August 6, 2014

IN STOCK FROM THE USA: THE TUGBOAT RDA IN 3 STYLES – $11.99

http://101vape.com/home/345-tugboat-rda-clone.html#oid=1003_219

An epic in stock deal from the USA!

The Tugboat is one of my favorite RBA’s.   I have legit versions and they are FANTASTIC!

This is a clone of the Tug Boat RDA.  If you know the authentic Tug Boat you know it hits like a freight train. This will be a 1:1 clone of the authentic and being offered at a much deeper discount! Check out the different finishes that we have ordered! Here are the specs for the Tug Boat RDA clone:

THE HARD COPY:

  • Comes with stainless steel drip tip with delrin base
  • Matching serial number on drip tip and atty
  • 304 stainless steel
  • Tripost
  • Extra deep juice well
  • Reduced chamber
  • 2 Pre-drilled holes 3/32
  • Laser etched engraving


WHERE: >> HERE <<

$11.99

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

August 5, 2014

VAPE FOR DAYS ON THE GROOVE 2 FOR JUST $36.99

Really Vaporjoe the Groove II?

Yes the Groove II.    Think of it in terms of the very popular MVP2.

This mod goes 4 watts higher, has almost twice the internal battery size,  and costs much less.  The Groove II boasts a massive 3800mAh internal battery and uses the standard 15 watt smoktech chip that comes on your Zmax.  This also has a large 5 amp limit.  

This also comes with a 90 day warranty.

You will get days out of this device before having to recharge.   

THE HARD COPY:

SmokTech re-indroduces the Groove with the Groove II. Everything you loved about the orginal Groove remains the same. All the small screws that hold the device together are now flat instead of pointed, so you no longer have to worry about the battery getting punctured if you drop it. The battery has also been reinforced, making it very difficult to ever come loose or rattle.

This is a variable volt, variable watt mod. The Groove adjusts from 3.0 to 6.0 Volts in .1 volt increments or 3.0 to 15 Watts in .5 Watt increments and has a cool backlit OLED display.  The Groove has a maximum output of 5 Amps.

There are ample vent holes in the side of this APV for added safety.

The groove has an internal 3.7V, 3800mAh Li-polymer battery that lasts far beyond most other batteries.  Included with the APV are a mini USB to USB cable for charging with a computer and a USB to AC adapter for charging with a wall outlet. 

The button on the top of the Groove can turn the device on and off with 5 quick pushes.  Read the resistance of your cartomizer or tank by holding the “+” button for 3 seconds.  Easily adjust Voltage or Wattage by using the “+” or “-” button.  Hold down the “+” and “-” buttons together for 3 seconds to switch between Voltage and Wattage.  Output Voltage or Wattage is displayed when you press down the top button.  Battery Voltage is displayed by pressing the “-” button for 3 seconds.

The Groove only needs a 510 style tank, cartomizer, CE4 and some e-liquid and it is a complete ready to go unit with nothing else to buy!

WHERE: >> HERE <<

$36.99

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

COLORS: THE AR MECHANCIAL REPLICA GETS NEW CLOTHS

http://shrsl.com/?~66eb
http://shrsl.com/?~66ed
http://shrsl.com/?~66ef
http://shrsl.com/?~66ee
The AR style mechanical (aka The Hollow-out Mod) has gone live in some crazy new colors.  It’s unique design has made it a very popular device.  Now showing up in a ton of new flavors – these are bound to very very popular.   This price is about $12.00 cheaper than anyone else I have seen.

THE HARD COPY:

  • Hollow-out design
  • 510 threading connection
  • Copper contacts
  • Positive contact is adjustable
  • Spring-loaded firing button, without locking ring
  • Houses single 18650 battery (battery sold separately)


WHITE AND GREEN: >> HERE <<

POLISHED BRASS: >> HERE <<

PURPLE CAMO: >> HERE <<

WHITE AND RED: >> HERE <<

$24.34 ea
 
Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

STILL GOING: EPIC DIY SALE: 1 LITER OF 100MG NIC BASE – $50.00

http://shrsl.com/?~65ao
I posted this 5 days ago and a ton of people got in on this deal.  
Its STILL going strong – so I wanted to make sure everyone got in on it.

Today this vendor is having a an epic sale on 100mg nic base.  
I have used them in the past – its very very clean! 

For someone like me I can turn this into 16 LITERS  ( 540 30ml bottles ) of juice at my nic level.  
Impressive for a very small investment.

This is a great opportunity to ensure you have a supply for any issues that may arise.

Great for mom and pop juice companies too!

This is 100% flavorless nicotine base.  
All you need to do is cut it to your desired mg level, add flavoring to taste.

I keep my nic in the freezer to extend its shelf life.


THE HARD COPY:

Our famous Unflavored Nicotine “Smoke Juice” E-Liquid is made with the highest grade nicotine available.  Buy with confidence knowing that you are getting the very best nicotine available and that it is always distilled from actual tobacco leaves not synthetically produced.  For more information read below and click the link to see our latest batch testing results.

WHERE: >> HERE <<

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

FLASH: HCIGAR CLONES THE ORIGINAL VAPORSHARK

Dubbed the DNA30 Mini – This is a clear copy of the original Vaporshark DNA.  
  
With the exception of the two up and down buttons – its spot on.   They even copied the optional belt clip screws.   These come with the micro usb charger and use an internal LiPO battery – much like the original and they have an 18650 version.

This is the original Vaporshark DNA20 body with a CHDNA30 board.  Vaporshark has long since upgraded their design but anyone who bought the original would spot this a mile away.

The next question.  Will this sell?  

I am a HUGE fan of the legit Vaporsharks.  I just bought 10 of their 18650 version for giveaways.  
They are one of the few legit DNA30’s that have real staying power.

This all comes down to build quality and price. If we have a solid device priced under $75.00 retail?  We have a winner and it will sell like crazy.   If they try and make this a $100.00 item – its DOA. 

There is a fine line between sizzle and fizzle. 

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

August 4, 2014

BLOWOUT: LAVALOCK v4 (AKA TITAN REPLICA) – $19.98 + FREE SHIPPING

http://goo.gl/Unr42p
$19.98 FREE SHIPPING FROM THE USA!

The Lavafire Lock is an ultra lightweight mod that sports stellar good looks.  This is a telescopic design and has a unique locking mechanism to prevent misfires.  This is the replica of the “Titan mechanical”.

  • 510 Threaded
  • High quality mechanical mod
  • Top pin and button pin is brass
  • Aluminum or stainless construction
  • CNC machined.
  • Mechanical switch on/off “locking” button
  • Safety features include: special insulative material and air holes on the main body
  • Variable battery device. Use with: 18650, 18500, 18350
  • No PCB inside to avoid short circuit and breakdowns

WHERE: >> HERE <<

$19.98 + FREE SHIPPING

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

THE TUGBOAT RDA REPLICA DROPS FOR $11.00

I have been a huge fan of the Tugboat RDA.  I’m also a huge fan of cheap prices.   This is a match made in heaven.   The Tugboat is a fantastic dual coil dripper that is built solid.  Out of all the three post drippers I own the Tugboat is my favorite.  Matching engraved and insulated drip tip included.  


THE HARD COPY:

  • 510 drip tip (with heat insulator)
  • 2 air holes
  • Deep juice well (approximately 4.5mm deep)
  • Tri-post design
  • Stainless steel posts
  • Copper 510 center pin
  • 22mm external diameter
  • Height without drip tip: 31mm
  • Laser engravings

WHERE: >> HERE <<

$11.19

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

August 3, 2014

EPIC PRICE: AEROTANK GIANT STYLE 26650 KIT – $19.03

http://shrsl.com/?~6627
The  Aerotank Giant is the accumulation of all the best things from the Protank and Aero series. Like its predecessor, this clearomizer comes with food grade stainless steel, Pyrex glass, and dual coil heads. The Aerotank Giant also comes with an upgraded airflow control base to really maneuver blasts of flavor. This Aerotank Giant should be the go to for any serious vapor! 

The Aerotank Giant includes:

    • Upgraded Kanger airflow control base
    • 510 threading
    • 4.5 mL mL capacity
    • Pyrex tank and stainless tube (glue free)
    • Bottom dual coil atomizer heads

Airflow Control: Turn the air control valve at the base of the tank clockwise to decrease airflow. To increase airflow, turn the air control valve counter-clockwise. 

Package contents: 

  • 1 x  Aerotank Giant (Pyrex tank, top cap, bottom cap and Airflow control 510 base)
  • 1 x Stainless tube
  • 1 x Glass tube
  • 1 x 510 drip tip
  • 2 x dual coil 2.0 ohm atomizer heads

WHERE: >> HERE << 

$19.03

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

HALF PRICE: EFEST 14AMP 18650 IMR BATTERIES – $5.69


Remember when these were $9-$10.00 ea? 

Today this USA vendor is running a great deal on a sold 18650 cell.   The original 14 amp Efest 18650 battery is been a tried and true battery in our community for a while.    You can safely sub-ohm with these cells down to about .5 (I like to give myself some room).   They also work great in all standard regulated and unregulated mods. 

THE HARD COPY:

These are rechargeable eFest brand LiMn (commonly referred to as Lithium Manganese or LiMn) batteries. They are safer chemically than Li-Ion batteries and do not need a protection circuit. These cells can handle high amperage and are safe in series or in parallel. They can be charged with any Li-Ion battery charger with an output of 4.2V. These have a flat top. They are 3.7V batteries that are rated for 2000mAh. Battery cover may vary but the batteries are always high quality and accurately rated.

Quick Specs:

Maximum Continuous Discharge Rate: 14A
Maximum Continuous Charging Rate: 4A
Chemistry: Li-MN
Rated Capacity: 2000mAh
Rated Voltage: 3.7V
Diameter: 18mm
Height: 65mm

WHERE: >> HERE <<

USE COUPON CODE ECF5OFF TO BRING THE TOTAL TO $5.69

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

SWAP: THE CHANGELING REPLICA MECH – $29.93

http://shrsl.com/?~65w4
The changeling is a new and refreshing mod.   You can change the look with different tubes and “pants”.  The top cap and button mechanism remain the same in full copper for very little voltage loss.   Check out the site to see the different configurations you can set up.  

A very very neat mod at a great price!

THE HARD COPY:

  • 510 threading connection
  • Copper battery contacts
  • Adjustable positive contact
  • Bottom magnetic firing button, with reverse-threaded locking ring
  • 20.3mm external diameter (22mm with sleeve)
  • 18.4mm inner diameter
  • Stainless steel sleeve
  • Houses single 18650 battery (battery sold separately)
  • Laser engravings on the sleeve
  • Comes with an extra brass sleeve

 

WHERE: >> HERE <<
 
$29.93
Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

August 2, 2014

BELOW COST: HOUSE OF HYBRIDS DRIP TIPS!

RBAsupplies (maker of ReadyXWick) is running a crazy sale on all their House of Hybrid drip tips.   These drip tips are some of the best going.  They come in all different styles, sizes, and materials.   I bought one of these at VapeBash and they are a finely crafted work of art!

At these prices they will not last long.   Get in while you can!

They are running this deal BELOW what they paid for them – so you will never see these prices again.  
Crazy crazy deal if you ask me!

There are two pages worth of drip tips so make sure to check them all out!

Be sure to check out his ReadyXWick too!

WHERE: >> HERE <<

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

SEXY: THE FAT SNOW WOLF 26650 REPLICA IN COPPER – $29.69

http://shrsl.com/?~65t5
The 26650 Fat Snow Wolf replica is a massive mod.  Made of pure copper and uses GOLD plated brass contacts for great conductivity.  If your looking for a beefy copper mod – look no further.   The price for this very large mod is very reasonable at just $29.69

THE HARD COPY:

  • 510 threading connection
  • Adjustable 510 center pin
  • Gold plated brass battery contacts
  • Reverse-threaded locking ring
  • Deep logo engravings
  • 30mm tube outer diameter
  • 27.4mm tube inner diameter
  • Houses single 26650 battery (battery sold separately)

 

WHERE: >> HERE <<
 
$29.69
Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

LEGIT: THE EVOLV DNA30D BOARD w/ USB PASSTHROUGH BOARD – $47.49

http://goo.gl/q4KLaS


There are still plenty of vapers and mod makers that are looking for the DNA30D board from Evolv. Today they are IN STOCK from a very reputable vendor.  You are also getting the USB passthrough board as an added bonus.

The DNA system lets anyone build Evolv’s revolutionary power regulated technology into their own products. The DNA 30D is a power regulated digital switch-mode DC-DC converter for personal vaporizers. It offers controlled power from 7 to 30 watts, runs from a single lithium cell and includes protective features such as over-current, over and under voltage protection and a thermal shutdown. It features a small OLED display, analog or digital user controls, power adjust lock, on-board buttons and synchronous rectification for maximum battery life and minimal heat generation.

The DNA30D is the same size as the DNA20D.

Our Micro-USB charging module lets you add the functionality of on-board charging to your DNA 30 and DNA30D projects or can be used as a standalone charger for non-DNA projects. It is designed for charging 3.7V 1S Li-Ion and Li-Poly cells. An on-board status LED illuminates red when charging, green when fully charged, and orange when no battery is present. Mounting holes for #2 screws are provided for easy attachment.

WHERE: >> HERE <<

USE COUPON CODE ECF5OFF TO BRING THE TOTAL TO $47.49


Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

OUCH: THE MANHATTAN REPLICA GOES LIVE FOR $17.03

http://shrsl.com/?~65pt

You knew it was coming, and now it’s here. The replica of the infamous Manhattan mechanical mod is now available in aluminum with a black finish and brass accent. Features include a strong magnetic bottom-firing switch, brass contacts, and a floating positive pin. Best yet, you can get it for only $17. 

THE HARD COPY:

  • 510 threading connection
  • Floating 510 center pin
  • Brass battery contacts
  • Bottom magnetic firing button, without lock
  • Inner diameter: 18.5mm
  • With logo engraving
  • Houses single 18650 battery (battery sold separately)

WHERE: >> HERE <<

$17.03

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

August 1, 2014

IT DROPS: THE PLUME VEIL REPLICA – $11.19

http://shrsl.com/?~65o0
Well it was only a matter of time.   The Plume Veil RDA replica has been making its rounds for the last few weeks all over Facebook and eBay.   Today it drops at an incredibly low price.  At about $2.00 over cost – your not going to find it cheaper.


THE HARD COPY:

  • Stainless steel construction
  • Removable 510 drip tip
  • Unique design with three separate sources for airflow:
    • Air Slots in front of coil, with AFC
    • Air holes through negative posts to bring air to back side of coil
    • Air holes in top of cap to create a vacuum effect
  • Negative posts are milled into the deck
  • Deck is gold plated stainless steel
  • Delrin insulator at drip tip (also serves as AFC for top air holes)
  • Rotating “T” center post to accommodate a multitude of different builds
  • Post holes size: approximately 1.7mm
  • 22mm external diameter
  • Height without drip tip: 29.5mm
  • Laser engravings
  • 510 threading connection

WHERE: >> HERE <<

$11.19

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone