Much cheaper then expected..
One of the most anticipated mods has arrived. Considering this device is both Variable Voltage and Variable Wattage in a single battery design – that price is good. This is cheaper then the original Vmax cost when it first came out. Smoktech had a price point set at about $225.00 but many of the vendors told them to drop dead. Thus, the 120.00 price tag. Not to mention its the chrome model.
This is an attempt by Smoktech to go for the jugular and dominate the APV market. I know of only a handful of mods that can do what this mod can (out of the box), and they are always sold out (i.e the darwin).
After running down my list and talking to vendors this is the cheapest price I can find. If someone is selling this product, and is reputable – please email us. When dealing with a brand new mod a vendors reputation is just as important as the price. Id rather spend a few $$ more knowing Im going to actually get my mod w/ a warranty.
|ZMAX is a Variable Voltage and Variable Wattage Device
Zmax can be adjusted from 3.0 – 6.0V volts in 0.1 volt increments
Zmax can adjust power from 3.0 – 15 watts in 0.1 watt increments
Built-in three digit display allows you to visually adjust your voltage,
LED blue display
Zmax can use one IMR 18650 Battery or holds two flat top designed
18350 IMR Batteries with existing battery cap
Zmax has battery reverse connect protection
Zmax PCB allows 5 Amperage output limit
Zmax button never gets stuck there’s a 360° turn around
1. Uu- Voltage up
Error codes :
LOR—Lower resistance indication;
If the resistance is below 1.2ohm,the display will show “Low Load”.
LOU—Lower voltage indication. If one 18650 battery voltage is below
3.4V or 2 18350 batteries Superposition voltage is below 6.4v,the
display will show “Low Voltage”.
WSC—Short circuit indication. If cartomizer/atomizer output port short-circuit,
the display will show “Warning Short Circuit”.
Low Battery Indicator — When the battery gets low the red lighted
push-button will slowly flash indicating that your battery is low