November 22, 2013

USA MADE: 15ML OF LIQUID FOR $4.49





So why is this a deal when its only 10% off?  MtBakervapor is probably the lowest priced American made juice going.  Any discount is just icing on the cake.  I have bought a ton of juice from Mtbakervapor and they are a rock solid juice company.  I love his Solar Flare, Hazelnut, Butterscotch Tobacco, Tobacco Leaf, Coconut, and Ecto Cooler to name a few.  

They also have extensive customizations for all their juice.

15ml – $4.49
30ml – $6.79
50ml – $10.12

WHERE: http://www.mtbakervapor.com/

THE DEAL:
Use coupon code ve10 to take 10% off your total order (works on hardware too).

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

3 WAY: JM MECHANICAL REPLICA WITH ALL 3 TUBES – $17.71



Here is a fantastic deal on a nice mechanical.  This mechanical comes with all 3 battery tubes.  The mechanical has brass contacts with a bottom firing button.  Made of a brushed stainless steel.

THE HARD COPY:

  • Random serial number 
  • No circuit board, full mechanical mod
  • Brushed stainless steel body
  • Telescopic 510 center pin (brass)
  • Spring-loaded firing button
  • Bottom locking ring
  • 22mm external diameter  
  • Recessed 510 threading connector
  • Compatible with any device with 510 connector
  • Powered by 1*18350 battery/1*18500 battery/1*18650 battery 

WHERE: http://www.fasttech.com

$17.71 + FREE SHIPPING


submit to reddit

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

BLOWOUT: BLACK BOLT – $15.19


The bolt is a tried and true 3.7v tube mod.  They have been out for years and have a good track record.  Normally around $35-$50.00 – this deal is a STEAL. I own a few bolts and they have never let me down.  Great starter or additional mod.

THE HARD COPY:

A new mod at MadVapes. This has a similar look and feel as a RoughStack except that it has a side mounted horn switch. It is made of aircraft grade aluminum and polished to give it a great finished look. It is designed to hold an 18500 3.7 volt button top battery. The Bolt is just shy of a 1″ diameter and has a length of about 3 3/4″.

WHERE: http://www.madvapes.com/

THE DEAL: 
USE COUPON CODE lovetovape5 TO BRING THE TOTAL TO $15.19


submit to reddit

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

THE PULSE-G GENESIS REPLICA – $12.73

The Pulse-G collectable replica has went live on Fasttech.  A genesis style that has a removable chamber reducer.  This helps make your flavors come alive!    Made of Stainless Steel and uses a glass tank.  I bought 2 for the Zombie Apocalypse box.

THE HARD COPY:

  • Genesis style RBA
  • Reduced chamber design
  • Hidden dual coil configuration
  • 2 opposite air holes
  • Replaceable glass tank
  • Bottom adjustable 510 center pin
  • Diameter of filler hole: 2.0mm (approx.)
  • Diameter of wick hole: 3.0mm (approx.)
  • 22mm overall diameter

$12.73

submit to reddit

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

ROLLOUT: ANGO R80 – TELESCOPIC SIDEWIDER / PIPE MOD

EGO CONNECTOR FOR CLEAROMIZERS




UPDATE ON THE NAME:  ANGO R80 

Here is a very very cool looking mod I was sent photos of.   Its a Telescopic sidewinder style mod that also doubles as an epipe!  Im sure there is a wire going from the button to that 510 connection so it wouldn’t qualify as a mechanical.   Either way I think its an awesome design!  Im sure they will be in the same price range as the K100/K101.

Vendor said they were from: http://ecigs-factory.com

Vendors and CoOps – have at it.

submit to reddit

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

PRICE WAR: THE CHI-METHEUS (Prometheus) – $29.99

Chi-metheus


Venerable Vaping has dropped the gauntlet and dropped the Chi-metheus at $5.00 cheaper than anyone else.  A very sexy RBA TANK!  A steal at this price..


THE HARD COPY:

It features a copper pin, an adjustable airflow ring that is locked in place by tightening the top cap. Its design has one positive post, and two negatives, which accommodates the building of multiple coil configurations. 


The top post is slotted for easy application of coils (micro or otherwise) 
Wick holes are similar in size to the turbine atty.

The air flow controls on this are full of options.

WHERE:  http://www.venerablevaping.com

$29.99

submit to reddit

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

November 21, 2013

FULL MONTY: THE K101 KIT (TONS OF EXTRAS) – $36.99

Here we have a huge mechanical kit at a great price!  This kit has everything you will need plus even more extras!  The K101 is just like the K100 (AKA Chempire) but with a different look. In your choice of many different colors.

WHATS IN THE KIT?

  • 1 x K100 Mechanical Telescoping Mod Device 
  • 1 x 18650 2000mah 3.7v Battery
  • 1 x 18350 900mah 3.7v Battery
  • 1 x Adjustable Battery Charger
  • 2 x 510 Cartomizers (1 pre-installed)
  • 1 x Color Matched Cartomizer cone
  • 1 x Stainless Steel Calabash Drip Tip
  • 1 x Blue zipper pouch
  • 1 x Battery fuse

All that for under $40.00 is a STEAL

WHERE: http://101vape.com/

$36.99
BONUS: $1.99 FLAT RATE SHIPPING

submit to reddit

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

IN FORCE: THE NIMBUS REPLICA – $5.23



The Nimbus replica


 

Simple – Clean – Built Well – Affordable!

Something we haven’t done in a while.. a simple dripper.

Looking at the picture above it almost makes you wonder if the same factory makes the real thing (cough).  Very well built – they rock for the that low price!

Stainless Steel
3 Post system for Dual Coils
Laser Etched “Pattern”


WHERE: http://www.fasttech.com

$5.23

submit to reddit

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

(UPDATE) AT YOUR OWN RISK: MTBAKERVAPOR PULLS ALL CINNAMON FLAVORS

Is that the reading rainbow van?


One of the largest ejuice makers in the world has decided to pull all juices containing cinnamon.  Some recent studies and articles have stated that cinnamon may be toxic when vaped.  The mere mention of toxic in the vaping community can bring a slew of liability issues for juice makers and their insurers (if they have one).

Will this be a growing trend? Let the discussion and debate begin.. 

LOCATION OF THE FINDINGS CAN BE FOUND HERE 

This shows some real dedication by this juice company.  Cinnamon flavors are very popular and  they stand to lose a ton of sales.   This just one example of how the vaping community is very capable of policing and regulating itself.  Hats off to Mtbakervapor for this bold move.


MT BAKERS STATEMENT: 

Here at Mt Baker Vapor we have been following the recent studies about Cinnamon flavors very closely. At this time we do not have enough information to make a statement on the issue either way. At this time we have decided to remove any flavors that contain Cinnamon while we continue our research. Our biggest concern is our customers and their health. We will keep you all posted on this situation. Please feel free to contact at [email protected] if you have any comments, questions or concerns.

When a juice maker that fills thousands of bottles a day does this – you should listen.

Taken from their Facebook page


24 hours later the establishment responds.

UPDATE 11/21:   
ARTICLE OPPOSING THE SCIENTIFIC STUDY

UPDATE 11/21:
THE VAPING GREEK RESPONDS TO THE STUDY

MY VIEW:
I am not a scientist and have no opinion on the toxicity of cinnamon.  What I DO agree with is a juice maker being extra cautious.  Some would call that panic on their part, I call it good business.  Looking after your customers can only be positive.  After all — we ARE putting these things in our body.  More research is needed.

submit to reddit

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

November 20, 2013

EMAX: SMOKTECH BRINGS VARIABLE WATTAGE TO AN EGO

Smoktech Emax Ego Battery



Its finally happened — variable wattage in an ego design.   Meet the new Smoktech Emax.    Smoktech is stepping up their game and leapfrogging ahead of Joyetech. 

These will come in 650 / 900 / 1100 / 1300 mAh battery sizes

It has 2 modes to switch. One is the variable voltage mode which can adjust from 3.2V to 4.8V. the other is variable wattage mode, in this mode, the wattage can be adjusted from 4.0 to 14W.  Some say only 12 watts, I’m inclined to believe the lower number.

Let the CoOps and Pre Orders begin!

WHERE:  http://www.alibaba.com/

 
submit to reddit

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

SPACE AGE: THE SIGELEI LEGEND – GRAVITY SENSING MOD – $56.80

Sigelei Legend Variable Wattage Mod

The Sigelei Legend is live.   A lot cheaper then I expected.  These are a Evic style mod with a gravity sensing system.   These were originally going to be over $100.00 ea – until Sigelei realized how suicidal that was.  These are very interesting and Ill be picking one up to check out. 

THE HARD COPY:

  • Variable wattage – can be adjustable from 3.0W to 15.0W (in .1W increments)
  • Variable voltage – can be adjustable from 3.0V to 6.0V (in .1V increments)
  • Features a 5 click On/Off switch
  • Large-Size OLED screen shows:(resistance, voltage/wattage, settled vaping time, battery level and puffs)
  • Gravity sensing system
  • 5-20 seconds cutoff
  • Short circuit protection
  • Low voltage warning
  • Reverse polarity protection
  • Removable top cap
  • Floating 510 center pin
  • 510&eGo threading
  • Compatible with 1*18650 unprotected battery (batteries sold separately)

$56.80

submit to reddit

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

LIVE: POLISHED STAINLESS STEEL PROVARI


Polished Stainless Steel Provari – Limited Edition



Provari has released a 2nd round of their polished stainless steel edition of the Provari 2.5.   These are expected to be highly prized due to the “shiny” factor.   These will be a very limited edition run.

This will be the last run before Christmas.  Last run sold out the same day.



THE HARD COPY:

 ProVari™ Polished Stainless Steel E-Cigarette V2.5
If you’re looking for the highest quality and best looking electronic cigarette, the ProVari is the right choice!

• Polished Stainless Steel ProVari variable voltage electronic vaporizer.

The ProVari Polished Base Model Includes:
• 1 ProVari™ Polished variable voltage electronic vaporizer. New Design
• 510 Atomizer Connection



Features of the ProVari Polished SS Electric Cigarette:

• Microprocessor controlled
• 2.9-6.0 variable voltage range with .1 volt increments
• Built-in digital display
• AccuSet™ Technology – Self-Calibration Feature
• Atomizer Ohm’s checker built-in
• Battery voltage checker built-in
• Translucent light-up pushbutton with low battery indicator
• Single battery design
• Stock 510 Connection
• Classy looking and made of stainless steel
• 16 second safety cutoff
• Short circuit protection
• Reverse battery protection
• Thermal monitoring system
• Amperage limiting
• Battery monitor and over-discharge protection
• Machine engraved logo
• Vented for added safety
• Proudly made in the USA
• 1 Year warranty with optional 2 year warranty
• Measures – 4.1″ L X .90″ Dia.(without atomizer)
• Weight – 4.2 ounces (without battery)



WHERE: http://www.provape.com

BONUS: 1 YEAR WARRANTY

submit to reddit

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

THE LAUNCHER REPLICA V2 – $19.66

The Launcher V2 – Stainless Steel and Copper Contacts

A very good looking mod….

Inspired by a Pinoy mechanical, the Launcher Replica is a bottom-firing, telescopic mechanical mod with stainless steel body, and copper contacts.  This version has logoing on the body and bottom button. 

THE HARD COPY:

  • Polished stainless steel 
  • Top cap with air-channels cut 
  • Adjustable 510 center pin (copper)
  • Telescopic tube
  • 4 well-aligned vent holes
  • Copper contacts
  • Black Derlin insulator
  • Spring-loaded bottom firing switch
  • Recessed 510 threading connector
  • Powered by 1*18350/1*18500/1*18650 (batteries sold separately)


WHERE: http://www.fasttech.com

$19.66 + FREE WORLD WIDE SHIPPING

submit to reddit

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

MECHANICAL BLOWOUT: SIGELEI #20 VERSION 1.5 – $14.99


I was going to put this deal up earlier but I didn’t want to mislead my readers with the wrong picture.  These are a unique version of the Sigelei #20 and an unbelievable price!   These are an upgrade to the original #20 with a improved spring and button.

THE HARD COPY:

An awesome vaping machine! This is the Sigelei#20 Telescoping Mechanical Mod. The Sigelei#20 Telescoping Mechanical Mod is beautifully machined out of Solid Stainless Steel and nicely finished. Just Gorgeous!!! Looks, feels, and performs like a really high end piece.

Sigelei#20 Telescoping Mod Features:

Top side stainless steel fire button. Fire button rotates to on and off position.

Accepts 18350, 18490, 18650 IMR batteries.


WHERE: http://101vape.com/

$14.99 

submit to reddit

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

November 19, 2013

LOW: TELESCOPIC PROMOD+ STAINLESS STEEL – $19.99 FREE SHIPPING

ProMod+ Stainless Steel Mechanical



Here is a great deal on a good basic mechanical.   This mechanical is telescopic, bottom firing, and made of stainless steel.    This mod is only $19.99 and free shipping from a USA vendor.  A great deal!

Features Include: 

* Stainless body
* High quality mechanical parts 
* Mechanical bottom button
* Safety features such as insulated body and air holes in the main cup
* Telescopic design works with multiple battery sizes
* Mechanical design makes this a very reliable device. No PCB board
* 510 connection 

WHERE: http://www.vaporbeast.com/ 

$19.99 + FREE SHIPPING


submit to reddit

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone