July 30, 2014

EPIC DIY / JUICE MAKER SALE: 1 LITER OF 100MG NIC BASE – $50.00

http://shrsl.com/?~65ao

With all kinds of regulations coming down – its a good idea to pickup a $50.00 insurance policy.  This is enough Nic base to last the average vaper (after its cut) for years to come.  

For someone like me I can turn this into 16 LITERS  ( 540 30ml bottles ) of juice at my nic level.  
Impressive for a very small investment.  This also gives you an idea of how much profit is in juice making. 🙂

This is a great opportunity to ensure you have a supply for any issues that may arise.

Today this vendor is having a an epic sale on 100mg nic base.  
I have used them in the past – its very very clean! 

Great for mom and pop juice companies too!

This is 100% flavorless nicotine base.  
All you need to do is cut it to your desired mg level, add flavoring to taste.

I keep my nic in the freezer to extend its shelf life.


THE HARD COPY:

Our famous Unflavored Nicotine “Smoke Juice” E-Liquid is made with the highest grade nicotine available.  Buy with confidence knowing that you are getting the very best nicotine available and that it is always distilled from actual tobacco leaves not synthetically produced.  For more information read below and click the link to see our latest batch testing results.

WHERE: >> HERE <<

WARNING: For experienced DIY’ers only.  100mg nic base is nothing to play around with.  Nic at this level is highly toxic.  This is to be broken down and mixed.  Use proper protective gear when mixing at these levels.

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

BLOWOUT: MNKE 26650 BATTERY FROM THE USA – $7.59

 
The gold standard of the high amp 26650 batteries is the MNKE 26650.   These have been a tried and true battery for years.   Now being offered at a great price from a reputable vendor.  This price is too low to pass up!


THE HARD COPY:

MNKE batteries are the definitive battery for the mechanical-mod user.  Not only are these the safest batteries available, they also perform better for a longer period of time.  The high amp-limit on these batteries means you can build sub-ohm coils without fear of the batteries venting.  These are 3500mAh batteries, and can hold a charge above 3.7-volts for much longer than other IMR batteries, which means hours of use before a noticeable difference in voltage compels a battery change. These batteries will perform just as well in an APV or Variable Voltage/Variable Wattage mod, although the advantages won’t be as apparent. If you like to build your own sub-ohm coils on a mechanical mod, you won’t believe the performance and battery life these cells offer.

Specifications:

Brand Name: MNKE
Size: 26650
Type: Li-Mn (High Drain)
Rated Capacity: 3500mAh
Nominal Voltage: 3.7V
Peak Voltage: 4.2V
Rechargeable: Yes
Protected: No
Chemistry: Lithium manganese Dioxide (Li-Mn02)
Style: Flat Top
Color: Orange
Maximum Continuous Discharging Current: 20 A
Maximum Pulse Discharging Current: 60 A
Maximum Continuous Charging Current: 6.5 A



WHERE: >> HERE << 

USE COUPON CODE ECF5OFF TO BRING THE TOTAL TO $7.59

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

USA DEAL: ZENITH V2 RDA IN 3 STYLES – $14.99

http://www.pimped.info/click/click.php?id=288

 

IN STOCK AND READY TO SHIP FROM THE USA

The Zenith v2 replica is well known for its build quality and most importantly its airflow!  
The replica’s debut in three different styles.  The price can NOT be beat!

THE HARD COPY:

  • 22mm device
  • WELDED negative posts
  • Slit holes for easy building
  • Hidden delrin insulator at drip tip entry
  • Adjustable silver plated copper contacts ensure flush mounting on any device
  • Classic Zenith engraving
  • Dual adjustable air holes with LOCKING AFC ring
  • 510 thread atomizer

Comes with SS, Copper, and Black PVD airflow control rings

WHERE: >> HERE <<

$14.99

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

July 29, 2014

STEAMPUNK: THE ETCHED COPPER – $39.23

http://shrsl.com/?~654q
http://shrsl.com/?~654q



There have been a few different finishes on this mod but this by far is my favorite.   I have resisted putting these up until now.  These full-featured steampunk styled mod house an 18650 battery. Features include a magnetic bottom firing switch with reverse threaded locking ring, copper contacts, an adjustable positive pin, and really cool detailing on the tube.

THE HARD COPY:

  • 510 threading connection
  • Adjustable 510 center pin
  • With air-channel cuts on the top cap
  • Copper battery contacts
  • Adjustable positive contact
  • Bottom magnetic firing button, with reverse-threaded locking ring
  • Inner diameter: 18.6mm
  • Houses single 18650 battery (battery sold separately)

WHERE: >> HERE <<

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

ORIGINAL & AFFORDABLE: THE ORCA RDA + FREE JUICE – $17.99

The ORCA RDA is an original design by Fcusecig.  This is the same company that makes the popular Argus RDA.   This 3 piece design is simple and effective.  This offers a very deep drip well and massive holes for maximum airflow potential.

THE HARD COPY:

  • 3 post designs
  • Made of 304 Stainless Steel
  • Multiple Adjustable Air Flow Control options to fit your build
  • Unique Top Cap Design
  • Deep Juice Well
  • Beautifully designed and engineered
  • Originality and Affordability in One

WHERE: >> HERE <<

USE COUPON CODE JOE10 TO BRING THE TOTAL TO $17.99
ALL ORDERS GET A FREE 10ML BOTTLE OF MILLENNIUM JUICE

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

RESTOCKED: GWAR LIQUIDS RETURN TO MTBAKERVAPOR!

http://shrsl.com/?~64wa



THE GWAR LINE HAS BEEN RESTOCKED!  
THESE ARE GETTING IMPOSSIBLE TO BUY DUE TO HOW POPULAR THEY ARE.
I HAVEN’T SEEN LIQUIDS THIS POPULAR SINCE THE DEBUT OF PLUID.

They have finally restocked in all flavors and nic strengths.   
Get in quick before they sell out again!

I had the opportunity to try all these liquids at Vapefest DC and loved them!   Great names, great flavors and finally mtbakervapor has glass bottles!   Cheap at $9.89 per 30ml.  Check them out, your really really going to love them!

German Chocolate Beefcake, Bloodbath, and Jizmoglobin are among my favorites. 

WHERE: >> HERE <<

USE COUPON CODE VAPORJOES TO BRING THE TOTAL TO $9.89

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

July 28, 2014

THE MEPHISTO RDA WITH THE 3 RING KIT – $15.81

The Mephisto rebuildable dripping atomizer clone is a high quality drip atomizer composed of stainless steel with a stainless air flow control ring. The Mephisto atomizer clone features massive post holes that can easily accommodate thick kanthal wire and multiple coils. 

The Mephisto clone large screws that easily allow you to secure your coils with ease. The Stainless Mephisto RDA clone stands above all for builds that demand huge air flow. It has dual cyclops style air holes that allow you to adjust the airflow of your atomizer. 

The Mephisto atomizer clone features silver plated contacts to ensure your voltage drop stays as low as possible. The Mephisto RDA clone features a standard 510 threaded connection and will work with any mechanical mods that are equipped with a 510 connection. The Mephisto atomizer clone is 22mm in Diameter.


THE HARD COPY:

  • Stainless steel construction
  • Compatible with 510 drip tip (drip tip sold separately)
  • Hidden Derlin insulator on the drip tip entry
  • Sliding airflow control, single or dual air hole option
  • Tri-post design, with flat head screws
  • 3mm pole holes and 4mm deep drip well
  • Stainless steel posts
  • Silver plated 510 contact pin (adjustable)
  • 22mm diameter
  • CNC logo engraving
WHERE: >> HERE <<
$15.81

 

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

IMMINENT: PROVAPE TO DROP THE FIRST VARIABLE WATTAGE PROVARI


My eyes and ears are everywhere in the industry.  Vaporjoes always brings you the goods!

Coming Soon.

Provape will be unveiling a new Provari.   They have finally taken the plunge and are coming out with a new variable wattage version.  My sources tell me that this will be a 24 watt board and have a completely different display.    The top cap will be interchangeable so you can have different looks.  This is 100% confirmed by multiple sources. 

Be on the look out here for pictures as soon as I get them.


Discussions have been on going about this here:


http://vapingunderground.com/threads/new-evolv-board-and-provari.3278/

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

SEXY IN COPPER: THE TUGBOAT RDA – $12.34 SHIPPED FROM THE USA

The Tugboat RDA replica is now available in Copper! 

For $12.99 and shipped from the USA – a stunning deal!  

The legit version costs $99.00.. ROFL


THE HARD COPY:

  • Comes with an engraved and serialized drip tip.
    Stainless Steel Construction
    22mm outer diameter
    3 post design
    Huge juice well
    Flush mounted cap
    Huge air hole so most likely no air hole drilling required
    Comes with 1 Tugboat Drip Tip ($25 Value)
    Heat resistant drip tip with serial and Tugboat engraving
    Engraved with Tugboat and American Flag

WHERE: >> HERE <<

USE COUPON CODE 5OFF TO BRING THE TOTAL TO $12.34

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

12 HOURS ONLY: KANGER AEROTANK GIANT 26650 – $31.94 FREE SHIPPING

 http://www.pimped.info/click/click.php?id=274


 

The monster is now live and these ROCK!   I was lucky enough to get a pre release a week early. The best aerotank you can get.  These are purpose built for a 26650 mod.  With the sub-ohm heads these will work GREAT on a mechanical or variable wattage 26650.

THE HARD COPY:

The Kanger Aerotank Giant is the accumulation of all the best things from the Protank and Aero series. Like its predecessor, this clearomizer comes with food grade stainless steel, pyrex glass, and dual coil heads. The Kanger Aerotank Giant also comes with an upgraded airflow control base to really maneuver blasts of flavor. This genuine Kanger Aerotank Giant should be the go to for any serious vapor! 

The Aerotank Giant includes:

    • Upgraded Kanger airflow control base
    • 510 threading
    • 4.5 mL mL capacity
    • Pyrex tank and stainless tube (glue free)
    • Bottom dual coil atomizer heads

Airflow Control: Turn the air control valve at the base of the tank clockwise to decrease airflow. To increase airflow, turn the air control valve counter-clockwise. 

Package contents: 

  • 1 x Kanger Aerotank Giant (Pyrex tank, top cap, bottom cap and Airflow control 510 base)
  • 1 x Stainless tube
  • 1 x Glass tube
  • 1 x 510 drip tip
  • 2 x dual coil 2.0 ohm atomizer heads

WHERE: >> HERE <<

SUB-OHM HEADS: >> HERE <<
 
$31.94 + FREE SHIPPING

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

July 27, 2014

EVEN LOWER: THE PLUME VEIL LOGOLESS RDA REPLICA – $19.99

http://bit.ly/1tQtEFB

 


Just a few short weeks after release this very popular atomizer has been replicated.  

This version is 100% logo free to appease the logo gods.

We encourage others to go logo free.


THE HARD COPY:

22mm diameter
High-quality stainless steel construction
Delrin insulator at top, holds in heat and contributes to amazing flavor
Four-post design, very easy to build on
Negative posts machined out of the deck, for the best conductivity and posts will never turn or move
Gold-plated base and 510 connection, for unmatched conductivity
Adjustable cyclops-style airholes on side
Adjustable secondary airflow, bringing air through the negative posts behind the coils
Adjustable top-cap airflow, creates a vacuum effect increasing both airflow and flavor

Package Contents: 

1 x  RDA
1 x  Drip Tip
1 x  Wooden Gift Box


WHERE: >> HERE <<

$19.99
SHIPS OUT OF THE USA

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

TAKE 10% OFF All Provaris (Clearance Included) TODAY ONLY

You’ve heard the buzz, you know the reputation… no intro is required. The Provari is the device that set the benchmark that all Variable Voltage devices are compared against. Solid, heavy, well made and unmatched for quality and reliability.

And now, there’s a lot of selection of brand new Provaris, both standard and mini to choose from! Choices include the limited edition Dragon Provari (usually only available in store from dealers!) and the gorgeous Gold ZenKote™. Don’t let the term “blemished” put you off– most owners are hard pressed to find the “blem”!

WHERE: >> HERE <<

USE COUPON CODE GOLDDIGGER TO TAKE 10% OFF YOUR TOTAL ORDER

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

BUILT TO QUAD – UNIQUE DESIGN: NUCLEAS 1:1 REPLICA RDA – $12.85

http://shrsl.com/?~64l5
The reviews are in. Users of this 1:1 replica are impressed. We were intrigued by the unique design. The Nucleus styled atomizer takes a different approach to positive and negative posts. The center post section is completely removed to build it, giving you all the room in the world to maneuver and tweak. The top section offers two positive connections, and the bottom section is your negative connections. When built the entire section is replaced and held in place by the single large-head screw. Six air-holes in the outer cap can be lined up with either four or two holes in the inner cap. Some users are indicating they would like more airflow for the aggressive quad builds. This blogger suggests that adding a single center air-hole on the inner ring would allow you to utilize all six of the holes on the cap. A simple solution that doesn’t risk chipping or scratching the finish on the cap. Constructed of stainless steel with 24K gold plated brass components.

THE HARD COPY:

  • 1:1 clone
  • 22mm diameter
  • Removable 510 drip tip
  • Dual-coil or quad-coil setup
  • Air flow control, with 6 air holes on the sleeve
  • Silver plated brass top cap, with CNC engravings
  • Laser engraved serial number on the bottom
  • Height without drip tip: 25.5mm
  • 510 threaded connector

WHERE: >> HERE <<

$12.85

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

USA DEAL: TWO SONY 30AMP / 2100MAH 18650s – $15.84 + FREE SHIPPING

http://bit.ly/1nJhkFQ

 

The 4th incarnation of the Sony 18650.
Terrific for sub-ohm builds, these Sony US18650VTC4 18650s are rated to 30 Amps. 
These have great ratings.  The price rocks for a USA seller – this price includes free shipping!

 

THE HARD COPY:

 

Sony US18650VTC4 18650 30A Drain Unprotected Lithium Ion Flat-Top Battery
The Sony VTC4 battery is perfect for any 18650 compatible devices. Additionally these batteries are a great choice for experienced vapers using sub-ohm coils. 

Features:

  • 3.6 Volt
  • Cut-off Voltage at 2.5 Volts
  • Fully Charged at 4.2 Volts
  • 30A Drain
  • 2100 mAh
  • Flat-Top Battery
  • Safe Chemistry

WHERE: >> HERE <<

$15.84 free shipping

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

July 26, 2014

ROLLOUT: THE KRYPTONITE 22650 / 18650 MECHANICAL – $52.24

 

The true meaning of beauty and the beast.  
A very beautify mod, but massive in size and weight.

The Kryptonite is a thick and heavy duty piece that looks very unique. This mod is made with both Stainless Steel and Brass to achieve an amazing look. It can fit either a 26650 or an 18650 with the provided battery adapter. The pins are silver coated copper for low voltage drop. The top pin is spring loaded that automatically adjusts with your atomizers. This mod weighs over 1lb, so if you’re looking into building some muscle while vaping, this mod is for you.

THE HARD COPY:

 -height 114mm
-diameter 34mm
-3mm lower tube thickness
-1.5 upper outer tube thickness
-2mm upper inner tube
-design diameter 36mm
-made of 304 stainless and brass
-2 tone mod for elegant look
-serialize, engraved logo and design
-12 working hours machine work
-positive 10mm silver coated contact
-negative 12 mm silver coated contact
-fits 26650 and 18650 battery
-delrin insulator
-spring loaded auto adjust positive contact
-510 thread
-locking mechanism
-all materials came from solid brass shaft and stainless

WHERE: >> HERE <<

USE COUPON CODE 5OFF TO BRING THE TOTAL TO $52.24

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone