July 20, 2014

THE KANGER MEGA AEROTANK – $24.99 + FREE SHIPPING

 

 
This is their answer to the Aspire Nautilus tank and the reviews are really good.     These come with both Pyrex and stainless steel tanks which is a nice bonus.
 

The Kanger Mega Aerotank is the accumulation of all the best things from the Protank and Aero series. Like its predecessor, this clearomizer comes with food grade stainless steel, pyrex glass, and dual coil heads. The Kanger Mega Aerotank also comes with an upgraded airflow control base to really maneuver blasts of flavor. This genuine Kanger Aerotank Mega should be the go to for any serious vapor!

The Aerotank Mega includes: 

  • Upgraded Kanger airflow control base
  • 510 threading
  • 3.8 mL capacity
  • Pyrex tank and stainless tube (glue free)
  • Bottom dual coil atomizer heads

 

Airflow Control: Turn the air control valve at the base of the tank clockwise to decrease airflow. To increase airflow, turn the air control valve counter-clockwise. 

Package contents: 

  • 1 x Kanger Aerotank Mega (Pyrex tank, top cap, bottom cap and Airflow control 510 base)
  • 1 x Stainless tube
  • 1 x Glass tube
  • 1 x 510 drip tip
  • 2 x dual coil 2.0 ohm atomizer heads

WHERE: >> HERE <<

USE COUPON CODE YEAHBABY TO BRING THE TOTAL TO $24.99
FREE SHIPPING ON ALL ORDERS

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

FULL SETUP: THE PANZER MOD / PANZER DRIPPER / DRIP TIP – $28.13

It’s a hot looking setup! We’re talking about the Panzer Styled Kit including a Black Panzer styled mechanical mod and matching rebuildable dripping. With the familiar styling of the Panzer, this dripper is the perfect mate to complement the mod, and the included OSO styled drip tip finishes the setup off beautifully.

Atomizer features three drilled posts make various builds a snap, and the deep juice well will keep thirsty coils well fed.

Mod features brass contacts, an adjustable positive pin, bottom spring-loaded switch with reverse-threaded locking ring, and the ability to house any 18-series battery with the use of the various tube pieces.

All for a great low price!

WHERE: >> HERE <<

$28.13

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

July 19, 2014

JUST THE TIP: FOUR KINGS STYLED INSULATED DRIP TIPS – 2 FOR $3.57

Made to complement any setup, these insulated metal hybrid drip tips combine a standard metal drip tip with laser engraving that can be used on its own or paired with the clear base. 

Available in silver or gold color, each drip tip comes with a clear cap to keep dust or lint OUT of your tip and atomizer.  A really neat idea!

Get them separately for $2.06 each, or opt for the economical 2-pack with one of each color for only $3.57 for both. 

WHERE: >> HERE <<

$3.57

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

(UPDATED LOWER PRICE): THE “CHI PLUME” RDA – $24.95 FS


The evil clone empire has been working over time.  

Just a few short weeks after release this very popular atomizer has been replicated.  

This version is 100% logo free to appease the logo gods.

We encourage others to go logo free.


THE HARD COPY:

22mm diameter
High-quality stainless steel construction
Delrin insulator at top, holds in heat and contributes to amazing flavor
Four-post design, very easy to build on
Negative posts machined out of the deck, for the best conductivity and posts will never turn or move
Gold-plated base and 510 connection, for unmatched conductivity
Adjustable cyclops-style airholes on side
Adjustable secondary airflow, bringing air through the negative posts behind the coils
Adjustable top-cap airflow, creates a vacuum effect increasing both airflow and flavor

Package Contents: 

1 x  RDA
1 x  Drip Tip
1 x  Wooden Gift Box


WHERE: >> HERE <<

$24.95 + FREE SHIPPING
SHIPS OUT OF THE USA

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

COPPER DROP: THE AR MECANICAL REPLICA – $33.16

http://shrsl.com/?~62zf
This AR style mechanical has just gone live at a great price.  Its unique design has made it a very popular device.  This version is in pure copper and is extremely sexy and of course a hard hitter!   Great Great price for an epic device.

THE HARD COPY:

  • Hollow-out design
  • 510 threading connection
  • Adjustable 510 center pin
  • Copper contacts
  • Positive contact is adjustable
  • Magnetic bottom firing button, without locking ring
  • Houses single 18650 battery (battery sold separately)

WHERE: >> HERE <<

$33.16

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

July 18, 2014

MINI ME: THE PURE COPPER MINI NEMESIS – $18.99 FROM THE USA

Here is a great deal on the pure copper mini nemesis replica.   
This is a hell of a price coming from a USA vendor!   I really great 14500 mod!

Currently cheaper then China vendors!


THE HARD COPY:

  • Full Copper Body
  • 14500 Battery (not included)
  • Copper Contacts
  • Bottom fire Button

WHERE: >> HERE <<

USE COUPON CODE 5OFF TO BRING THE TOTAL TO $18.99

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

DUAL 26650: THE CONGESTUS MECHANICAL – $37.34

http://shrsl.com/?~62pr
Dominating over other mods with a height extending over 176mm and a diameter exceeding 32mm, the Congestus replica makes the statement that you are serious about vaping.  

The Congestus is a dual 26650 mechanical for those looking for a epic vape.  You can also use a single 26650. This is made of solid stainless steel with copper contacts.    

THE HARD COPY:

  • Constructed from Heavy-Duty Stainless Steel
  • Locking Side-Firing Switch
  • Copper Contacts
  • Adjustable Positive Post
  • Telescopic Design<
  • Uses One 26650 Battery or Two 26650 in Series
  • Deep Drip Well in Top Cap
  • Laser Engravings
  • Serialized
  • Top Cap Diameter: 32.5mm
WHERE: >> HERE <<

$37.34

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

THE SOLDADO ATOMIZER REPLICA – $14.99

The Soldado Atomizer replica is made from the ground up for your exotic builds.   With two very large juice wells this atomizer will hold a nice a lot more juice than your standard atomizer.  The teardrop style airflow hole will allow the user to precisely adjust how much airflow they will get. A really really nice atomizer for just $14.99.   Shipped from the USA.

THE HARD COPY:

  • 304 SUS
    22mm outer diameter
    5-terminal (4 negative, 1 positive)
    2x juice wells
    O-ringless air flow control ring
    Custom Teardrop air hole
    Peek top insulator
    Delrin white bottom insulator
    Precise machining
    510 threaded

WHERE: >> HERE <<

$14.99

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

July 17, 2014

INNOKIN YOU’RE TOO LATE: THE SVD 2.0 w/ EVOLV DNA20?

Who called it?? Yet again Vaporjoes sources were correct. 

Here is the latest wattage mod from Innokin The SVD 2.0. Innokin opted to go with Evolv and use the DNA20 chip.    
Innokin has now moved into a new sub-market.  This is the DNA style sub-market were they are judged completely different.  Innokin has always been in a world of their own – but when they go toe to toe with other DNA / CHNA makers – this product is DOA!

Let me breakdown why this was a TERRIBLE move on the part of Innokin. 

THE BAD:

STRIKE 1:  No innovation by Innokin

We always gave Innokin a pass on its lower power because they had such great style, form, and function. This is just a plain tube with what looks like plastic buttons.  They are banking on the Evolv name to push this mod.  To me this seemed like a good way for Evolv to get rid of a ton of DNA20 tech.   This style and wattage limit HAS BEEN DONE TO DEATH.

STRIKE 2:  It will probably be expensive

Let’s face it  – we’re looking at an Evolv chip and consider Innokin’s past prices on mods. 
It will be more expensive than any more powerful 30 watt tube or box mods coming from China.  
Don’t forget this mod is still ALL China. The brain is USA but its only as good as its weakest part.
They would need to price this well under $79.00 for it to be viable.

STRIKE 3:  Enter the new darling of regulation – The Box Mod

The latest rage in regulated (i.e SX chips, Raptor, etc) is the box mod.  There has been a huge shift. Mod makers can do more and fit more batteries in that form factor.  You don’t need a CnC machine or Lathe to make a solid box mod.   

STRIKE 4:  UGLY
  
I’d love to know who gave the OK on this mod.  Ugly as the day is long. 
This can now be sold in both ecig and adult toy shops around the world – and fit right in.
I guess the “D” in the DNA20D stands for … well you figure it out 🙂

STRIKE 5: Already Cloned at 30 Watts

KSD already has come out with a CHDNA 30 VAMO that is far better looking,  probably cheaper, and has 10 more watts of power. Technically – wouldn’t that make this mod a clone because KSD was first to release?   CHECK IT OUT HERE



THE GOOD:

1.  Innokins highest wattage to date.

This is Innokin’s highest wattage mod to date, which gives a little more power to the vaper coming from the ego battery.  
In this day and age – it’s an entry level wattage mod.

2.  SOME quality

Though just a plain, ugly, and boring tube mod – this has both Evolv and Innokin names on it.  
This means it will have SOME quality behind it.  Which is important to many. 

In my opinion this mod is dogs breakfast in terms of the online vaping community.   This is geared more for the B&M shops.  In the end I see this being a simple metal casket for the DNA20 chip to rot in – very few will buy it. 

An ironic ending…. The USA DNA20 gasps its dying breath in a Chinese mod.

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

ROLLOUT: KEG CAP VERSION 2 + FREE JUICE – $29.99

http://www.vapordna.com/ProductDetails.asp?ProductCode=AC0219&Click=98
The Keg Cap version 2 has landed!

After Roughly Four Month of Designing and Engineering, KEG V2 Has Finally Arrived! Well Sought After, Well Machined, Unreal Performance!

Made In USA

Major Improvement Over Keg V1:

  • No More Replacement O-Rings For IGO-W, Nimbus and Helios, One Size Fits ALL!
  • Keg V2 covers entire diameter of the base, so now fits 100% Flush!
  • EVEN BIGGER BORE! The biggest bore in vaping to date! Even Bigger than the base of the 510!
  • Much Improved Airflow, much more than Keg V1. Keg V2 gives you approximately THREE 5/64 holes on each side of the cap for maximum cloud chasing!
  • Comes with 1 black delrin that functions as your drip tip, giving you the BIGGEST BORE possible, bigger than anything we have seen!
  • Comes with 1 black delrin adapter to fit mosts of your standard 510 drip tips
  • Keg V2 Monster Bore Drip Tip and 510 Drip Tip Adapter are both made out of black delrin, which is very heat resistance
  • Just like the Keg V1, The V2 is Proudly Made In USA!
  • Now you can transform your ordinary IGO-W, Nimbus or Helios into something truly extraordinary!


Epic Feature: EVEN Bigger Belly Bore
The inner diameter is wider than the outer diameter of a 510.
 

The Keg is compatible with 3 different atomizers: IGO-W, Nimbus, Helios.


What’s Included:

1 – 2 Piece Keg Top Cap
1 – Black Delrin Monster Bore Drip Tip
1 – Black Delrin 510 Drip Tip Adapter

WHERE: >> HERE <<

$29.99 + FREE JUICE

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

ROLLOUT: THE ITASTE 134 MX-Z ZODIAC

The Itaste 134 MX-Z Zodiac.   This is a new mod by Innokin.

Its going to be interesting to see if this mechanical mod can make an impact a market that seems to be moving back to high wattage regulation / unregulated box mods.

THE HARD COPY:

The 134 MX-Z is built in the same durable, eye-catching style as the iTaste 134 and has Zodiac constellations engraved on the inner sleeve.

Silver plated firing pins give the 134MX-Z maximum power as well as adaptable top pin connectivity through an advanced new spring adjusted top pin that adjusts to 510 connector pins of varying heights.

The 134MX-Z is designed with a unique advanced safety feature which adds convenience and your own personal style to the firing system. After selecting your preferred Zodiac symbol from the 12 starsigns, the rotational wheel is used to lock or unlock the 134MX-Z; only when your chosen Zodiac is selected the unit will fire.

The 134MX-Z has replaceable parts and is designed for long term use with a Golden Spring and white plastic selection wheel included in the kit.

The advanced features, high quality build and long term durability will make the 134MX-Z ‘Zodiac’ a favorite with vapers throughout the universe.


WHERE: >> HERE <<

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

SIZZLE: MNKE 26650 – 20A/60A BATTERIES w/ CASE – 2 FOR $12.88

http://shrsl.com/?~62im
http://shrsl.com/?~62im
The gold standard of the high amp 26650 batteries is the MNKE 26650.   These have been a tried and true battery for years.   Now being offered at a great price.

Great for both your mechanicals with sub-ohm builds and variable wattage devices like the Seven-22.

This is a great price for those looking to resell as well.

THE HARD COPY:

MNKE batteries are the definitive battery for the mechanical-mod user.  Not only are these the safest batteries available, they also perform better for a longer period of time.  The high amp-limit on these batteries means you can build sub-ohm coils without fear of the batteries venting.  These are 3500mAh batteries, and can hold a charge above 3.7-volts for much longer than other IMR batteries, which means hours of use before a noticeable difference in voltage compels a battery change. These batteries will perform just as well in an APV or Variable Voltage/Variable Wattage mod, although the advantages won’t be as apparent. If you like to build your own sub-ohm coils on a mechanical mod, you won’t believe the performance and battery life these cells offer.

Specifications:

Brand Name: MNKE
Size: 26650
Type: Li-Mn (High Drain)
Rated Capacity: 3500mAh
Nominal Voltage: 3.7V
Peak Voltage: 4.2V
Rechargeable: Yes
Protected: No
Chemistry: Lithium manganese Dioxide (Li-Mn02)
Style: Flat Top
Color: Orange
Maximum Continuous Discharging Current: 20 A
Maximum Pulse Discharging Current: 60 A
Maximum Continuous Charging Current: 6.5 A


WHERE: >> HERE <<

USE COUPON CODE BLF TO BRING THE TOTAL TO $12.88

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

July 16, 2014

EPIC: 30 WATT CHI-DNA STAINLESS STEEL TUBE MOD BY KSD – $59.45

http://www.shareasale.com/r.cfm?u=719137&b=437122&m=44775&afftrack=&urllink=www%2Efasttech%2Ecom%2Fproducts%2F1%2F10008269%2F1793207%2Dksd%2D7w%2D30w%2Dvaraible%2Dwattage%2Dmod
THE NEW 30 WATT VERSION

As expected this mod is going to VERY popular!   Normally a DNA tube mod would cost you about $250.00 – now you can get it for just $59.86.  I made sure to pick one up before pimping this deal.


THE HARD COPY:

  • 510 threading connection
  • Removable beauty ring
  • 0.95″ OLED display shows battery level, volts, watts and ohms
  • Variable Wattage – can be adjustable from 7W to 30W (in .1W increments)
  • Houses single 18650 battery (battery sold separately)
  • Lock function (quickly click fire button for 5 times)
  • Overtime vaping warning (10 seconds switch cutoff)
  • Screen auto close without operation for 5 seconds
  • Atomizer resistance detect (0.5ohm-3.3ohm)
  • Reverse polarity protection
  • Low resistance warning
  • Low voltage warning
WHERE: >> HERE <<

$59.46

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

LOWER PRICE: KANGER AEROTANK GIANT 26650 – $34.99 FREE SHIPPING

 http://www.pimped.info/click/click.php?id=274
They just hit me up with an even lower price!

The monster is now live and these ROCK!   I was lucky enough to get a pre release a week early. The best aerotank you can get.  These are purpose built for a 26650 mod.  With the sub-ohm heads these will work GREAT on a mechanical or variable wattage 26650.

THE HARD COPY:

The Kanger Aerotank Giant is the accumulation of all the best things from the Protank and Aero series. Like its predecessor, this clearomizer comes with food grade stainless steel, pyrex glass, and dual coil heads. The Kanger Aerotank Giant also comes with an upgraded airflow control base to really maneuver blasts of flavor. This genuine Kanger Aerotank Giant should be the go to for any serious vapor! 

The Aerotank Giant includes:

    • Upgraded Kanger airflow control base
    • 510 threading
    • 4.5 mL mL capacity
    • Pyrex tank and stainless tube (glue free)
    • Bottom dual coil atomizer heads

Airflow Control: Turn the air control valve at the base of the tank clockwise to decrease airflow. To increase airflow, turn the air control valve counter-clockwise. 

Package contents: 

  • 1 x Kanger Aerotank Giant (Pyrex tank, top cap, bottom cap and Airflow control 510 base)
  • 1 x Stainless tube
  • 1 x Glass tube
  • 1 x 510 drip tip
  • 2 x dual coil 2.0 ohm atomizer heads
WHERE: >> HERE <<

SUB-OHM HEADS: >> HERE <<

USE COUPON CODE YEAHBABY TO BRING THE TOTAL TO $34.99
FREE SHIPPING ON ALL ORDERS

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

A FEW WEEKS LATER: THE “CHI PLUME” RDA – $29.95 FS


The evil clone empire has been working over time.  

Just a few short weeks after release this very popular atomizer has been replicated.  

This version is 100% logo free to appease the logo gods.

We encourage others to go logo free.


THE HARD COPY:

22mm diameter
High-quality stainless steel construction
Delrin insulator at top, holds in heat and contributes to amazing flavor
Four-post design, very easy to build on
Negative posts machined out of the deck, for the best conductivity and posts will never turn or move
Gold-plated base and 510 connection, for unmatched conductivity
Adjustable cyclops-style airholes on side
Adjustable secondary airflow, bringing air through the negative posts behind the coils
Adjustable top-cap airflow, creates a vacuum effect increasing both airflow and flavor

Package Contents: 

1 x  RDA
1 x  Drip Tip
1 x  Wooden Gift Box


WHERE: >> HERE <<

$29.95 + FREE SHIPPING
SHIPS OUT OF THE USA

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone