October 14, 2014

STILL GOING: ASPIRE NAUTILUS MINI + 4 HEADS – $22.99

Deal includes 2 extra heads – so you will get 4 total.

One of the best replaceable head tanks I have used.  Far better then the original Nautilus tank in my opinion.    I use mine on an eleaf iStick – a fantastic little setup!   The mini itself isn’t a tiny tank – its about the same size as a normal Aerotank.

THE HARD COPY:

The Aspire Nautilus Mini is the next big thing in the vaping world. This tank system uses a new type of coil technology that ensures proper saturation to the wicking material.. The Nautilus Mini uses a BVC (bottom vertical coil) that allows for much greater vapor production and extremely enhanced flavor. This bottom vertical coil unit is comparable to a stone age cartomizer in a sense that there is no wicking material that goes directly through the coil. The vertical coil is surrounded by wicking material on the outside, thus allowing airflow to be pulled straight through the center of the coil. Though this tank system does not use a dual coil, the vapor production from it tops any dual coil glassomizer that is currently on the market. Another huge advantage to this new coil technology is that the lifespan of the coil is much more exceptional than its predecessors. These new bottom vertical coils are also backwards compatible with the original dual coil units for the Aspire Nautilus, meaning that the old styled coil units will work properly in the Nautilus Mini and the new styled coil units will work properly in the original Aspire Nautilus. Adjustable airflow is almost a must in the vaping world today, and the Aspire Nautilus Mini offers a uniquely redesigned style of airflow control where pre-drilled air holes rotate on a ring that clicks into place for the user’s desired setting. The Nautilus Mini is constructed entirely of Stainless steel, with a pyrex tank section. Each part of the tank system can be disassembled for cleaning purposes also. All in all, the Aspire Nautilus Mini is a tank system that is a thing of pure beauty to witness.

What’s in the box:

  • Fully rebuildable Aspire Nautilus tank
  • eGo beauty ring
  • (1) 1.6 ohm dual coil atomizer head (attached in tank)
  • (1) 1.8 ohm dual coil atomizer head
  • (2) Extra replacement heads
  • Instruction manual
WHERE:  >> HERE <<

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

REPLICATED: THE DARK HORSE RDA – $13.45

http://goo.gl/mi31vk
A BEAST of a RDA!   Now replicated at a FANTASTIC PRICE!

Thick heavy posts, monster airflow, and large wide bore delrin drip tip.

THE HARD COPY:

  • Removable 510 drip tip
  • The POM top cap lid is removable for easy access to the deck without removing the top cap
  • The lid also works as a heat insulator
  • 510 threading connector, adjustable copper 510 center pin
  • Tri-post design for single/dual coil build
  • 6 air control holes on the sleeve
  • Laser engravings logo
  • 22mm diameter
  • Height without drip tip: 34mm
  • Comes with a POM 2-in-1 top cap lid + drip tip combo
WHERE: >> HERE <<
$13.45
Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

October 13, 2014

DIFFERENT: WIDE BORE DRIP TIPS WITH AIRFLOW CONTROL

Constructed of stainless steel with double o-rings for added stability, these wide-bore drip tips boast a special feature. The brightly colored aluminum band rotates to allow you a little extra airflow. Why? Well, we hear rumors that the biggest cloudchasers “sidestream” or pull in a little fresh air alongside their vapes. We haven’t had a chance to test it, so let us know how it works for you! They are also nice for folks who just want to cool or thin down their vape a little. Available in 11 colors for $2.33 each, or if you just can’t decide grab the 11-pack for just $20.01.

Colors can picked from the drop down menu.

WHERE: >> HERE <<

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

BLEM SALE: DRAGON PROVARI’S ON SITE

A very hard Provari to get.

These Provari’s are only avialable in B&M’s.   They have never sold them online.  Today Provari has stocked the Dragon in their BLEM clearance section.

For those looking to pickup a Dragon at a good price – get them while you can.

Features of the ProVari Polished Dragon:

• Microprocessor controlled
• 2.9-6.0 variable voltage range with .1 volt increments
• Built-in digital display
• AccuSet™ Technology – Self-Calibration Feature
• Atomizer Ohm’s checker built-in
• Battery voltage checker built-in
• Translucent light-up pushbutton with low battery indicator
• Single battery design
• Stock 510 Connection
• Classy looking dragon design made of polished stainless steel
• 16 second safety cutoff
• Short circuit protection
• Reverse battery protection
• Thermal monitoring system
• Amperage limiting
• Battery monitor and over-discharge protection
• Machine engraved logo
• Vented for added safety
• Proudly made in the USA
• 1 Year warranty with optional 2 year warranty
• Measures – 3.49″ L X .90″ Dia.(without atomizer)
• Weight – 4.2 ounces (without battery)

WHERE: >> HERE <<

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

TASTE THE RAINBOW: THE MANHATTAN REPLICA IN COLORS – $12.80

http://goo.gl/GSo6GZ
You’ve heard all the buzz surrounding the Manhattan styled mods, and now you can get one in brightly colored anodized aluminum. Body is anodized aluminum, contacts are brass, insulators are delrin. Bottom firing button is magnetic and does not lock. Houses a single 18650 battery.

THE HARD COPY:

  • 510 threading connection
  • Brass contacts w/ Derlin insulators (positive insulator is adjustable)
  • Bottom magnetic firing button, without lock
  • Engraved logo
  • Houses single 18650 battery (battery sold separately)
  • Internal diameter: 18.8mm
WHERE: >> HERE <<

$12.80

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

October 12, 2014

FROM THE USA: THE ONSLAUGHT RDA REPLICA – $16.99

http://101vape.com/rebuildable-atomizers-tanks/455-onslaught-rda-clone-by-tobeco.html#oid=1003_290
http://101vape.com/rebuildable-atomizers-tanks/455-onslaught-rda-clone-by-tobeco.html#oid=1003_290
CHEAPER THEN FASTTECH – SHIPPED FROM THE USA!

This clone version looks to be a nice 1:1 copy. The atomizer features an adjustable airflow control ring, a quad-post design for triple coil builds, 3.6mm deep juice well, stainless steel posts, chromed brass 510 center pin, large wire holes, and engraved logos.

THE HARD COPY:

  • Compatible with 510 drip tip (drip tip sold separately)
  • Air flow adjustable (3 air holes on the AFC ring)
  • AFC ring material: Black plated stainless steel + brass + copper
  • Quad posts with slotted head screws (1 positive + 3 negative)
  • Posts material: Stainless steel
  • Deep juice well, approximately 3.6mm
  • 510 connection (chromed brass center pin)
  • With logo engraving
WHERE: >> HERE <<
$16.99
Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

October 11, 2014

CARBON FIBER: THE KNIGHT REPLICA MECHANICAL (6 COLORS) – $23.29

http://shrsl.com/?~6rb8
Now in 6 new colors!

Here’s something a little different and in a very good way. It’s the Knight styled 18650 mechanical mod, and it’s constructed primarily of brass or copper with a carbon fiber outer tube with a Maltese Cross cut into it to expose the brass below. Spring-loaded bottom firing switch has locking ring to prevent accidental firing.

THE HARD COPY:

  • Recessed 510 connection
  • Silver plated brass battery contacts (adjustable)
  • Brass tube wrapped with carbon fiber
  • 4 vent holes on bottom cap
  • Laser engravings
  • Houses single 18650 battery (battery sold separately)
  • 23mm diameter
  • Bottom spring-loaded firing button, with reverse-threaded locking ring
WHERE: >> HERE <<

$23.29

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

BOGE XL CARTOMIZERS – BLACK OR STEEL – $2.97 FOR 5

Did you know that more then 50% of the ecig industry still uses cartomizers?
I couldn’t believe it myself – but its true.

Here is the absolute lowest prices I have ever seen on a box of Boge XL cartomizers.
You can get them in both stainless steel or black.   They also come in 2.0 or 3.0 ohms.

The industry standard for cartomizers is Boge!

Super simple to use – great for testing flavors!

WHERE: >> HERE <<

$2.97 for a box of 5

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

ANOTHER: THE ELEAF ISTICK DROPS AT $29.99 + FS

INCLUDES FREE SHIPPING FROM THE USA!

 

 

I got my Istick the other day and I must say – its an amazing little mod.   Its ULTRA portable.  Smaller then the original vaporshark – this little mod lasts a long time and packs 20 watts of power.

I was so impressed I bought 3 more.

THE HARD COPY:

  • 2200mAh Li-Ion Battery
  • VV/VW – up to 20W and 3v – 5.5v
  • OLED display
  • 510-Threads
  • Power on/off: Press the button for five times to turn the iStick on and off.
  • 10-sec Protection: Maximum of 10 seconds per drag.
  • Atomizer Short-Circuit Protection: If atomizer short-circuits, the OLED screen show “Atomizer Short”.
  • Low-Voltage Protection: Once the battery is below 3.3V the OLED screen will show “Lock”, which means its time to recharge.
  • Unlock the Low-voltage Protection: The iStick begins working again once it reaches 3.65V.
  • Low power Alert: If the battery’s power is lower than 10%, the power symbol on the screen will flash.
  • Atomizers from 1ohm to 3ohm capable
  • Accurate Metering
  • Pass-Thru vaping while charging
  • Charged via micro usb
WHERE: >> HERE <<

$29.99 + FREE SHIPPING
 

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

October 10, 2014

GREAT PRICE: THE KANGER MEGA AEROTANK – $22.49

http://101vape.com/home/329-kanger-aerotank-mega.html#oid=1003_211

The Kanger Mega Aerotank is the accumulation of all the best things from the Protank and Aero series. Like its predecessor, this clearomizer comes with food grade stainless steel, pyrex glass, and dual coil heads. The Kanger Mega Aerotank also comes with an upgraded airflow control base to really maneuver blasts of flavor. This genuine Kanger Aerotank Mega should be the go to for any serious vapor!

The Aerotank Mega includes: 

  • Upgraded Kanger airflow control base
  • 510 threading
  • 3.8 mL capacity
  • Pyrex tank and stainless tube (glue free)
  • Bottom dual coil atomizer heads

 

Airflow Control: Turn the air control valve at the base of the tank clockwise to decrease airflow. To increase airflow, turn the air control valve counter-clockwise.

Package contents: 

  • 1 x Kanger Aerotank Mega (Pyrex tank, top cap, bottom cap and Airflow control 510 base)
  • 1 x Stainless tube
  • 1 x Glass tube
  • 1 x 510 drip tip
  • 2 x dual coil 2.0 ohm atomizer heads
WHERE: >> HERE <<

USE COUPON CODE YEAHBABY TO BRING THE TOTAL TO $22.49

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

FAT CAP: THE MUTATION X STYLE RDA WITH NEW TOP CAP – $8.73

http://goo.gl/VUZKg5
One thing replicas are good for is making changes for the better.   Here is one of those examples.   Look at that fat top cap?  A nice upgrade and the price on this RDA is fantastic!

THE HARD COPY:

  • 2-in-1 drip tip + top cap
  • 15.6mm diameter mouthpiece
  • Finned top cap for better heat dissipation
  • Air flow adjustable, 18 air holes on the sleeve
  • Air hole diameter: 1.7mm (approx.)
  • Tri-post design for single or dual coil build
  • Posts material: Chromed brass
  • 510 threading connection (chromed brass center pin)
  • 22mm diameter
  • Laser engravings
WHERE: >> HERE <<
$8.73
Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

THE $9.00 MAGMA STYLE RDA THAT SHIPS FROM THE USA

http://shrsl.com/?~6qz1
Here is a great deal on the Magma 1 to 1 replica. With tons of airflow provided by nine holes to choose from in a ring on the base, the airflow comes up from the base directly aimed at the coils. A deep juice well traps tons of juice to feed your thirsty build. Slotted posts make building a breeze, and frankly, the images on this look awesome. It appears to be a beautifully crafted replica, well worth the price. Users of the original claim to be very pleased with the performance and flavor, so we’ve got our eye on this one! It’s gonna be big!

THE HARD COPY:

  • Stainless steel construction
  • 22mm in diameter
  • Two 3.97mm wide poles (screw type – shoot and screw) easier to rebuild and better conductivity
  • New technology – dual DIRECT TO COIL air-hole for maximized flavor and vapor
  • 9 air holes on the outer casing
  • Extended juice basin – can hold up to 40 drops of juice with minimal change of leakage (for a dripper)
  • Poles are welded to the base for durability
  • Positive insulator hidden in the base to avoid melting
  • O-ring less – to make it maintenance free
  • Dome chamber top cap for better flavor
WHERE: >> HERE <<

$9.00

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

LOWER PRICE: THE ORCHID STYLE GRAVITY FED TANK – $8.66

http://myurl.co/orchid

Here’s a great deal on the Orchid styled gravity-fed rebuildable atomizer. With similar function to the kayfun styles, the Orchid features an ideal setup for dual coils, with four channels to feed juice to your thirsty build. More juice, more vapor, more flavor! Attractive styling and a durable PMMA tank make it a great looking atty for your setup.

THE HARD COPY:

  • Compatible with 510 drip tip (drip tip sold separately)
  • Quad-pole for dual coil build
  • 4 wick channels
  • 2 air holes
  • 510 connection (brass contact)
  • Laser engravings on the chimney

WHERE: >> HERE <<

$8.66

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

TOO LITTLE TOO LATE? EVOLV DNA40 ALREADY DEAD TECH?

 

 
With the advent of cheap wattage coming from China – is the Evolv DNA40 already dead tech?
We know you can change the temperature with this new chip, but does that really matter to anyone?  Is it just a gimmick or a stop gap to separate themselves from current Chinese wattage chips?   How long until that small upgrade is cloned and added to 150+ watt chips?
On the flip side one “prominent” vaper told me at VCCTN  “to control temperature is a way to enter the dry herb market”.
It did make me raise my eyebrow for a moment.
Either way — it seems to be too little to late.   China is crushing America in the wattage market.  It comes down to watt per dollar.  Currently you can get 180 watts (with the god mod) for less then $1.00 per watt.  With 200 watts+ on the horizon can Evolv even compete in this game anymore?
With something as tiny and inexpensive as the Eleaf iStick –  China is all the rage at the moment in terms of regulated devices.  Mod makers are feeling the pinch.  No longer can they complain about being cloned.  They are being squeezed out by simple innovation at cheap prices.
Tube mods are dieing — box mods are the new baby.   Box mods are easy to build and cheap..  With this latest trend every Tom, Dick and Harry can become a pretty decent mod maker.
This blogger welcomes this new trend. Mod making has reverted back to its early days when it wasn’t about exclusivity.
….Its about whats effective!
😉
Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

September 30, 2014

CEASES AND DESIST: YOU CAN’T TALK ABOUT CLONES

The Vaporjoes Network responds 
 

The Vaporjoes Network and Vaping Underground respond to the latest ceases and desist letters making the rounds.   Vaping Underground got a few of these letters as well as other forums / bloggers.

 

DISCUSS ON VU:  >> HERE <<

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone