December 8, 2013

PRICE WAR: INNOKIN ITASTE VTR – $64.99


Innokin Itaste VTR

USA VENDOR DEAL – JUST A FEW BUCKS OVER A GROUP BUY.

Ok so if you havent already bought a VTR, you should really think about it.  I have 80+ mods and the VTR is one of my favorites.  Its built EXTREMELY well, works like a dream, and I love the form factor. 


BASIC PARAMETER
 
    Dimension: 22.2 x 54.4 x106 mm
    Maximum Current Output: 5.0 Amperage
    Operating Voltage: 3.0V-6.0V
    Operating Wattage: 3.0W-15.0W
    Battery : IMR high drain 18650 ( without protection )

BRIEF FEATURES

    Variable Voltage: voltage can be adjusted from 3.0 – 6.0 volts in .1 volt increments.
    Variable Wattage: Wattage can be adjusted from 3.0 – 15.0 W in .5 watts increments.
    Short Circuit Protection.
    RMS (root mean square)
    Reverse Battery Protection Circuit.
    Resistive Load Detection ( Ohms meter ).
    ON/OFF battery switch.
    LED Battery Power Display.
    Low Voltage Warning.
    Overtime Vaping Warning (10 second switch cutoff).
    Battery safety protection (Vent holes).
    High compatibility 510 connector:
    Will fit iClear 10, iClear 16, and iClear 30 clearomizers, as well as standard 510                

(from the main page: located 8th row down on the right)

WHERE: http://www.smokefreesource.com

$64.99


Featured on our android app

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

DROP: K100 FULL KIT (LOTS OF EXTRAS) – $32.99

K100 Kit with Batteries



101Vape shows that it can be done!  Prices lower than Fasttech!

Description

You will definitely stand out from the crowd of e-cigs currently on the market with this device as it has a very unique design.

The last e-cig you will ever need to own….the K100 Mechanical Telescoping Mod Kit
No more worrying about batteries failing and leaving you stranded, no more worrying about dropping your e-cig and breaking it, no more worrying about constantly keeping a backup handy or carrying around extra devices. The K100 Mechanical Telescoping Mod addresses all of these issues and much more.

It features telescoping capabilities, which means you can use an 18650 or 18350 battery in the device It also functions via a mechanical operation rather than an electronic switch. What this means is that there are no electronics in the mod (other than the battery itself) that can fail and leave you with a non-working device. Therefore, as long as you can get your hands on 18650 and/or 18350 batteries (which are readily available even outside of the e-cig industry thanks to their use in high-end flashlights etc.) you will always have a working e-cig battery*.

*Well I guess there is the possibility that the device could get damaged in some way that would make it inoperable, but it would take a lot to do so as this is a very sturdy device made almost entirely of high grade aluminum and steel.

Model number K100
Packaging X6/K100 zipper case
Packing size 195*92*48mm

Kit includes:

  • 1 x K100 Mechanical Telescoping Mod Device 
  • 1 x 18650 3.7v Battery
  • 1 x 18350 3.7v Battery
  • 1 x Adjustable Mod Battery Charger
  • 2 x 510 Cartomizers
  • 1 x Color Matched Cartomizer cone
  • 1 x Stainless Steel Calabash Drip Tip
  • 1 x Special Edition Carbon Fiber look Carrying Case – Black


WHERE: http://101vape.com/
 

$32.99

submit to reddit


Featured on our android app

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

HOT: THE AQUA REPLICA – $34.99

  

After a long discussion with the website owner I got this down to $34.99.
One of the most anticipated rebuildables to hit the scene! Get yours at the a great price! 

The Aqua is a Kayfun Style system with 4 wicking channels rather than 2.
 

THE HARD COPY:

Specifications:

– Made with SUS 316 Stainless Steel
– 4-Channel dual coil capability
– Bottom feed silica tank atomizer
– Brass contacts
– Two unique drip tips
– Hybrid connector for the Origin mod
– 510 base connection
– 21mm



WHERE: https://www.c2cvaping.com




Featured on our android app

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

December 7, 2013

BLOWOUT: INNOKIN ICLEAR30S – $3.95

Innokin Iclear30S


INCREDIBLE DEAL! 75% OFF!  – I BOUGHT 10

These are the newest version of the iClears!  Yes your seeing this right.. only $3.95! 

The Innokin iClear 30s Dual Coil tank has a large 3ml capacity, long wicking threads and 360 degree rotatable mouthpiece! And, with replaceable coil heads, more money saved! These clearomizers have the popular 510/Ego threading so they are compatible with all eGo and 510 threaded devices. Dual coils & the wicks are hidden inside the replaceable coil assembly. This new design gives this clearomizer an outstanding throat hit, abundant vapor and superior performance.  The replaceable coil heads make this product affordable & economical.  They are strong and sturdy, with a stainless steel band around the base and screw top mouthpiece.
The iClear 30s Tank comes with a 2.0ohm resistance coil and have a 3.0ml capacity. 
Fits all our eGo e Cig products and come blank ready to fill with your favorite liquid! No syringe needed to fill, just screw the top off, fill with your favorite premium eLiquid, screw the top back on and you’re ready for the best vaping experience ever. These are the best deisign Innokin iClear 30s Dual Coil tanks you can buy, easy to fill, great flavor and vapor, and no leaking.
Holds 3.0ml (4x as much as the normal size cartomizers) of e juice. This is a must have for serious vapers!
Replacement Innokin iClear 30s Dual Coil Heads are available in 2.0ohm. 

Product Comes With:
1 – Innokin iClear 30s Tube Assembly
1 – Innokin iClear 30s Base Assembly
1 – 1.5ohm Dual Coil iClear 30s Atomizer Head
1 – Rotating drip tip



WHERE: http://www.aquavaporcig.com/

Located on the right side under Deal of the Day

$3.95

CHEAP REPLACEMENT HEADS:  HERE


Featured on our android app

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

SIZE MATTERS: THE 70MM (2.35″) DRIP TIP – $1.97 FS

Don’t let the ladies lie.. Size DOES matter.

Here we have the longest drip tips I’m aware of.   These dwarf the stiletto drip tips I’m so fond of.  A full 70mm long (2.35″) – these are almost as long as a short goose neck.  For $1.97 each – its a complete steal!!   I bought the complete set.

This gives new meaning to the word – just the tip.


WHERE: http://www.fasttech.com

$1.97 FREE SHIPPING


Featured on our android app

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

ROLLOUT: KAYFUN LITE / 91% CLONE – REVISION 2 – $39.99 FS



Here is the 2nd revision of the Kayfun Lite / Russian 91% clone.   These are brand new and have some upgrades from the the previous version.     Solid Stainless Steel design.

Upgrades over the previous version:

Improved metal air flow system.
Improved O Rings and Drip Tip.
Improved threading.
Added second tank – added clear and metal tank.

Added Twice the amount of extras.

WHATS INCLUDED:

2 TANKS (METAL AND CLEAR)
4 TOP MOUNTING COIL SCREWS (TOTAL 6)
2 FEELING PORT SCREWS (TOTAL 3)
2 METAL AIRFLOW CONTROL SCREWS (TOTAL 3)
MINI PORTABLE PHILIPS SCREWDRIVER.
AIR FLOW CONTROL SCREWDRIVER.
RETAIL GIFT BOX.


WHERE: http://www.ebay.com


$39.99 FREE SHIPPING


Featured on our android app

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

REBUILD: PORTABLE BUTANE TORCH – $5.37

Every once in a while I bring this back to the blog.  Just to let everyone know its still out there.  This simple pen style torch has been a favorite in the rebuilding community for a while – and for good reason.  Its reliable, portable, and cheap.  As a rebuilder you really should have a torch.  This deal is a no brainer.


THE HARD COPY:

  • Welding, pipeline and removing paint
  • Repairing jewelry, optical instrument and melting frozen lock sets.
  • Flame temperature: 1300℃
  • The flame can be adjusted
  • Great for re-builders

WHERE: http://www.fasttech.com

$5.37 FREE SHIPPING



Featured on our android app

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

December 6, 2013

24 HOURS OFF: 18,000,000 HITS AND A VAPE MEET


 

Another million hits has ticked off the counter.  This couldnt have happened at a better time.  With 24 hours off – Im off to the Garden State Vapers Meet.   With over 50 vendors participating in giveaways and raffles.  All are free to join us. 

MEET INFO: https://www.facebook.com/

Download our Android App


Featured on our android app

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

DRIP DRIP DRIP: IGO-W STYLE WITH ETCHING – $4.99

IGO-W DRIPPER

The Igo-W is a large 3 post dripper thats purpose built for dual coil builds.  These drippers have a small lip on the deck which holds some extra juice for the wicks to soak up.  For $4.99 you cant beat it.

THE HARD COPY:

  • Dripping Atomizer
  • Stainless steel construction
  • Stainless 510 drip tip
  • Laser engraving ‘Sun’ logo
  • Single airhole located on outer casing (see images)
  • Chromed brass posts
  • Triple-post system for single/dual coil build
  • Build using silica wick and wire
  • Double o-ring seals on bottom base
  • Height without drip tip: 28.7mm / 1.12″ (Approx.)

 

 
$4.99 FREE SHIPPING


Featured on our android app

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

December 5, 2013

DROP: SMOKTECH ARO PRYEX GLASSOMIZER – $5.50

Smoktech Aro 3.0ml Pyrex Tank




Been using mine for a month or so now.  Fantastic Glassomizer!

Im going out on a limb and saying they are better then the EVOD.

The ARO is a bottom coil clearomizer tank system made by Smok Tech.  It is similar to the Kanger M3. Bottom coil clearomizers provide a nice warm vapor, with a superb clean flavor, and reduced wicking issues. The ARO Pyrex has a glass tank, replaceable atomizer head and holds about 3.5ml of e-liquid. The ARO has an eGo connector, but unlike most eGo clearomizers or cartomizers, the ARO uses the outer threads of the eGo battery.   The center post of the connector is unsealed.  There is a vent hole in the bottom of the tank which provides the right amount of airflow. 





 
These are the Pyrex glass version The lowest price I have ever seen for these. Foolish not to try a few at that price!  I bought one of each color



WHERE: http://www.exhalevapors.com

$5.50



Featured on our android app

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

FIRE IT UP: 30 GAUGE KANTHAL 100 FEET – $5.60 FREE SHIPPING


 

Here is a great deal on resistance wire.  A member of our Facebook group mentioned this deal to me.  Since this ships free, its the lowest price going. For just $5.60 you get 100 feet of 30 gauge kanthal.  Currently one of the favorite gauges for rebuilders.

Stock up and save!


THE HARD COPY:

  • Heat resistant up to 1400 degrees celcius
  • Resistance = 8.36 Ohms/ft at room temp
  • 0.01 in. .254 mm
  • Shape: Round
  • Great for rebuilding atty’s

WHERE: http://www.ebay.com

$5.60 FREE SHIPPING


Featured on our android app

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

MOJO DROPS A NEW MOD. I THINK?

Style of Mojo makers of the very popular Chi-You comes out with a new mod.


The Buffalo by Mojo

 Caravella Clone version 2.0 (18350)



When I first saw the The Buffalo – I knew I saw that mod before.  You have to admit the two pictures look shockingly similar.  Other than some polish and slightly different mixed color locations –  it seems to have already been cloned. 

I think im going to dub this the Mojovella.


Featured on our android app

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

THE NEXT WAVE: SEMI EXPENSIVE CLONES

Why don’t the anti clone community hate the Russian 91%?   Its simple.  Its expensive.  One thing clone haters dispise are CHEAP clones.  A $19.00 clone of a mod they paid $200.00 for makes their heads explode.  Understandably so.  

A new trend in the mod market is forming.   The middle of the road – semi expensive mechanical.   They will be built extremely well and in the $50-$90.00 range.   Some of these examples will be the new Poldiac 1 to 1, EhPro Nzonic Clone, and EhPro GGTS.   

These will capture the middle of the road market.  A middle market is the new target – were there is currently a void.  For the longest time its been a $20.00 clone or a $150.00+ high end mechanical.   Welcome to the “mid market”.  


Featured on our android app

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

JUST THE TIP – CHAOS STYLE DRIP TIPS w/ ENGRAVING – $2.81

Chaos style drip tips

These very smart toppers for your vape setup are constructed from stainless steel and engraved with the Chinese characters wu(2) xian(4) which means “infinite” or “immeasurable”. The large slanted mouth makes it ideal for dripping. 

Available individually for $2.81 or in 5-packs for $12.00 ($2.40 each).

Also available without engravings.  All are Stainless Steel

Our link below takes you to ALL the Chaos Style Tips.

WHERE: http://www.fasttech.com

AS LOW AS $2.40 EA


Featured on our android app

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone

December 4, 2013

ONE TO ONE: EHPro CLONES THE GGTS

EHpro GGTS – 1 to 1

EHpro is known for their almost perfect replicas of high end mods.  Their build quality is pretty incredible for a Chinese manufacturer.  Today they have made a 1 to 1 clone of one of the first and most sought after mechanicals – THE GGTS.

THE HARD COPY:

The GGTS is designed after an extremely popular mechanical mod from Greece. This mod features gold-plated brass contacts, stainless steel construction, airflow control, a telescoping body, a collection chamber for leaks and a design that allows the use of adapters without looking like there is an adapter at all. The GGTS will accept 18350, 18500, and 18650 IMR cells. Airflow can be adjusted simply by turning the ring at the top to expose multiple airholes. The connection at the top is unsealed, so that any leaking liquid can run down into the sealed collection chamber. This ensures that you will never be subject to liquid leaking all over your hands, or directly onto your battery. The GGTS has a side-mounted switch at the bottom, complete with a locking ring for safety.

The proven design of the GGTS meets the quality standards and price point that EHPro is known for. This is a great mod with a multitude of features.

WHERE: http://www.madvapes.com/

THE DEAL:
USE COUPON CODE lovetovape5 TO BRING THE TOTAL TO $56.99


Featured on our android app

Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on RedditShare on StumbleUponDigg thisEmail this to someone