June 15, 2015

USA DEAL: THE IPV4 100 WATT – TEMP CONTROL BOX MOD – $67.49 + FS


I love this mod.. I own three of them!

The IPV4 is an incredible box mod by Pioneer4You. The IPV4 features an upgraded YIHI SX330v4S chip with 100W capabilities and temperature control! This box mod takes two 18650 batteries, giving you all the power you need, and an all new door held in place by ball bearings to make switching batteries easier than ever. The IPV4 will fire down to 0.1 ohms and will automatically calculate voltage as you adjust the wattage. Batteries for this device must be purchased separately.

Features: 

Output Power: 7 – 100 Watts
Output Temp: 5 – 50 Joules
Output Voltage: 1.0 – 7.0 Volts
Output Current: 35A
Standard Resistance: 0.1 – 3.0 Ohms
Temp Limit: 200 – 580 Fahrenheit
Input Voltage: (Dual Batteries) 6.2 – 8.5 Volts
Input Current: 1.3 – 25 Amps
DC-DC Power Output
USB Update
Slide On Battery Door
0.96″ OLED Display

 This Device Includes:

1 x IVP4 100W Box Mod
1 x charging / data cable


WHERE: >> HERE <<

USE COUPON CODE VAPORJOES TO BRING THE TOTAL TO $67.49

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

SLEEK AND SIMPLE: THE REM RDA – $31.49 + FREE JUICE

The REMentry RDA is the newest rebuildable atomizer by REM Creations, the makers of the REMatty. The REMentry RDA is constructed of a combination of stainless steel and delrin. The deck features a three post design with each post featuring a squared design. The negative posts are milled to the deck and the positive post is reinforced with a squared PEEK insulator. The juice well is a whopping 5mm deep. The deck sits fitted into a colored delrin sink to help keep the atomizer cool. The barrel is a long 20mm barrel with two 5mm by 2mm airflow slots. The REMentry RDA also features a matching delrin 11mm wide bore competition cap with airflow control tabs to adjust airflow control. The REMentry RDA rebuildable atomizer by REM Creations, affordable quality.

Product Features:

  • Three post design with squared shaped posts
  • 22mm in diameter
  • Matching competition cap with airflow tabs
  • PEEK insulators
  • Copper 510 pin
  • Four beautiful and vibrant finishes

WHERE: >> HERE <<

USE COUPON CODE JOE10 TO BRING THE TOTAL TO $31.49

ALL ORDERS GET A FREE 10ML OF MILLENNIUM JUICE

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

STILL KICKEN : THE KANGER KBOX $17.99 USA SHIPPED

 

This deal is STILL going.  Now you can get them in box silver and black for $17.99

Offering 40 watts of power in a simple, elegant, and extremely affordable package! Easy to use preset wattage settings offer 7 different options for .4 ohm and above atomizers, coming in increments starting at 8 watts all the way to 40 watts! A simple press of the wattage button cycles through the preset settings while battery life is displayed parallel to the wattage settings, providing instant feedback. Automatically adjusting depending on coil resistance, the KBOX monitors and adjusts output for consistent and accurate output. Utilizing a single 18650 battery the KBOX is designed for easy battery exchange. The KBOX chassis is manufactured out of aluminum, providing a light but durable feel, while the enclosure is ergonomically designed to rest comfortably in the palm of your hand. A spring-loaded brass 510 connector ensure constant and consistent contact with all standard 510 atomizers, accommodating atomizers with a diameter of 25mm! Featuring full protection, including short circuit, reverse battery, low resistance, and over-time use protection, the KBOX is perfect for beginners while also offering the flexibility to find a place in the collections of even the most experienced vapers. Simplicity and functionality, at an extraordinary price. The KBOX 40 Watt Box Mod by Kangertech.

 

THE HARD COPY:

  • Made from aluminum
  • Variable Wattage from 8 – 40 watts
  • Requires a 20A 18650 battery
  • Fires down to 0.4ohms
  • 510 Connection
  • Short Circuit Protection
  • Over-current Protection
  • 10 sec cut-off
  • Replaceable Cells
  • Battery capacity indicator
  • Height: 89mm
  • Length: 40mm
  • Width: min 20mm, max: 25mm


WHERE: >> HERE <<

USE COUPON CODE YEAHBABY TO BRING THE TOTAL TO $17.95

 

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

June 14, 2015

IN PYREX: THE INNOKIN ISUB G TANK – $17.36 / $8.66 HEADS


This is the glass tank version of the original iSub tank by Innokin.   I use these tanks and they work fantastic.  The replacement heads are super cheap too!

The iSub G combines high quality construction, a No-Spill Coil Swap System, and a pyrex glass tank. Innokin’s 0.5 ohm coil is made using Japanese Organic Cotton. Manufactured utilizing high grade, 100% Stainless Steel and precisely cut Pyrex, the iSub Sub-Ohm Tank is a beast.

This Product Features:

  • 100% stainless steel
  • High quality pyrex glass
  • Japanese organic cotton
  • Huge 4.5ml capacity
  • Full adjustable airflow
  • No-spill coil swap system
  • Available colors: Clear
  • 0.5 ohm iSub Coil – 20w to 35w

You Will Receive:

  • 1x – Innokin iSub G tank
  • 1x – .5 ohm replacement coil


WHERE: >> HERE <<

REPLACEMENT HEADS: >> HERE <<

USE COUPON CODE VAPORJOE13 TO BRING THE TOTAL TO $17.36
USE COUPON CODE VAPORJOE13 TO BRING THE HEADS TO $8.66
SHIPS FROM THE USA

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

SUNDAY RECAP – THE MOD ENVY REPLAY – 6.13.2015 – ON LOCATION

Here is the Mod Envy replay for 6.13.2015  

On location cluster f*ck edition!

You can check out Mod Envy every Saturday @ 10pm EST 

ON YOUTUBE

ON SOUNDCLOUD

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

CLEARANCE: ATLANTIS V1, V2, MELO, SEGATANK RDA HEAD – $9.99 FS

http://bit.ly/1JNv6ni

 

The very popular rebuildable replacement head for the Aspire Atlantis gets an upgrade.  This now works for the Atlantis, Atlantis V2, Melo, and any other tank that uses Atlantis heads. This upgrade includes more holes for juice and air flow.  These upgrades are meant to increase flavor and vapor production. 


Product includes:

1x RBA head w/ premade coil
1 x Screwdriver
2 x RBA coils


WHERE: >> HERE <<

$9.99 + FREE SHIPPING
SHIPS FROM THE USA

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

THE MAJESTY 150 WATT BOX MOD – $56.18

Here is a great deal on the Majesty 150 watt box mod.   This box mod uses two 18650 batteries and is a steal at just $56.18 with free shipping!  If your looking for high wattage device that wont break the bank – look no further!


THE HARD COPY:

  • OLED screen, real-time monitoring the product data
  • Advice for the atomizer to intelligently identify the power and for the best use power range
  • Use habit memory function, remember the last parameter, reducing the adjusting time for next time’s use
  • Overheat hint, avoiding the products from being damaged for the overheat caused by abnormal high frequency operation
  • Low battery indication,over discharge protection,intelligently limit the power output when it is low battery
  • Protect the battery from contrary connecting, output without load, short- circuit protection hints function
  • Real-time monitoring the battery level, output voltage and the atomizer resistance
  • Smoking for 10 seconds at a time, stop output once beyond the auto protection, recount the time when smoking again
  • Lock the power, avoiding the wrong operation
  • 5 times ON-OFF function
  • Auto sleep function, saving the battery level
  • Increase or decrease the power at 0.5W, to save the time, quickly increase or decrease the power by press the button “+” or “-”  for a longer time
  • Input voltage: 7.4V
  • Atomizer resistance: 0.1-4.0 Ohm
  • Output voltage: 8.5V (Max.)
  • Magnet back cover
  • 510 thread connection (fixed center pin)
  • Spring-loaded battery contacts

WHERE: >> HERE <<

USE COUPON CODE june15gb TO BRING THE TOTAL TO $56.18
FREE SHIPPING

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

June 13, 2015

LOW: CHERRY BOMBER RDA – $11.12

Square atomizers have that lovely fit and finish on top of a box mod.  The Cherry Bomber styled atomizer has the classic “Jessica Rabbit” sitting on top of a bomb.  The 4 post system is milled into the deck air flow comes directly from the top and bottom.  

A great atty at a great price.  Just $11.12

Many colors via the drop down menu to choose from.

 

THE HARD COPY:

  • POM 2-in-1 drip tip + top cap lid
  • 2 air flow systems:
    • 2 air holes on the top cap 
    • 2 air holes on the bottom
  • Quad poles design for dual coil build
  • 510 threading connection with adjustable copper center pin


WHERE: >> HERE <<

$11.12

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

HANA MODZ – IS THE “H” FOR HYPOCRISY?

The H with the albatross in the center is not Trademarked – Feel free to use it.

Lets be clear,  this isn’t about cloning – This is about hypocrisy…

Over the last year Hana Modz has sued at least 5 different companies for cloning their product. Vaporjoes covered all the law suits and provided public court documents to the vape community. One company actually lost the case and owes Hana Modz  hundreds of thousands of dollars. Today the Vaporjoes Network has learned from Vape Politics (Link here) that Hana Modz were including cloned VapeBands with their new mod “The Hana One” when people placed orders. You can also see them pictured here. 

Cloning is cloning regardless of the value of the product. 

What a hypocritical move on the part of Hana Modz!  Vaporjoes is not against cloning, we are, however, against hypocrisy.  I asked the owner of VapeBands, Andrew Kaye, for his thoughts on the matter but he would not comment. There are two questions here.

Is it legal?
Is it moral?

Those are questions that will have to be handled on two fronts. The courts may have to handle the legal side of this, but the community will handle the moral and hypocritical side. Hana Modz has painted themselves in a poor light since the law suits – this situation can’t help them. 


VapeBands has hundreds of companies buying their product. A name brand like Hana Modz using a cheap and inferior product may damage VapeBands reputation. People may think what they are including with their mod are actual VapeBands and this may reflect poorly on Andrew’s company. 


Isn’t that what Hana told us when their mods were cloned?

 

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

BEST PRICE: THE INNOKIN iSUB TANK – $10.63 – SHIPS FROM THE USA

http://bit.ly/1QuELTC

DOLLAR FOR DOLLAR – THE BEST SUBTANK GOING.

I was using one of these on a Sigelei 100 watt on Mod Envy Last night –  works great! 

The Innokin iSub Sub-Ohm Tank combines high quality construction, an innovative No-Spill Coil Swap System, fantastic performance, and various color options! Integrating Innokin’s new 0.5 ohm coil, manufactured using Japanese Organic Cotton, the iSub delivers pure, clean flavor and fantastic vapor output. Manufactured utilizing high grade, 100% Stainless Steel and German Made Polycarbonate, the iSub Sub-Ohm Tank has a capacity of 4 milliliters in a small, travel ready form factor. Featuring staggering 12 mm wide and 3 mm tall dual adjustable airslots, the iSub has the capability to be driven from 20 to 35 watts, making it an ideal match with Innokin’s flagship device, the iTaste MVP 3.0! Priding itself in innovation, Innokin has introduced the No-Spill Coil Swap System, compartmentalizing the coil and liquid holding systems, making coil removal an absolute breeze. Available in Blue, Fuchsia, Dark Gray, and Clear, the Innokin iSub Sub-Ohm Tank is a feature packed and innovative tank at an incredible price! 

Product Features:

  • No-Spill Coil Swap System
  • 0.5 ohm iSub Coil – 20w to 35w
  • Incredible Vapor and Flavor Production
  • Stainless Steel Integrated Widebore Drip Tip
  • 4 Milliliter Capacity
  • 12 mm by 3 mm Dual Adjustable Airflow Slots
  • Stainless Steel Construction
  • German Made Polycarbonate
  • 22mm in Diameter


WHERE: >> HERE <<

REPLACEMENT HEADS: >> HERE <<

USE COUPON CODE VAPORJOE13 TO BRING THE TOTAL TO $10.63
USE COUPON CODE VAPORJOE13 TO BRING THE HEADS TO $8.66
SHIPS FROM THE USA!

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

SNEAK PEEK: EVOLV MAKES A 200 WATT BOARD – THE DNA200

Image kindly stolen from Phil Brusardo’s blog

Well all I can say is… It’s about fuckin time Brandon.

It seems Brandon from Evolv has finally made a chip that matches and even passes the very best China has to offer.  This will be Evolv’s first firmware upgradable and fully  customizable chip. I completely shit on the DNA40 because of its lack of punch and power. From what I can see – Evolv should be proud of this one.  Game changer – Big time.   

Let’s just hope its not plagued with any issues.

A quote from tasteyourjuice.com:


Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

June 12, 2015

BRING THE PAIN: SIGELEI 150 WATT BOX MOD – $65.99 SHIPS FREE USA!

http://bit.ly/1MwBXzb

SWEET DEAL PEOPLE!

The latest box mod from industry leaders Sigelei produces huge, regulated power for less dollars.  The Sigelei is the box mod for you if you want to blow fat clouds, but it’s also for anyone looking for an ultra-reliable, stoutly-built mod with lots of features and adaptability.  Sigelei packaged the 150w with the high end SX330 chip, and with 2 30amp 18650 batteries installed this box mod will put out a monstrous 150 watts on builds as low as .1 ohms and as high as 3.0 ohms.  Great power requires great regulation, and the Sigelei has it in spades: A temperature sensor keeps your rig from overheating, and voltage, short circuit and battery protection is all included.

The Sigeli 150’s chassis features all aluminum construction and ships with a removable silicone sleeve for a sure grip.  The battery cover is magnetic, so switching out the 18650 batteries is a no-hardware cinch.  At lower wattages (as low as 10w) the 150w will vape for days on fully charged batteries, and when it’s time to recharge the advanced chip saves your voltage and wattage presets with the batteries removed.  A spring loaded 510 copper pin works with virtually all atomizers and the high visibility display keeps you informed on all settings and levels.


FEATURES:

  • Visual Operating System
  • Variable Wattage
  • Low Voltage Protection
  • Low Resistance Protection
  • High Voltage Warning
  • Short Circuit Protection
  • Reverse Polarity Protection
  • High Temperature Warning
  • Use Replaceable Battery


WHERE: >> HERE <<
USE COUPON CODE 150WATTDEAL TO BRING THE TOTAL TO $65.99
SHIPS FROM THE USA

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

PURE COPPER: THE NEMESIS MECHANICAL REPLICA – $9.87 – USA SHIPPED

nem·e·sis  ˈneməsis  noun
noun: nemesis; plural noun: nemeses
1.the inescapable agent of someone’s or something’s downfall. 

Available in other finishes like SS and White for the same price.

The Nemesis ( aka Adversary ) is a beautiful adjustable mechanical mod featuring silver plated contact posts and extension tubes. The Nemesis mod accommodates 18350, 18490, and 18650 sized batteries.

This Product Features:

  • Laser etched pattern
  • Fully mechanical mod
  • Stainless steel body
  • Adjustable 510 center pin (silver-plated brass)
  • Bottom lockable firing button
  • Air control ring
  • Recessed 510 connector
  • Compatible with most 510 atomizer and clearomizers
  • Can use with 18650, 18500, and 18350 batteries
  • Dimensions: 22mm diameter, 109mm length
  • Individual serial number


WHERE: >> HERE <<

USE COUPON YEAHBABY TO BRING THE TOTAL TO $9.87

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

ROLLOUT: PROJECT SUB-OHM CLT VERSION 3 RBA – $26.99

Worldwide release of the Project Sub-Ohm™ CLT V3 Mini RDA by Infinite is NOW LIVE!

The Project Sub-Ohm™ Edition CLT V3 Mini RDA Rebuildable Dripping by Infinite is the newest revision of the extremely popular CLT series, featuring a compact body design, upgraded materials, the signature triple slot airflow, and an incredible array of included accessories!


The Project Sub-Ohm™ Edition CLT V3 Mini by Infinite is the newest and shortest revision of the extremely popular CLT series! Featuring a shortened chamber and greatly reduced overall height, the CLT V3 Mini improves upon many of the features that made the CLT V3 a stand out RDA. At the center of the design is the triple stacked staggered airslot airflow, allowing the user to extremely fine tune their airflow and vape experience. The overall height from the base to the port measures 22mm, a far shorter distance than the original. The center post and deck milled negative post holes have been redesigned, featuring a cutaway design that allows for incredibly easy and flexible coil mounting. 11mm ultra bore drip sleeves come included in both black delrin and Pyrex, while a screw in adapter for 510 drip tips coupled with a black delrin flush ring allow for a huge array of styles and functionality changes, right out of the box. A PEEK honeycomb spit back and air dispersion disc is also included to radically change vape experience. Manufactured out of 304 Stainless Steel, the Project Sub-Ohm™ Edition CLT V3 Mini also features a PEEK insulator for high heat resistivity. Value, Functionality, and Style. The Project Sub-Ohm™ Edition CLT V3 Mini by Infinite.

Product Features:

  • Drastically shortened overall height compared to the original CLT V3
  • Triple Stacked Staggered Airslow Airflow
    • Each Measuring 6mm by 2mm
  • Completely Adjustable for Dual Airflow
  • Widened Post Hole Design
    • 3mm Center Post, 2mm Negative Post
  • Juice Well with Juice Channel
  • Black Delrin and Pyrex 11mm Ultrabore Drip Sleeves
  • 510 Drip Tip Adapter with Black Delrin Flush Ring
  • PEEK Honeycomb Insert
  • 22mm Diameter
  • 304 Stainless Steel
  • PEEK Insulator
  • Copper Contact
  • Iconic Project Sub-Ohm™ Engraving
  • Exclusive Serial Run

 

WHERE: >> HERE <<

USE COUPON CODE JOE10 TO BRING THE TOTAL TO $26.99
ALL ORDERS GET A FREE 10ML BOTTLE OF MILLENNIUM JUICE

 

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

PRICE DROP: THE SMOWELL DVP 50 – 50 WATT BOX MOD – $28.98 + FS

 


For that price? In the cart it went!

The Smowell DVP-50 packs a wallop, with a range of 6 to 50 watts available, and all in a package roughly the size of an iStick. The three button interface makes adjustments easy and it houses a single 18650 battery that can be replaced. (There’s still a little confusion about whether or not that battery is included– the description indicates not, but the shipping info indicates it is!…. we’ll keep you posted.) The 510 pin floats to ensure a great fit for your atomizer, and charging is via USB port. It can fire resistances ranging from 0.2 to 4.0 ohms. Another neat feature is the ability to run it in “mech mode” (not regulated). Over all, it’s a compact and economical high wattage option for when you’re on the go, or going places you don’t want to take more valuable devices.

THE HARD COPY:

  • Recessed 510 threading connection
  • Floating 510 center pin
  • Bottom micro-USB charging port
  • 0.66 inch OLED display screen show wattage, voltage, resistant and battery level
  • Variable wattage: Can be adjustable from 6.0W to 50W (in 0.1W increment)
  • Operating voltage: 3.7-4.2V
  • Matches atomizers with 0.2-4.0 Ohms resistance
  • High voltage warning (higher than 4.5V)
  • Low voltage warning (lower than 3.0V)
  • Atomizer resistance check
  • Over heat protection
  • Mech Mode and Wattage Mode switchable
  • House single 18650 battery (battery sold separately)

 

WHERE: >> HERE <<

USE COUPON CODE june15gb TO BRING THE TOTAL TO $29.98
IN STOCK – FREE SHIPPING

 

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone