Uncategorized

THE YEAR OF THE 26650: THE BIG NASTY – AN EXAMPLE OF HOW ITS DONE!

I didn’t want to pimp this until I actually bought it.  As I predicted this would be the year of the 26650 and the Big Nasty is a prime example of what the community has been waiting for.  The Big Nasty goes a step beyond.  In terms of an American made mechanical, its at a reasonable price.  We have seen mod makers charge twice as much for essentially a battery tube with some cake decorating on it.  Thus, the clones have taken over and many mod makers are having a hard time selling their once prized products.

The Big nasty is a rock solid mechanical, has a beefy magnetic switch, and little voltage loss.   Mix that with a 26650 design and a high amp 26650  – and you will tickle even the most skeptical sub-ohmer in their “nono” spot.

In terms of size the Big Nasty is 38mm wide but is shorter than the 18650 Poldiac. 
Its girth tapers nicely at the top to complete the 23mm finish.    A thing of beauty.

The mod with my VA Kraken on top

 

If your looking for a quality mechanical – you HAVE to check out the big nasty.   
I applaud Cigtechs for bringing this to market – It’s exactly how I would have done it.

.. now if we could only get a 32650 mechanical 😉

2nd round ships Jan 30th – get in before they sell out again.

WHERE: >>> HERE <<<

BEDAZZLED: 1100mAH EGO IFEEL v2 KITS – $14.99 SHIPPED (USA)

So the guys from AtoZvaporworld hit me up with a great deal on ego start kits.   These are all bedazzled and come with a clearomizer, charger, and a case.  Each battery is 1100mAh so it should last the average vaper most of the day on a single charge.   At $14.99 shipped – its a great deal!  These are China prices here in America.

THE HARD COPY:

eGo iFeel V2 1100mah Kit – Ladies, who doesn’t like to have a little bling in their purse for a night out on the town? Something compact yet sassy. Our premium crystal ego style batteries are just what you are looking for. With 8 different styles you can pick the color that shows your personality. These high quality ego style batteries are as familiar as your traditional eGo pen styles. With 5 clicks on and 5 clicks off function and an ego battery connector you can make your vape statement and show of your vape style without having to familiarize yourself with a new device. Reliable, elegant and easy enough for even a beginning vaper to use and show their individuality. 

This kit comes in a variety of stunning styles. Complete witjh a small zipper carry case, your mod, a CE5 Clearomizer (that can accomdate replacement wicks) and a charging cable.  Be sure to look at all the pics as we have matched up the kits for you. But as you know, A to Z Vapor World will customize and do anything for the #AtoZArmy. If the case isnt the color you want or the clearomizer isnt the color you want dont worry we have you covered. Check out the add ons available  or head over to the clearomizer section and go wickless with out great selection of wickless CE5+ clearomizers for this great night out on the town vape kit.

WHERE: >>> HERE <<<

$14.99 SHIPPED

GIVE ME NIPPLES: FLAT TOP BATTERY ADAPTER – $2.49

Here is a neat idea and im surprised no one thought of it until now.   These convert your flat top batteries into nipple tops.   Much safer than magnets which can slide around and cause a short.  So for those PV’s that require nipple tops or you need a bit of length in your battery – check these out.


THE HARD COPY:

Flat Top Battery Adapter


This is an adapter that turns any flat-top battery into a button-top battery. Simply place the adapter on top of your flat-top battery to simulate a button-top. Some devices won’t accept flat-top batteries, so this is a great item to keep around in case you stumble upon one such device. Adds minimal length and resistance to the battery.

WHERE:  >>> HERE <<<

$2.49

GIVING IT AWAY: THE $14.00 STAINLESS STEEL KAYFUN LITE REPLICA

Kayfun Lite Replica

We all know them, we all love them.  Now you can get one under $15.00.  I could understand a chrome plated brass version, but stainless steel?  A crazy bargain!    If you were thinking about trying them or wanted a few extra — Stock up!

THE HARD COPY:

  • Standard 510 drip tip
  • Polycarbonate(PC) tank section
  • Chromed brass 510 contact pin
  • Bottom screw fill-hole 
  • 22mm diameter
  • Pre-assembled coils

WHERE:  >>> HERE <<<

$14.39

DOMINATE: THIS MAKES ALL OTHER CHIPS LOOK LIKE AN EGO ( 100 WATTS )

We have been talking about the wattage boards for a while now.   The people over at grand innovations have been quietly making a Trojan horse.  This chip-set is capable of over 100 watts and has a display system that makes all others look like something from the stone age.   It is absolutely  incredible what this chip / mod is capable of.     We first brought them out on the blog / Mod Envy when they had the 40 watt version – Now the upgraded version is pretty exciting stuff!   Check out their page and see what kind of mod magic is going on over there.  This will rock the community when its mass produced and I’m 150% behind it.

SPECS:


Variable voltage
Variable wattage
80-100 watts
max output 20 amps
max Real-time OHMS checker
Real-time current meter
Real-time Volt meter
Battery level meter S
Sub Ohms capability
Security Lock
Customized Serial number
Thermal Sensor On / Off switch
TFT Display

Micro SD ready
Wallpaper / Screensaver features
Bare / Anodized Aluminum Enclosure
Accepts 2×18650 battery

They are looking to produce 100 units this month.

The case is a bit rough but the chip-set is what I’m interested in.

WHERE: >>> HERE <<<

TURN YOUR OLD PROTANKS INTO A KANGER AEROTANK – $5.99

Not quite sold on the AeroTank itself yet? Well, now you are able to buy the base and attach it to your ProTank, ProTank II, or ProTank 3 (or get a backup for your AeroTank), and see the difference that having an adjustable air flow base can really have. This base gives you the option to be able to control exactly what kind of hit you want to take from your other Kanger tanks; whether it be a tighter or airier draw. In the past, these options were nonexistent, or took much more work to get the desired results. The base weighs in at approximately .5 oz. The diameter is about .73 inches and it measures about .67 inches tall.
 

Compatibility

    The base fits the Protank 1 and 2 while using single coils heads.
    It fits the Protank 3 with dual coils heads.

I bought 5

WHERE:  >>> HERE <<<

$5.99

EGG ON THEIR FACE: AND YOU DOUBTED ME? THE DNA30 IS LIVE

 
Back during Vapercon I broke the story that DNA30 was coming.  Many thought I was either lying or just plain wrong.  As usual, my sources were right and a lot of people have a massive amount of egg on their face.  I was also correct in suggesting that ZEN’s new ZNA was going to be using the DNA30.  Time to make some omelets boys and girls.


ORIGINAL POST FROM NOV 4TH: CAN BE FOUND HERE

ZNA using THE DNA30


THE HARD COPY:


The DNA system lets anyone build Evolv’s revolutionary power regulated technology into their own products. The DNA 30D is a power regulated digital switch-mode DC-DC converter for personal vaporizers. It offers controlled power from 7 to 30 watts, runs from a single lithium cell and includes protective features such as overcurrent, over and undervoltage protection and a thermal shutdown. It features a small OLED display, analog or digital user controls, power adjust lock, onboard buttons and synchronous rectification for maximum battery life and minimal heat generation.
The DNA30D is the same size as the DNA20D.

* Order quantities of 1 or 2 DNA30D’s will ship immediately. Orders quantities of 3 or more DNA30D’s will ship after January 22nd.

Manufacturers please contact us directly for volume orders.

WHERE:  >>> HERE <<<

____

UPDATE (6:30PM): 

A MOD ENVY WORTHY NOTE: TONIGHT ON NAKED IN THE WOODS – ZEN WILL BE A GUEST WITH CIGARBABE AND GIVE A ZNA w/ THE NEW DNA30 AWAY TO A LUCKY WINNER!

CHECK IT OUT @ 10PM EST – http://www.novabroadcasting.org

 

BACK IN STOCK: EFEST 30AMP 18650 – 2100mAh – $8.29

Efest 18650 – 30amp – 2100mAh

The first of the new Efest purple wrap batteries are hitting the market.  High amp with high mAh value – the best of both worlds.  Perfect for those sub-ohm builds.

THE HARD COPY: 

Model: Efest IMR 18650 V3 2100mAh
Size: 18650
Capacity: 2100mAh
Top: Flat top
Weight: 50g
Nominal Capacity: 2100mAh
Nominal Voltage: 3.7v
Discharge temperature range: -10°C—60°C
Charge temperature range: 0°C—40°C

WHERE:  >>> HERE <<<

THE DEAL:
USE COUPON CODE 5OFF TO BRING THE TOTAL TO $8.29

QUAD COIL: THE IGO-W3 STYLE DRIPPER – $7.24

Igo-W Style Rebuildable Atomizer

Here is a fantastic deal on a IGO-W3 style rebuildable atomizer.  These can be set up to run up to 4 coils and have air flow control.    For under $8.00 its a great price. 

THE HARD COPY:

  • Dripping atomizer
  • Stainless steel 510 drip tip
  • Adjustable airflow
  • 5 air holes located on the top cap
  • 5-post system
  • Chromed brass center pin and internal posts
  • Build using silica wick and wire
  • Double o-rings on base
  • Height without drip tip: 30.9mm (Approx.)

WHERE:  >>> HERE <<<

$7.24

ROLLOUT AND BLOWOUT: THE KICK FORCE ADAPTER W/ A KICK – $19.99

Kick Force Adapter w/ a Kick
The Force Kick Adapter

The Force is an external power adapter that turns any mechanical mod into a variable wattage device. It performs exactly the same function as The Kick, but instead of placing it directly on top of your battery, it screws into the 510 connection. The top of The Force unscrews to reveal a modified Kick underneath. To adjust your wattage, unscrew the top of The Force, and use a phillips-head screwdriver to turn the dial on top of The Kick.  The Force will output any wattage between 5 and 12 watts. The Force has 510 and eGo threading, allowing you to use virtually any style of atomizer. This is perfect for all those mechanical mods that are unable to fit an 18650 with The Kick! With The Force, any mechanical mod with a 510 connection, in any battery configuration, can be turned into a variable wattage device! The Force comes included with a Kick already installed. May The Force be with you!

This will work on all mechanicals and unregulated 3.7v mods (i.e. the bolt, silver bullet, etc).

WHERE:  >>> HERE <<<

$19.99

READY TO SHIP: THE TURTLE SHIP REPLICA MECHANICAL – $29.99

The Turtle Ship Replica

One of the most anticipated mechanicals to come in a while.

THE HARD COPY:

The main 18350 tube of the Turtle Ship clone features the signature UVO Korean laser etched engravings on both the front and back side. The Turtle Ship clone is composed of 100% stainless steel and comes with a total of 3 battery tubes to be able to easily change the length of your device and to accommodate an 18350, 18490 or 18650 batteries. 

The Turtle Ship clone mod has a brass atomizer contact pin and a brass bottom firing pin for ultimate conductivity. The white delrin ring on the Turtle Ship clone’s button allows you to adjust the delrin piece upwards/downwards to eliminate any unwanted battery rattle inside the mod. The Turtle Ship clone features a locking ring to allow the mod from any unwanted firing when placing it in your pocket or setting it down on a table. The Turtle Ship clone has a 510 atomizer connection which will fit most atomizer and is 22mm in diameter. 

WHERE: >>> HERE <<<

$29.99

TOP NOTCH: THE 4 BAY LCD BATTERY CHARGER BY EFEST – $28.99

Efest 4 Bay LCD Charger

I have been using two of these now for over a month.  
By far one of the best chargers going – charges your batteries quickly.

Finally the 4 bay version of the LCD battery charger by Efest!  The original 2 bay version was a big success but there was a problem – only 2 bays!  Your getting the 4 bay version for around the same cost as the original 2 bay version.  These charge everything from 10440 to the very large 26650!


THE HARD COPY:

Introducing the brand new Efest 4 Bay LUC Charger.

1. HD mini LCD screen to display precise voltage and battery capacity level.
2. Each charging channel has an independent display of charging status.
3. Automatically adjusts discharge current to charge different size battery.
4. 4 kinds of protection for over-discharging, over-voltage, short-circuit and reverse polarity protection.
5. Automatically stops when battery is fully charged.
6. With DC wide voltage (12-24V) charging mode.


Includes both the power supply and car charger.

WHERE: >>> HERE <<<

$28.99

HOW LOW CAN YA GO: GOLD PLATED PATRIOT REPLICA – $5.73

Gold Plated Patriot Dripper Replica

Can it get any cheaper?

One of the most attractive replica drippers we’ve seen, this new one dubbed the “Chi-Triot” was inspired by the popular Patriot Dripper. It’s constructed of gold plated brass and features a deep drip well with a three post configuration ideal for thirsty dual coil builds. Holes through the posts and phillips screws mean it’s an easy build and won’t have you hunting for allen keys. Drip tip is included.

WHERE: >>> HERE <<<

$5.73 

AIR FLOW: KANGER AEROTANK + 10ML BOTTLE OF JUICE – $22.49

Kanger AreoTank
The Kanger Aerotank with Airflow Control offers the same great features and performance as the Kanger Protank – II but with the introduction of a dual coil atomizer head! It also has adjustable airflow control. Turn the dial on the base to increase or decrease airflow to your preference.

    Adjustable Airflow Control
    Pyrex tank is replaceable
    Glue Free: All parts are replaceable
    Can be fitted with 510 Drip tip
    Replaceable Dual Coil Atomizer Heads 

    Pyrex Glass Tank (Same replacement glass as Protank II and 3)
    Advertised with a 2.5ml capacity
    The Aerotank is 510 Threaded and it will work on 510 thread MOD/APV
    Dimensions: 2-3/16″L x 3/4″D (without drip tip)

Box Contents:

    1 x Kanger Aerotank with Airflow Control (Pyrex tank, top cap, bottom cap and 510 base)
    1 x 510 Drip tip
    1 x Ego Cone Cover
    2 x Dual Coil Atomizer Heads

 
WHERE: >>> HERE <<<

THE DEAL:
USE COUPON CODE JOE10 TO BRING THE TOTAL TO $22.49

INSTRUCTIONS ON HOW TO GET YOUR FREE 10ML:
  
On the payment page, below Order Comments, you can enter your favorite flavor and nicotine level from Millenium Potion Juice line. 

DRIP DRIP DRIP: THE VORTEX – $7.43

The Vortex RBA

We’ve seen a lot of PMMA caps coming out for the drippers lately, but here’s an idea this blogger can actually get excited about! The Vortex features stainless steel construction, but with something special: PMMA windows in the steel cap. Where’s the airhole? It’s in the PMMA, making it ridiculously easy to drill out or even add an additional hole if desired. The positive pin is offset and both connections are thumbscrews for an easy and versatile build. Comes with the drip tip. 

WHERE: >>> HERE <<<

$7.43 + FREE SHIPPING