: A top and bottom heat fins that make sense! With the bottom base/fin carved out of a single solid piece of stainless steel, heat-dissipation has gone to a whole new level! No more over-heating MODs due to long draws. A unique air-vent and AFC design that brings the vents closer to the coils. Super-deep juice well that under passes the two side posts allowing maximum space utilization. The result is a product of quality you should expect and desire from a Japanese CNC perfectionist Producer.

The Vulcan Atomizer is made with the followings:

  • Full stainless steel
  • Single solid piece construction
  • Revolutionary “under-passing” juice well
  • A truly functional bottom base heat sink
  • Innovative AFC side walls
  • Double Laser cut vent holes
  • Red copper bottom contract pin/screw
  • PEEK insulators
  • 3 sets post screws out of the box
  • Precise machining with unmatched price!
  • Truly a RDA that has both amazing performance and unbelievable price!
  • MADE IN JAPAN!
WHERE:  >> HERE <<
  
USE COUPON CODE JOE5 TO BRING THE TOTAL TO $54.99

BREAKING: THE SIGELEI 100 WATT – SIGELEI TAKING VENDOR ORDERS

There has been talk and rumblings about a new China 100watt box mod.  It seems Sigelei is now letting vendors pre-order them.  Obviously this is a prototype mock-up of the mod but these are bound to be HUGE and a pre-order might be a wise move for a vendor.  

Popular or not — I do caution vapers.  We are dealing with power levels that are completely unnecessary for the average vaper. It can be very dangerous if used incorrectly.  This isn’t your grandmom’s ego twist.

I’m waiting to see this chip tested thoroughly before buying it.   While Sigelei is a good company, It’s still Chinese tech and at these power levels some extra attention should be given.

With that being said – I’m sure this mod will sell like crazy.   Vapers love the newest toys.


WHERE: >> HERE <<


DOMINATE: 30 WATT BOX MODS w/ FREE SHIPPING & JUICE – $71.99

http://shrsl.com/?~61yk

 

These sell out every time I put them up.   As I explained on the Mod Envy show – these are fantastic!
I have eight legit DNA 20 / 30 mods and I see ZERO difference between them and this mod.

The logo-less 30 watts in an aluminum box are now back in stock!  These are ready to ship and NOT a pre-order!  Get on it while they are in stock.   They wont last long! 

  • Compact size ~ 3.1″ x 2.1″ x 1″ Aluminum body
  • Custom milled display screen with a flush fit to the outside of the box
  • Flush 510 connector
  • Flush dome style Fire Button
  • 7 – 30 watts
  • 4 – 8.3 volts
  • 0.3 – 3.3Ω Atomizer Resistance
  • On-board USB
  • LED shows Red while charging and Green when fully charged
  • Micro USB charger & dust cover included

WHERE: >> HERE <<

USE COUPON CODE VE10 TO BRING THE TOTAL TO $71.99
FREE SHIPPING + FREE JUICE WITH ORDERS OVER $15.00
 

WICKING: COTTON BACON BY WICK ‘N’ VAPE – $5.99

http://shrsl.com/?~61wd
No boiling necessary, just pinch, rip, wick, and vape! 

This is the slogan of this new style of cotton thats being marketed as the cleanest cotton you can buy.   I have been hearing a lot about this and this merchant has it at a price thats right for any vaper that uses cotton or wants to try cotton.

Its called “Cotton Bacon” because it comes in strips – making it much easier to form a wick.

THE HARD COPY:

Cotton Bacon is the cleanest, best tasting cotton on the market for vaping. It is made by vapers for vapers. This cotton does not add any unwanted flavor to your vape and it wicks incredibly well. Cotton Bacon comes in thin strips so it is virtually hassle free.

Watch the video on their page for the review.

WHERE: >> HERE <<

$5.99

DIY: DNA30 BOX MOD ENCLOSURE w/ WIRES – $20.14

Just add a chip and your on your way!

This comes with everything you need to make your own home made DNA30 box mod.   If you already have an Evolv DNA30/20 board you can make yourself a legit for a fraction of the cost.  If you don’t have an Evolv board and want to opt for the CHDNA board you can buy that from the link provided below.

Lots of possibilities!   You wrap them, logo them, do what you want! 

Lots of different colors to choose from.

WHERE: >> HERE << 

CHDNA 30 BOARD: >> HERE <<

PANZER ATTACK: THE KILLER RDA – $10.68

It’s a hot looking dripper! We’re talking about the Panzer RDA. With the familiar styling of the Panzer, it’s the perfect RDA to complement that mod, or many others. Three drilled posts make various builds a snap, and the deep juice well will keep thirsty coils well fed. 

The OSO styled two-part drip tip is included.

THE HARD COPY:

  • Stainless steel + PMMA 510 drip tip. It is a two-piece drip tip, you can connect them together or use them on their own
  • Air flow adjustable (2 air holes)
  • Deep drip well
  • Tri-post design
  • Chromed brass posts and 510 contact pin
  • Height without drip tip: 33.4mm
  • 510 connector
  • With logo engraving

 

WHERE: >> HERE <<
 
$10.68

RESTOCKED: PANASONICS CGR26650A – 50AMP 26650 – TWO FOR $24.95

http://bit.ly/1mLN5cu

Get them while you can!  The sell out quick!

The Panasonic CGR26650A.   I did some poking around and they seem to have the same exact specs as the SONY 50AMP batteries that have been discontinued.  These run at 2500mAh and have a 50AMP max amp limit.   These could be the new baby of the 26650 mod world – Panasonic has always made great cells.

WHERE: >> HERE <<


$24.95 FOR TWO + FREE SHIPPING

BEAST: THE GAIA STYLE MECHANICAL – $32.42

The Gaia Styled Mechanical is a very attractive mod with a magnetic bottom switch with reverse threaded locking ring to prevent accidental firing. Contacts are silver-plated brass and the positive pin is adjustable. The detailing is terrific on this one, and we’re pretty excited about it. Mod is constructed of copper and all tubes are included to house a single 18350/18500/18650 battery.

THE HARD COPY:

  • 510 threading connection
  • Silver plated brass battery contacts
  • Adjustable positive contact pin
  • 3 air holes on the tube
  • Magnetic bottom firing button, with reverse threaded locking ring
  • Laser engravings
  • Houses single 18350/18500/18650 battery (batteries sold separately)

 

 
WHERE: >> HERE <<
 
$32.42

VAMPED: THE 40 AMP 18650 – MARKETED DIRECTLY TO VAPERS – $9.99

 

The newest 18650 going is called “Vamped”.  Being pushed heavily by Vapor Hub as being the first 40 amp 18650 on the market.   This is also the first 18650 marketed directly at vapors with its “vapor cells” wrapper.  101 is rolling them out at a good price. 

WHERE: >> HERE <<

$9.99 EA

REPLICATED: THE TUGBOAT RDA – $11.99

 http://www.pimped.info/click/click.php?id=308


 

An EPIC deal!

The Tugboat is one of my favorite RBA’s.   I have legit versions and they are FANTASTIC!

This is a clone of the Tug Boat RDA.  If you know the authentic Tug Boat you know it hits like a freight train. This will be a 1:1 clone of the authentic and being offered at a much deeper discount! Check out the different finishes that we have ordered! Here are the specs for the Tug Boat RDA clone:

THE HARD COPY:

-Comes with stainless steel drip tip with delrin base
-Matching serial number on drip tip and atty
-304 stainless steel
-tripost
-Extra deep juice well
-Reduced chamber
-2 Pre-drilled holes 3/32
-Laser etched engraving


WHERE: >> HERE <<

THE PUNISHER: UPGRADE YOUR KAYFUN WITH THESE NEW ITEMS

Love your Kayfuns?  Want to give the one you already own an upgrade to a large 30mm design? Look no further.  Just put the guts of your Kayfun Lite or ES 2.1 in this housing and your good too go.  A great little upgrade for those looking for the Kayfun in a 26650 size.

WHERE: >> HERE <<

$10.61

Here is a little bonus I found when looking around day.    If you love your comic books — you know what that symbol is.  That’s right its the Punisher logo. This is a replacement chimney base for your kayfun — a little cosmetic upgrade.   A great little “gimme” for just about $1.75.  In the cart it went for me!

WHERE: >> HERE <<

$1.78

A STEAL: IGO-W RDA – $9.71 + FREE SHIPPING FROM THE USA

IGO-W RBA

A great deal from a USA vendor!

The IGO-W is a tried a true dual coil rebuildable.  This RBA is made of stainless steel, has three posts, and 2 air holes.   The posts can be set up in a single or dual coil build.  This price is pretty incredible.  


THE HARD COPY.

 

  • Drip Atomizer
  • Sealed battery connector
  • 2 Air-holes located on outer casing (see images)
  • 510 Threaded
  • Two Philips head screws for positive/negative post
  • Extra post for Single or Dual Coil configuration
  • Rebuild using fiberglass or silica rope and wire
  • Stainless steel body and base
  • Fits most 510 drip tips
  • Wick and wire sold separately

 


WHERE: >>> HERE <<<



USE COUPON CODE YEAHBABY TO BRING THE TOTAL TO  $9.71
FREE SHIPPING

THE APO DRIPPER IN COPPER OR GOLD – $11.40

http://www.vaportekusa.com/apo-rda-clone/#oid=1002_86
The APO dripper!  Most places are selling these for around $25.00+ – today you get them for under $12.00.  Here are the specs for this copper and stainless RDA. We are the first to offer this beautiful product and a reduced price! Here are the specs for this device.  A very inexpensive dripper to match those copper and brass devices!

  • 22mm diameter
  • Silver plated positive pin
  • Tri pole with juice well
  • Dual Cyclops air holes 2mm and 1.5mm
  • High temperature insulator
  • Copper airflow control ring
WHERE: >> HERE <<

USE COUPON CODE 5OFF TO BRING THE TOTAL TO $11.40